SAMDaily.us | PRESOL | 99 | RRB BENACHMADE KNIVES

SAMDAILY.US - ISSUE OF AUGUST 26, 2023 SAM #7942
SOLICITATION NOTICE

99 -- RRB BENACHMADE KNIVES

Notice Date: 8/24/2023 1:21:50 PM
Notice Type: Solicitation
NAICS: 332215 — Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing
Contracting Office: W7N1 USPFO ACTIVITY TN ARNG NASHVILLE TN 37204-1502 USA
ZIP Code: 37204-1502
Solicitation Number: W912L723Q0514
Response Due: 8/29/2023 9:00:00 PM
Archive Date: 09/14/2023
Point of Contact: RHONDA LIEN, Phone: 6153130530, Teresa Baxter, Phone: 6153132658
E-Mail Address: rhonda.m.lien.civ@army.mil, teresa.a.baxter.civ@army.mil
(rhonda.m.lien.civ@army.mil, teresa.a.baxter.civ@army.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: Request for Quote (RFQ) � Benchmade Knives This requirement is being advertised as Brand Name, Small Business set-aside. The Government considers the Benchmade Knives a product, which demonstrates the level of quality desired by this solicitation.� However, the brand name or equivalent are acceptable quotes and must meet the Salient Characteristics. Mentioning of this brand name will not be construed as limiting competition. Evaluation factors for this award are Technical/Salient Characteristics of the Solicitation. Award will be determined by product compatibility with salient characteristics, and delivery terms if applicable. To be determined an equal product the equal product should meet the salient characteristics and will be determined by the contracting officer and end user. The Tennessee Army National Guard (TNARNG) Purchasing and Contracting Office for United States Property and Fiscal Office (USPFO) TN located at 3041 Sidco Drive, Nashville, TN 37204 is issuing an RFQ for commercial single award contract in accordance with (IAW) the format in Federal Acquisition Regulations (FAR) subpart 12 as supplemented with additional information included in this notice. The North American Industry Classification System (NAICS) code for this requirement is 332215 Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing with a size standard of 750 number of employees. This documentation incorporates provisions and clauses that are in effect through the Federal Acquisition Circular (FAC) 2023-04 effective date 06/02/2023. The Government intends to award a single Firm Fixed Price contract. This solicitation is set aside to Small Business set-aside. Quotes are due in this office no later than Wednesday, 30 August 2023 at 11:00 AM Central Standard Time. Vendor must submit quote on time. Please refer to Evaluation factors for more information regarding evaluation of quotes. When submitting a quote, vendor must include in their quote the following information: Unique Entity Identifier (UEI), Tax ID, Completed FAR clause 52.204?24 and POC information. All charges must be inclusive. Shipment: FOB: Destination NO DELIVERIES ON MONDAY Ship to: TNARNG RRB Marketing ATTN: MSG Austin Phelps 3041 Sidco Dr Nashville, TN 37204 Retention program Knives Must include custom laser marking with TNARNG logo. Knife price point must be $50 or less per NGR601-1 PPPI Regulation 400 total knives required. Logo to be provided by government. Benchmade Knife #1: 200 ea QTY Required Specs: Mechanism: AXIS� for safety Blade Length:3.72""9.45cm Blade Thickness:0.124"" | 3.150mm Open Length:8.72"" | 22.15cm Closed Length:5.0"" | 12.70cm Handle Thickness:0.63"" | 16.00mm Weight:4.97oz | 140.90g Required Features: Blade Edge: �� Serrated Blade Finish/Color: �� Black, Coated Blade Steel: �� CPM-S30V (58-60 HRC) Blade Style/Shape: �� Drop-point Clip Type: �� Deep-Carry Clip Position: �� Reversible Tip-Up Glass Breaker: �� No Handle Material: �� CF-Elite� Handle Color: �� Black Lanyard Hole: �� Yes Use: �� Every Day, Tactical Benchmade Knife #2: 200 ea QTY Required Specs: Mechanism: �� AXIS� for safety Action:�� Manual-opening Blade Steel:�� S30V | 58-60 HRC Blade Length: �� 2.91"" | 7.39cm Blade Thickness:�� 0.100"" | 2.540mm Open Length:� �� 6.78"" | 17.22cm Closed Length:�� 3.87"" | 9.83cm Handle Thickness:�� 0.51"" | 12.954mm Weight:�� 2.81oz. | 79.66g Required Features: Blade Edge: �� Serrated Blade Finish/Color �� Black, coated Blade Steel: �� CPM-S30V (58-60 HRC) Blade Style/Shape: �� Drop-point Clip Type: �� Standard Clip Position: �� Reversible Tip-Up Handle Material: �� Glass-Filled Nylon Handle Color: �� Gray/Black Lanyard Hole: �� Yes Blade Style: �� Plain Drop-Point 52.212?2 Evaluation?Commercial Items. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical � To be considered for award process, vendor must submit offer on time. The following sub-factors are considered in this buy: Technical � (1) offers must meet or exceed the salient characteristics specified in this solicitation. Vendor must clearly identify the item by: Brand Name, if any; and Part number or model number; include descriptive literature or a clear reference to furnished descriptive data or other pertinent information available to the Contracting Officer. Include also pictures for reference. (2) Brand Name (3) Delivery Information. (4) Warranty. Vendor must be active in SAM. Must provide delivery information to include lead time and any other relevant information. FOB: Destination Compliant with DFARS clause 252.225-7001; Buy American and Balance of Payments Program�Basic Price- Past Performance. Technical and past performance, when combined, are more important than price. Options. NOT APPLICABLE. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract further action by either party. Before the offer�s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) CLAUSES INCORPORATED BY FULL TEXT 52.212-1 Instructions to Offerors�Commercial Products and Commercial Services. Instructions to Offerors�Commercial Products and Commercial Services (Mar 2023) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition� Is set aside for small business and has a value above the simplified acquisition threshold; Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value. Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show� The solicitation number; The time specified in the solicitation for receipt of offers; The name, address, and telephone number of the offeror; A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; Terms of any express warranty; Price and any discount terms; ""Remit to"" address, if different than mailing address; A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); Acknowledgment of Solicitation Amendments; Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information or reject the terms and conditions of the solicitation may be excluded from consideration. Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers unless another time period is specified in an addendum to the solicitation. Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender�s request and expense, unless they are destroyed during preaward testing. Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. Late submissions, modifications, revisions, and withdrawals of offers. Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. ? Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is ""late"" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and- If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government�s control prior to the time set for receipt of offers; or If this solicitation is a request for proposals, it was the only proposal received. However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror�s initial offer should contain the offeror�s best terms from a price and technical standpoint.� However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.� Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. Availability of requirements documents cited in the solicitation. (1) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L�Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978. If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: ASSIST ( https://assist.dla.mil/online/start/). Quick Search ( http://quicksearch.dla.mil/). Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by- Using the ASSIST Shopping Wizard ( https://assist.dla.mil/wizard/index.cfm); Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462. Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. Unique entity identifier.(Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation ""Unique Entity Identifier"" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier. [Reserved] Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: The agency�s evaluation of the significant weak or deficient factors in the debriefed offeror�s offer. The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror. The overall ranking of all offerors, when any ranking was developed by the agency during source selection. A summary of the rationale for award; For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror. Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency. (End of provision) � 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. As prescribed in 4.2105(a), insert the following provision: Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it ""does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument"" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services�Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it ""does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services"" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3. Definitions. As used in this provision� Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. Prohibition. Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to� Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to� Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for ""covered telecommunications equipment or services"". Representation. The Offeror represents that� It ? will, ? will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds ""will"" in paragraph (d)(1) of this section; and After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that� It ? does, ? does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds ""does"" in paragraph (d)(2) of this section. Disclosures. Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded ""will"" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer: For covered equipment� The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known); A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. For covered services� � If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded ""does"" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer: For covered equipment� The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known); A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. For covered services� If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (End of provision) � 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders�Commercial Products and Commercial Services. As prescribed in 12.301(b)(4), insert the following clause: Contract Terms and Conditions Required To Implement Statutes or Executive Orders� Commercial Products and Commercial Services (Mar 2023) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L. 115-91). 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232). 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801). 52.233-3, Protest After Award (Aug 1996) ( 31 U.S.C. 3553). 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)). The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.] � �(1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 4655). � �(2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C. 3509)). � �(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) __ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note). � �(5) [Reserved]. � �(6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). � �(7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). __ (8) 52.209-6, Protecting the Government�s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) ( 31 U.S.C. 6101 note). � �(9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313). � �(10) [Reserved]. � �(11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a). � �(12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a). � �(13) [Reserved] _X_ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644). � �(ii) Alternate I (Mar 2020) of 52.219-6. � �(15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644). � �(ii) Alternate I (Mar 2020) of 52.219-7. �X �(16) 52.219-8, Utilization of Small Business Concerns (Oct 2022) ( 15 U.S.C. 637(d)(2) and (3)). � �(17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2022) ( 15 U.S.C. 637(d)(4)). � �(ii) Alternate I (Nov 2016) of 52.219-9. � �(iii) Alternate II (Nov 2016) of 52.219-9. � �(iv) Alternate III (Jun 2020) of 52.219-9. � �(v) Alternate IV (Sep 2021) of 52.219-9. (18) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) ( 15 U.S.C. 644(r)). � �(ii) Alternate I (Mar 2020) of 52.219-13. � �(19) 52.219-14, Limitations on Subcontracting (Oct 2022) ( 15 U.S.C. 637s). � �(20) 52.219-16, Liquidated Damages�Subcontracting Plan (Sep 2021) ( 15 U.S.C. 637(d)(4)(F)(i)). � �(21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Oct 2022) ( 15 U.S.C. 657f). � �(22) (i) 52.219-28, Post Award Small Business Program Representation (Mar2023)( 15 U.S.C. 632(a)(2)). � �(ii) Alternate I (Mar 2020) of 52.219-28. � �(23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) ( 15 U.S.C. 637(m)). � �(24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) ( 15 U.S.C. 637(m)). � �(25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)). � �(26) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15U.S.C. 637(a)(17)). __ (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755). � �(28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Dec 2022) (E.O.13126). � �(29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). � �(30) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246). � �(ii) Alternate I (Feb 1999) of 52.222-26. � �(31) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212). � �(ii) Alternate I (Jul 2014) of 52.222-35. � �(32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793). � �(ii) Alternate I (Jul 2014) of 52.222-36. � �(33) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212). __ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). _X_ (35) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O. 13627). � �(ii) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627). ��(36) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially avail...
Web Link: SAM.gov Permalink
(https://sam.gov/opp/e37e37ea924045c8b9330e51e2fb3cba/view)
Place of Performance: Address: Nashville, TN 37204, USA; Zip Code: 37204; Country: USA
Record: SN06806609-F 20230826/230824230102 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

99 -- RRB BENACHMADE KNIVES