SOLICITATION NOTICE
84 -- Enhanced Small Arms Protective Insert (ESAPI)
- Notice Date
- 8/21/2023 6:39:19 AM
- Notice Type
- Presolicitation
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111-5096 USA
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE1C123R0111
- Archive Date
- 10/01/2023
- Point of Contact
- Kimberly Sabo
- E-Mail Address
-
kimberly.sabo@dla.mil
(kimberly.sabo@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This acquisition is for the manufacture and delivery of Enhanced Small Arms Protective Insert (ESAPI). The ESAPI shall be manufactured in accordance with CO/PD 04-19 REV J, Amendment 3 dated 24 July 2020. In accordance with FAR Part 19 The solicitation will result in 2 equal lots with 2 planned awards. Lot 1 will contain 50% of the quantity and will be issued as a Total Small Business Set Aside. Lot 2 will contain 50% of the quantity and will be issued as a HUBZone Small Business Set Aside. Lot 1 - Total Small Business Set Aside� Minimum: FAT Maximum: 182,400 ����������������������� Lot 2 -HUBZone Small Business Set Aside������� Minimum: FAT Maximum: 182,400 A long-term Indefinite Quantity, Firm Fixed-Priced Tiered Contract is planned consisting of 3 (three) separately priced ordering periods. Pricing period 1 will consist of an 18-month ordering period to account for first article testing while Pricing periods 2 and 3 will be a 12-month ordering period respectively for a total ordering period of 42-months. Furthermore, fist article requirements will be separately priced and constitute the contract�s guaranteed minimum requirements. The government will not be bound to place delivery orders beyond the first article requirements. This to ensure vendors receive first article and full rate production approvals prior to obligating funds against the contracts. A Best Value, Trade-Off Source Selection procedures will be utilized to evaluate proposals. Evaluation factor will be: Past Performance, Performance Confidence Assessment. The estimated release date of the solicitation is September 2023. � The Defense Logistics Agency (DLA) limits distribution of export-controlled technical data to DLA contractors that: -have an approved US/Canada Joint Certification Program (JCP) certification, -have completed the �Introduction to Proper Handling of DOD Export Controlled Technical Data Training� and the DLA �Export-Controlled Technical Data Questionnaire� (both are available at the web address given below), -have been approved by the DLA controlling authority to access the export controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM). 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their SAM registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as �The Berry Amendment�) impose restrictions on the DoD�s acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for DLA Troop Support Clothing and Textiles solicitations, use the following link to the DLA Troop Support Clothing and Textiles Technical Data Repository area at http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/a152ec8f307d40cb81a3e04d0b443872/view)
- Record
- SN06800260-F 20230823/230821230058 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |