SOLICITATION NOTICE
36 -- Portable Laser Marker
- Notice Date
- 8/10/2023 9:52:26 AM
- Notice Type
- Presolicitation
- Contracting Office
- FA8125 AFSC PZIMA TINKER AFB OK 73145-3303 USA
- ZIP Code
- 73145-3303
- Solicitation Number
- FA8125-23-Q-0091
- Response Due
- 8/11/2023 7:00:00 AM
- Archive Date
- 08/26/2023
- Point of Contact
- Sheridan Robison
- E-Mail Address
-
sheridan.robison@us.af.mil
(sheridan.robison@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The Air Force intends to solicit the following supply: The 76th AMXG/564 is requesting utilization of funds for the purchase of one (1) Portable Laser Maker. The requested equipment item description / Specifications are outlined below. Quantity of One (1) Portable Laser Maker. Startup: (1) Five (5) days of Installation and Training at Tinker Air Force Base, OK. (2) Maintenance kit and instructions shall have a minimum of ten (10) replacement consumables such as belts and filters. Standards: (1) Shall comply with direct marking SAE specifications AS5942 or AS5649 (2) Shall comply with BAC 5152 Wire Processing / Handling / Printer (1) Powered coiling pan. (2) Knot and splice detection. (3) Wire size and cut capability � 26 AWG to 6 AWG (4) Measure and cut capability. (5) Shall have a minimum speed of 25 meters per minute. (6) Shall have upper- and lower-case text marking capability on wires. (7) Table-top unpowered de-reeler. (8) Wire tension monitoring to ensure wires are not over tensioned when being marked. Power Requirements (1) Electrically powered by standard 120VAC 20A. (2) Device shall not require compressed air to operate. Site Constraints: (1) Plug Configuration shall be NEMA 5-15P. (2) Dimensions: De-reeler and wire marker shall fit within a 65�(L) x 30� (W) x 40� (H) Space. Control: (1) User control screen built into device. (2) User control interface must be touchscreen. A Firm Fixed Price type contract is contemplated. Estimated Period of Performance: �30 days ARO This is a small business set-aside System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 333914with a size standard of 750 EMP. Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through Beta.sam.gov at https://sam.gov/content/home.� No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1). For further information contact: Sheridan Robison Contracting Officer
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/257c9d5a2f47455f88e12d82fa1a5258/view)
- Place of Performance
- Address: Tinker AFB, OK 73145, USA
- Zip Code: 73145
- Country: USA
- Zip Code: 73145
- Record
- SN06785481-F 20230812/230810230054 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |