SOURCES SOUGHT
66 -- Intent to Sole Source - Accessory-LVDT (A-LVDT) components
- Notice Date
- 8/21/2023 3:16:16 PM
- Notice Type
- Sources Sought
- Contracting Office
- W6QM MICC-YUMA PROV GRD YUMA PROVING GROUND AZ 85365-9498 USA
- ZIP Code
- 85365-9498
- Solicitation Number
- PANMCC23P0000008976
- Response Due
- 8/28/2023 7:00:00 AM
- Archive Date
- 09/12/2023
- Point of Contact
- Monica Gehrer, Phone: 9283282978, Fax: 9283286534
- E-Mail Address
-
monica.j.gehrer.civ@army.mil
(monica.j.gehrer.civ@army.mil)
- Description
- Sole Source Intent:� The United States Army, Mission and Installation Contracting Command (MICC) Yuma Proving Ground, U.S. Army Yuma Proving Ground (USAYPG), Yuma, Arizona, intends to negotiate a firm-fixed price contract on a sole source basis with to Laser Techniques Company, LLC (UEI XKNYRDF3RMT6), 11431 Willows Rd NE Ste 100, Redmond, WA, 98052-2501. The resultant contract will be a firm Fixed Priced (FFP) contract consisting of an Enhanced Data Analysis Workstation that shall include following components: one (1) High Performance Data Analysis Workstation Computer Desktop System; two (2) Dual monitor shall be equal or better 4K UHD (3840x2160) Monitor, 33 inches curved screen; one (1) Hard drives storage shall be minimum 32 TB 4 bays network attached storage; one (1) New setup workstation LaserViewer Analysis modules by using existing YPG dongle serial keys; one (1) Uninterrupted power supply shall be equal or larger 1500Watts; one (1) Microsoft Office Professional shall be provided current or newest version. The 120mm M298 Calibration Set shall include the following: one (1) Gun Tube Adapter 120mm Self Propelled Unit (SDU), Part Number: GTA-120-M298-SP; one (1) 120mm M298 LVDT calibration ring, Part Number: CAL-120-LVDT-B; one (1) Custom shipping case for GTA and LVDT Calibration ring, Part Number: SHP-CASE-L. The 155mm M776 LVDT calibration Set shall include the following: one (1) Calibration Guide Tube Assembly, M776 for use with and without a muzzle brake, Part Number: GTA-155-M776/M284-MB; one (1) Calibration ring for use with YPG 155mm LBIS portable system, Part Number: CAL-155-B; one (1) Custom shipping case for GTA and LVDT Calibration ring, Part Number: SHP-CASE-L. The 155mm XM908 LVDT Guide Tube Adapter Set shall include the following: one (1) Calibration Guide Tube Assembly (GTA),155mm XM908, for use with and without a muzzle brake, Part Number: GTA-155-XM908; one (1) Hard sided shipping case for GTA 155mm XM908 and calibration ring, Part Number: SHP-CASE-L.� Also included: one (1) 120mm LVDT precision Bore Scanner, Part Number: SCN-120-LVDT-B; one (1) Umbilical Cable for Self-Propelled SDU, LVDT/LP, 2CH, 35ft, Part Number: UMB-SP-LVDT-35; one (1) Upgrade Existing YPG Self-Propelled SDU for use with current YPG Bore LVDT Systems. US Army Yuma Proving Ground shall furnish to contractor following test items for upgrade, system configuration and integration: One each, 105-120mm Self-propelled SDU. ��Pursuant to the Federal Acquisition Regulation (FAR) 13.106-1(b)(1)(i), the Contracting Officer may solicit from one source if the Contracting Officer determines that the circumstances of the contract action deem only one source reasonably available. LTC is the only source capable of providing the required A-LVDT components that meet the form, fit, and function with the existing USAYPG A-LVDT. This requirement for the Accessory-LVDT (A-LVDT) components are in support of existing equipment that was previously purchased under contracts W9124R22P0009 and W9124R22P0026. This new acquisition acquired under this purchase must be form, fit, function, and software compatible and interact with existing LTC laser- based inspection systems located at USAYPG. If this new acquisition was acquired from any other source, USAYPG would be forced to procure a new 155mm full turn-keyed laser tube measurement and inspection system, which would result in a waste of over a hundred thousand dollars in investment, plus loss of the existing capability of current equipment. This requirement will be procured using the acquisition procedures in Federal Acquisition Regulation (FAR) Part 13 Simplified Acquisition Procedures.� The North American Classification System (NAICS) code is 334519 � �Other Measuring and Controlling Device Manufacturing� with a size standard of 600 employees.� THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS.� All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency; however, a determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government.� In order to protect proprietary information and prevent the unintentional releasing of guarded information all interested firms must conduct their own research regarding the specifications of the above listed requirement.� If you feel your firm possesses the ability to meet these requirements, then you must respond by demonstrating your firm's technical capability to meet these requirements no later than 08:00 AM MST on 28 August 2023 to monica.j.gehrer.civ@mail.mil.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/8628783e66134115a2348e3a65bd5378/view)
- Record
- SN06800398-F 20230823/230821230059 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |