SOURCES SOUGHT
U -- U--RFI - Innovative Profesional Development Training with workshop
- Notice Date
- 11/14/2023 10:48:34 AM
- Notice Type
- Sources Sought
- NAICS
- 611430
— Professional and Management Development Training
- Contracting Office
- W6QM MICC-FDO FT CAVAZOS FORT CAVAZOS TX 76544-0000 USA
- ZIP Code
- 76544-0000
- Solicitation Number
- W9115124Q0004
- Response Due
- 11/17/2023 9:00:00 AM
- Archive Date
- 05/15/2024
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Description
- This Sources Sought Notice/Request for Information is intended for information and planning purposes only and shall not be construed as a commitment or a promise of a contract by the Government. This is not a solicitation. This notice does not constitute an Invitation for Bid, Request for Quote, or Request for Proposal, nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice. The Notice ID is W9115124Q0004 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The SSN/RFI document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 611430 with a small business size standard of $15.00M. This requirement is unrestricted and only qualified sellers may submit bids. The SSN/RFI on https://marketplace.unisonglobal.com will start on the date this is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-11-17 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions. The MICC Fort Cavazos requires the following items, Meet or Exceed, to the following: LI 001: 1 week development training with accessibility to Classrooms, meeting rooms, and breakout rooms that will hold approximately 60 personnel with access to all forms of prototyping capabilities such as 3D printing, laser cutting, metal and wood fabrication., 1, Job; Solicitation and Buy Attachments ***Question Submission: Interested Sellers must submit any questions concerning the SSN/RFI at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the SSN/RFI may not be considered.*** For this SSN/RFI, MICC Fort Cavazos intends to document responses online to be facilitated by the third-party Marketplace, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to document responses. Sellers may submit responses during the specified period of time. MICC Fort Cavazos is taking this action in an effort to improve both Seller access and awareness of requests and the agency's ability to gather multiple responses.All responsible Sellers that respond to this SSN/RFI MUST submit the responses using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or submit a response on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Sellers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In responding to this request for quote, you must provide the manufacturer'sname and part numbers AND salient characteristics of the items you areproposing to sell to the Government. Regardless of the terminology used ineach RFQ (""Brand Name or Equal"", or ""meet minimum stated specifications),the information describing what you are offering must be physically writteninto the seller's bid specification block. Salient characteristics aredefined as ""pronounced features of an item that identify it describe itssize and composition, functional intent, and/or operational capabilities orlimits."" When researching product capabilities, you must, as a minimum,respond with feature for feature comparisons in order for your product to betechnically evaluated for sufficiency. Responses such as ""bidding exactmatch"", ""as specified"", or cutting and pasting the Government'sspecification information into the seller's bid specification block are notacceptable responses. Offerors who respond in any of the three examplesdirectly above will be eliminated from the competition without considerationof their offer. If you are bidding the same product as is being requested,your seller bid specification should indicate: ""Bidding on Manufacturer(Insert Name) and Part Number (Insert Number). If you are bidding on an ""orequal"" product, your seller bid specification must state: Bidding onManufacturer (Insert Name) and Part Number (Insert Number), containing thefollowing salient characteristics (insert salient characteristics). If yourresponse does not contain all of the required information called out in thisnotice, your quote will be determined nonresponsive and will not beconsidered for award. The apparent awardee shall acknowledge acceptance of any and all re-postings (amendments), in writing, prior to any award resulting from this solicitation. The applicable NAICS code for this procurement is _611430________with the related size standard of _$15 million_________. TheNAICS code identified herein must appear in FAR 52.212-3 ""OfferorRepresentations and Certifications"" in SAM and the vendor must be activelyregistered in that NAICS prior to receipt of quote in order to receive anaward. Offeror are reminded that failure to comply shall render their quoteas non-responsive. Unison Marketplace is a mechanism used by this office to solicit for common usecommercial items in accordance with FAR 13.5. Unison Marketplace is NOT a forum forfiling protests against the Government. Attempts to file protests throughUnison Marketplace will not be considered legitimate as they do not conform to therequirements in the Federal Acquisition Regulation (FAR). It is preferablethat disputes and protests be resolved as quickly as possible at the lowestlevel possible before considering the more formal process described below.The HQ, AMC-Level Protest Program is intended to encourage interested parties toseek resolution of their concerns within AMC, as an Alternate DisputeResolution forum, rather than filing a protest with the GovernmentAccountability Office (GAO) or other external forum. Contract award orperformance is suspended during the protest to the same extent, and withinthe same time periods, as if filed at the GAO. The AMC protest decision goalis to resolve protests within 20 working days from filing. To be timely,protests must be filed within the periods specified in FAR 33.10. If youwant to file a protest under the AMC-Level Protest Program, the protest mustrequest resolution under that program and be sent to the address below. Allother agency-level protests should be sent to the contracting officer forresolution. The address for filing a protest directly with AMC is: Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or e-mail: usarmy.redstone.usamc.mbx.protests@mail.mil. Packages sent Federal Express or UPS should be addressed to: HQ Army Material CommandOffice of Command Counsel 9301 Chapek Rd, Rm 2-1SE3401 Ft Belvoir, VA22060-5527. The AMC-Level Protest procedures are found at:http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is notavailable, contact the HQ, AMC to obtain the AMC-Level Protest procedures. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-2, Evaluation- Commercial Items; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The Contractor shall NOT make partial line item shipments against any resulting purchase order/contract issued as a result of this solicitation; e.g., if a line item on the contract reads - Computer, 10 each, the contractor shall NOT ship 3 computers on one shipment and 7 computers on a second shipment. Failure to adhere to this requirement will result in invoices being rejected in WAWF and/or a delay in payment for non-conforming shipped quantities. Company must be registered on System for Award Management(SAM) prior to receipt of quote in order to receive an award. Offeror arereminded that failure to comply shall render their quote asnon-responsive. If company is not registered in SAM, they may do so bygoing to SAM web site at www.sam.gov. Proposed responders must submit any questions concerning this solicitation before (date), (time), to reasonably expect a response from the Government. Those questions not received within the prescribed date will not be considered. New equipment ONLY, NO remanufactured products FOB Destination CONUS (CONtinental U.S.) Bid MUST be good for 90 days, after submission. No partial bids will be accepted.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9e0b368b4a6546a5885fc4d414f63deb/view)
- Place of Performance
- Address: Special Shipping Instructions.
- Record
- SN06885209-F 20231116/231114230059 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |