SOLICITATION NOTICE
89 -- 89--FCI La Tuna Subsistence FY23 Cheese
- Notice Date
- 7/12/2023 1:42:35 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 311941
— Mayonnaise, Dressing, and Other Prepared Sauce Manufacturing
- Contracting Office
- FAO GRAND PRAIRIE TX 75051 USA
- ZIP Code
- 75051
- Solicitation Number
- 15B51023Q00000013-11
- Response Due
- 7/14/2023 9:00:00 AM
- Archive Date
- 01/10/2024
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 15B51023Q00000013-11 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 311941 with a small business size standard of 850.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-07-14 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Anthony, TX 79821 The Federal Bureau of Prisons requires the following items, Meet or Exceed, to the following: LI 001: Cheese, Sliced, (Real Cheese, Not Imitation), As specified in the Code of Federal Regulations, TITLE 21, CHAPTER I, SUBCHAPTER B, PART 133 -- CHEESES AND RELATED CHEESE PRODUCTS , Subpart B, 133.173 ,One of the following cheeses, (To be determined by the FSA), Pasteurized Process Cheese American, Cheddar, Provolone, Swiss, Colby, or Monterey Jack . Each of the ingredients used in the food shall be declared on the label. Manufacturers letters will NOT be accepted in lieu of labeling. MUST HAVE A MINIMUM BESTBY DATE OF 6 MONTHS AFTER DELIVERY DATE., 120, LB; LI 002: Cheese, Cheddar, U.S. Grade AA or A, CID-A-A-20208C, Type I - Cheddar cheese (21 Code of Federal Regulations (CFR) �133.113), Style A, B, D , K (loaf, shredded coarse), Shred size 1, 2, or 3, Agricultural practice (a). Cheddar cheese is cheese made by the cheddaring process or by another procedure which produces a finished cheese having the same physical and chemical properties as the cheese produced by the cheddar process and is made from cow's milk with or without the addition of coloring matter and with common salt, contains not more than 39 percent of moisture, and in the water-free substance, contains not less than 50 percent of milk fat and conforms to the provisions of �19.500, Definitions and Standards of Identity for Cheese and Cheese Products. Food and Drug Administration (21 CFR 133.113). Manufacturers letters will NOT be accepted in lieu of labeling (Bidder needs to indicate if cheese is Loaf/Block or Shredded Coarse). Packaging: 5 lb to 40 lb sealed Bags or containers. MUST HAVE A MINIMUM BESTBY DATE OF 6 MONTHS AFTER DELIVERY DATE., 2040, LB; LI 003: Cheese, Mozzarella, Low-moisture Mozzarella, Part-skim Mozzarella, Low-moisture Part-skim Mozzarella. (CID-A-A-20248C) The mozzarella cheese must conform to the following list. Type I, II, III, or IV. Style A - Block (loaf), frozen, Style B - Shredded, individually quick frozen (IQF) or Style J - Sliced or Diced forms. Shred size 1,2, or 3. Agricultrual practice a. Milk fat range between 30.0 to 45.0 to 60.0 % on a dry basis depending on type. Moisture content range between 45.0 to 60.0 % depending on type. All ingredients must be declared by their common or usual name in descending order of predominance by weight. Manufacturers letters will NOT be accepted in lieu of labeling. Type and Style to be determined locally and size noted on bid. Packaging of Primary Container: 5 lb to 40 lb sealed Bags or containers. MUST HAVE A MINIMUM BESTBY DATE OF 6 MONTHS AFTER DELIVERY DATE., 1480, LB; Solicitation and Buy Attachments ***Question Submission: Interested Sellers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Federal Bureau of Prisons intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Federal Bureau of Prisons is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Sellers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Combined Synopsis/Solicitation This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and written solicitation will not be issued. In addition to providing pricing at www.unisonmarketplace.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to marketplacesupport@unisonglobal.com. Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid individual pricing for all required line items in order to be considered for award (i.e., Do not use the Included in another line item function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid Submit a Question feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid being determined to be non-responsive. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). Award Criteria-An award will be made to a responsive offeror (who submits all required submissions on time), whose past performance does not pose a risk to the Government, and whose offer is the Lowest Price Technically Acceptable (LPTA). An offer is technically acceptable if its technical capabilities conform to the Government's Statement of Work or listed specs whichever is applicable to the buy. For Exact Match Only Commodity Buys- NO SUBSTITUTIONS, EXACT MATCH ONLY. The vendor may not substitute any item/service listed on this order without prior written approval from the DHS/CBP Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this RFQ. Items/services that do not conform to descriptions and part numbers found in this RFQ will be rejected at the time of delivery causing a return at the vendor's expense. For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may be cause for termination. This information is REQUIRED in order for a sellers bid to be deemed 'responsive' and to be considered for award. FAR 52.211-6. To be considered for award, all Sellers must be manufacturer/ Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Sellers may be required to provide documentation as proof of authorization to be considered for award. (a) In accordance with sections 536 and 537 of the Commerce, Justice, Science, and Related Agencies Appropriations Act, 2014 (Title II, Division B, Pub. L. 113-76), none ofthe fundsmade available by that Act may be used to enter into a contract, memorandum of understanding,or cooperative agreement with a corporation -(1) convicted of a felony criminal violation under any Federal law within thepreceding 24 months, where the awarding agency is aware of the conviction, unless an agencyhas considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government, or(2) that has any unpaid Federal tax liability that has been assessed, for which alljudicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability,unless an agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government.(b) By accepting this award or order, in writing or by performance, the offeror/contractor represents that -(1) the offeror is not a corporation convicted of a felony criminal violation under anyFederal or State law within the preceding 24 months; and,(2) the offeror is not a corporation that has any unpaid Federal or State tax liabilitythat has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability. This solicitation is set aside for small business concerns with a size standard of 500 employees.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/4fa959614929485cafb959bef62b4e6b/view)
- Place of Performance
- Address: 8500 Doniphan Road , Anthony, TX 79821, USA
- Zip Code: 79821
- Country: USA
- Zip Code: 79821
- Record
- SN06746423-F 20230714/230712230048 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |