SOLICITATION NOTICE
F -- F--Well Drilling Supplies
- Notice Date
- 7/19/2023 12:11:03 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 221310
— Water Supply and Irrigation Systems
- Contracting Office
- W7NS USPFO ACTIVITY NC ARNG RALEIGH NC 27607-6412 USA
- ZIP Code
- 27607-6412
- Solicitation Number
- W91242-23-Q-0135
- Response Due
- 7/28/2023 2:00:00 PM
- Archive Date
- 01/24/2024
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W91242-23-Q-0135 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 221310 with a small business size standard of $41.00M. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-07-28 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Place of Performance. The National Guard - North Carolina requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: 8""x10' galvenized steal well casing Threaded and coupled, 100, Each; LI 002: 8"" x10' Stainless Well Screen .025"" slot size threaded and coupled to match well casing, 10, Each; LI 003: 7 7/8"" down hole hammer bit (QL6 must match on heand hammer body), 2, Each; LI 004: 7 7/8"" TRICONE ROLLER hard tooth button bit for air drilling, 2, Each; LI 005: 7 7/8"" TRICONE ROLLER jetted FOR MUD DRILLING (SEALED), 2, Each; LI 006: 12"" down hole hammer bit (QL80 must match on heand hammer body), 4, Each; LI 007: 12"" TRICONE ROLLER hard tooth button bit for air drilling, 2, Each; LI 008: 12"" TRICONE ROLLER jetted for mud drilling, 2, Each; LI 009: 2""x10' GALV T&C, 100, Each; LI 010: SIM3554, Seal/Well 8X2""Solid Stl, 8, Each; LI 011: 2 Galvanized 90 Elbow 8/16 Box QtySimilar to: 2G90, 10, Each; LI 012: 2"" galvenized steal cap, 10, Each; LI 013: Tape Pipe&Cable Wrap 2"" Grn Cold WeatherSimilar to: GREEN, 20, Each; LI 014: PVC Torque Arrestor W/Clamp 2"", 20, Each; LI 015: 8"" Drive Shoe galvenized steal for well casing, 4, Each; LI 016: Kopr-Kote Hd 1Gal LF 1/CASE (Pipe dope for well drilling), 3, Each; LI 017: Soda Ash 50Lb Bag, 15, Each; LI 018: Well Drilling foaming Agent;�Foaming Agent is an anionic surfactant which can be added to fresh water for air/foam, air/gel-foam, or mist drilling applications (Similar to: DPBAQF2-5 AQF-2 5Gal Baroid), 10, Each; LI 019: Well Drilling Liquid Polymer Dispersent; concentrated liquid polymer dispersant provides superior mud and sediment removal from the producing formation and gravel pack. This product is also a highly effective mud thinner. (Similar to: DPBAQUACLPFD-1 Aqua-Clear PFD 1Gal Pail Baroid), 5, Each; LI 020: Well Drilling wetting agent; water miscible, non-ionic wetting agent is designed to help counteract the sticking tendencies of clay. (Similar to: GP3AS20 DPBPENETROL-5 Penetrol 5Gal Pail Baroid), 2, Each; LI 021: Well Drilling Mudrilling fluid; viscosifier imparts viscosity, fluid loss control and gelling characteristics to freshwater-based drilling fluids. (Similar to: DPBQUIKGEL-50 Quik-Gel 50Lb Bag Bariod Drilling Fluids), 15, Each; LI 022: Well Drilling Clay shale stablizer; clay and shale stabilizer provides inhibition of clay and shale formations in water-based drilling fluids without substantially increasing viscosity (Similar to: QUICKGEL, DPBEZMUDG-40, EZ-Mud Gold 40Lb Can Baroid), 2, Each; LI 023: Mud Drilling Plugging material; one-sack granular bentonite product is intended for use as an easily mixed grouting and plugging material.��(Similar to: EZMUD40, DPBEZSEAL-50, E-Z Seal 50 Lb), 25, Each; LI 024: Mud Drilling Mud 3/8"" Chips;a naturally occurring Wyoming sodium bentonite clay, sized and graded chip material used to seal and plug earthen boreholes. (Similar to: EZ-SEAL, Similar to: EZ-SEAL, Holeplug 3/8 50Lb Baroid), 25, Each; LI 025: Mud Drilling Mud 8 Mesh Fine Chip; sealing and plugging agent is a granular (8-mesh), natural Wyoming sodium bentonite for use in sealing and grouting well casings (Similar to: HOLEPLUG, DPBNSEAL-30, N-Seal 30Lb Bag Baroid), 25, Each; LI 026: Mud Drilling foaming Agent; blend of surfactants that can be added to fresh, brine, or brackish water for air/foam, air/gel-foam, or mist drilling (Similar to: NSEAL, QUICK-FOAM HP, Baroid), 10, Each; LI 027: Mud Drilling Circulation loss Polymer additive; highly dispersable, polyanionic cellulosic (PAC) polymer, provides ease of mixing and improved filtration control in most water-based drilling fluids Similar to: DPBQUIKTROL-40, Quik-Trol Gold 40Lb Can, 5, Each; LI 028: MAJL10123, Kopr-Kote Hd 1Gal LF 1/CASE, 1, Each; LI 029: Portland Cement Type 100 Lb, 100, Each; LI 030: GF45S75-18-4, PE 45GPM 7.5HP 18 Stage 98924052, 4 Motor Bracket Well Pump, 1, Each; LI 031: Check Valve 2"" Galvenized Steal Similar to Partt Number: type SIM506SB, 8, Each; LI 032: GF85S200-18, 6 inch 20HP 85GPM 18 Stage Pump End, 12B60018 Water Pump, 1, Each; LI 033: GF85S300-27, 6 inch 30HP 85GPM 27 Stage Pump End, 12B60027 Water Pump, 1, Each; LI 034: GM7543, 7.5HP 460V 3W 3PH 4Motor 96405814 Water Pump Motor, 1, Each; LI 035: 6G20463SS, 6 Motor 20HP 460V 3PH 96166166, Stainless Steel MS6000QFT40 Water Pump Motor, 1, Each; LI 036: 6G30463SS, 6 Motor 30HP 460V 3PH 96166168Stainless Steel MS6000QFT40 Water Pump Motor, 1, Each; LI 037: Pump control box: PHASE TECH 3LHS230R-HL10, 3LHS230R-HL10S1 30HP VFD, 2, Each; LI 038: Pump transducer: GFCU92506685, Transducer for CU301 92506685, Replaces 98393361,Superseded Prod: GFCU98393361, 1, Each; LI 039: PC2/0-341, PC2/0-341 2/0 FLAT JACKETED PUMP CABLE, 2500, Each; LI 040: Wire Splice Kit #2 Awg 4-Pak Hd Clear for submersable electrical wire, 10, Each; LI 041: Filter Media, Highly pure quartzte, medium grain .5 cu ft, 25, Each; Solicitation and Buy Attachments ***Question Submission: Interested Sellers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - North Carolina intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - North Carolina is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Sellers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The Govt will award a firm-fixed priced contract to the responsible offeror representing the best value to the govt, using a streamlined comparative trade-off evaluation IAW FAR 12.602 & 13.106-2 and the below, which may result in award to other than lowest priced quote. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-2, Evaluation- Commercial Items; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be ""ACTIVE"" at the time of award. Bid MUST be good for 30 calendar days after close of Buy. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/3349a6bf710d4df399fdaacd405a137f/view)
- Place of Performance
- Address: See Place of Performance.
- Record
- SN06754816-F 20230721/230719230042 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |