SAMDaily.us | PRESOL | 78 | 78--fitness equipment

SAMDAILY.US - ISSUE OF AUGUST 31, 2023 SAM #7947
SOLICITATION NOTICE

78 -- 78--fitness equipment

Notice Date: 8/29/2023 1:27:36 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 339920 — Sporting and Athletic Goods Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: JBLM555
Response Due: 9/1/2023 8:30:00 AM
Archive Date: 02/28/2024
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is JBLM555 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-05. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-09-01 11:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be JBLM, WA 98422 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Olympic plates. Rubber/urethane-coated Olympic plates, 45 lb plates. Grip cutouts are acceptable, but plates must be round. Fits standard barbell., 20, pairs; LI 002: Olympic plates. Rubber/urethane-coated Olympic plates, round, 25 lb plates. Fits standard barbell., 8, pairs; LI 003: Change plates. Rubber/urethane coated. 10 lb. Fits standard barbell., 20, pairs; LI 004: Change plates. Rubber/urethane coated. 5 lb. Fits standard barbell., 20, pairs; LI 005: Change plates. Rubber/urethane coated. 2.5 lb. Fits standard barbell., 12, pairs; LI 006: Bumper plates. Crumb rubber, suitable for outdoor use. 45 lb. Fits standard barbell., 32, pairs; LI 007: Bumper plates. Crumb rubber, suitable for outdoor use. 25 lb. Fits standard barbell., 24, pairs; LI 008: Bumper plates. Crumb rubber or similar, suitable for outdoor use. 10 lb. Fits standard barbell., 24, pairs; LI 009: Barbell collars. Durable plastic material, lever-securing, rubber barbell sleeve contact area., 30, EA; LI 010: Powdercoated weight training axle. 1.9-diameter axle with standard plate loading capability., 4, EA; LI 011: Axle collars. Aluminum with rubber bar contact. Lever-securing to 1.9 diameter axles., 4, pairs; LI 012: Womens barbell, 15 kg, 25 mm diameter, constructed with bushings in bar sleeves. Dual knurl marks for powerlifting and weightlifting; no center knurl. Non-abrasive grip. Black electrically-applied coat shaft for improved durability., 6, EA; LI 013: Men's barbell, 20 kg, 28.5 mm diameter, constructed with bushings in bar sleeves. Dual knurl marks for powerlifting and weightlifting, no center knurl. Non-abrasive grip. Black zinc electrically-applied coating for improved durability., 14, EA; LI 014: Medicine balls. Gel-filled, 10-lb weight, 9-in diameter textured rubber shell., 16, EA; LI 015: Medicine balls. Gel-filled, 20-lb weight, 9-in diameter textured rubber shell., 16, EA; LI 016: Farmers walk handles. Capable of standard weight plate loading, handles must extend off the bar., 4, pairs; LI 017: Safety squat bar. 70 lb bar with 1.5-in diameter formed steel shaft and 1-in diameter steel handles. Heavy duty vinyl padding with closed-cell foam. Black cerakote finish or similar., 4, EA; LI 018: Barbell holder. Floor-based holder secures barbells in place upright, capable of storing 10 barbells., 2, EA; LI 019: Trap bar. High quality frame with steel tubing and black powder coat, 60 lb or similar. Must have knurled handles and be compatible with standard plates., 4, EA; LI 020: Flat utility bench. Sturdy steel construction with welded joints. Foam pad for user comfort and wide-set legs for stability. Color: black., 4, EA; LI 021: Adjustable bench. High quality 3x3-in steel frame with padding for user comfort. Adjustable to 10 back pad positions and 3 seat positions. Color: black., 4, EA; LI 022: 3-tier fitness equipment storage system. Specifications: 76 in wide, 75.5 in high, with 70 in shelves, or similar. Capable of storing bumper plates, medicine balls and a variety of fitness equipment, including up to 1,000 lb of weights., 1, EA; LI 023: Vertical plate tree. Steel frame with six storage pegs (12-in or greater) for plates. (of 5 total plate trees we seek 3 plate trees without wheels, 2 plate trees with wheels)., 5, EA; LI 024: Belt squat machine. Freestanding device made of high quality 3x3-in steel framing with steel plate for sturdy footing. Includes belt and safety racking mechanism. Footprint must not exceed 55x62-in., 1, EA; LI 025: Safety spotter arms. Must be compatible with Rogue Monster Lite racks. High quality 3x3-in steel tubing with welded end plates. Must have top plastic cover to protect bars., 2, pairs; LI 026: Jerk blocks. Stackable 2-in blocks made of durable plastic; wood blocks are not acceptable. Must include interlocking tooth feature to enable stacking and cutout handles for easy maneuvering., 36, EA; LI 027: Gym timer. Programmable gym timer with LED display and remote control. Must measure at least 25x7-in, with 4-in numbers., 1, EA; LI 028: Weight pulley system. Portable pulley system with weight loading capacity of at least 500 lb. Must include loading pin, straps, pulley, cable, and carabiners. Substitutions must meet or exceed quality of Spud Inc. econo tricep and lat pulley system., 4, EA; LI 029: Sandbags. Durable reinforced Cordura material required, with nylon handles. 24 x 9 in or similar., 5, EA; LI 030: Sandbags. Durable reinforced Cordura material required, with nylon handles. 19.5 x 7 in or similar., 5, EA; LI 031: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 18 lb., 8, EA; LI 032: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 26 lb., 10, EA; LI 033: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 35 lb., 12, EA; LI 034: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 44 lb., 12, EA; LI 035: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 53 lb., 12, EA; LI 036: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 62 lb., 8, EA; LI 037: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 70 lb., 8, EA; LI 038: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 80 lb., 6, EA; LI 039: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 88 lb., 2, EA; LI 040: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 97 lb., 2, EA; LI 041: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 106 lb., 2, EA; LI 042: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 124 lb., 2, EA; LI 043: Center mass bells. Cast iron with powdercoat finish; open-ended with interior handle. 150 lb., 2, EA; LI 044: Shipping requires delivery with liftgate capability., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Sellers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Sellers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) codefor this procurement can be found. The small business sizestandard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel CommandOffice of Command Counsel-Deputy Command Counsel4400 Martin RoadRm: A6SE040.001Redstone Arsenal, AL 35898-5000Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.milThe AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/.If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of GovernmentBuildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;252.243-7001, Pricing of Contract Modifications; 252.246-7000, Materialinspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an all-or-nothing basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Reporting During Contract Performance Equal Opportunity Prohibition on a ByteDance Covered Application
Web Link: SAM.gov Permalink
(https://sam.gov/opp/ffbd5ada11aa4711b86f257e9dd611d5/view)
Place of Performance: Address: corner 12th St and 32nd Division Dr Bldg P12741, JBLM, WA 98422, USA; Zip Code: 98422; Country: USA
Record: SN06811548-F 20230831/230829230107 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

78 -- 78--fitness equipment