SOURCES SOUGHT
58 -- Request For Information (RFI) for ISR Sensors in Support of High-Speed Aerial Platforms
- Notice Date
- 11/21/2023 8:57:10 AM
- Notice Type
- Sources Sought
- NAICS
- 334511
— Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Contracting Office
- FA8691 AFLCMC WINK SENSORS WPAFB OH 45433-7101 USA
- ZIP Code
- 45433-7101
- Solicitation Number
- FA8691_HSMMP_RFI
- Response Due
- 12/18/2023 12:00:00 PM
- Archive Date
- 01/02/2024
- Point of Contact
- Denyse Stevens, Phone: 937-422-1967, Donald Tillotson
- E-Mail Address
-
denyse.stevens@us.af.mil, donald.tillotson.2@us.af.mil
(denyse.stevens@us.af.mil, donald.tillotson.2@us.af.mil)
- Description
- DISCLAIMER: This is not a formal solicitation for proposal or proposal abstracts but rather a method by which to accomplish market research. Nothing provided in response to the below topics/areas of interest should be construed as a promise of future funded efforts. Participation is strictly voluntary, and the United States Air Force (USAF) will not provide reimbursement for any costs incurred due to participation. Nothing shared as a response to the below topics should be construed as a guarantee of future work or as direction to modify an existing contract. Only an authorized contracting officer acting within scope of authority may bind the Government. Please be advised that information provided in response to the topics below are not private and should not contain proprietary information. Information received in response to areas of interest may be made publicly available and should thus not contain trade secrets, classified information, or be proprietary in nature. Request for Information (RFI), in accordance with Federal Acquisition Regulation (FAR) 15.201(e) to identify potential sources that can provide military specification ISR sensor capability and fielding of the sensor system in near space, extreme weather, and austere environments. The United States Air Force Intelligence, Surveillance, Reconnaissance And Special�Operations Forces (ISR & SOF) directorate, is seeking information on potential concepts and ideas for: PROGRAM OBJECTIVE:� 1) ISR sensors to support high altitude, high-speed aerial platforms capable of sustained flight for short to long periods within designated operational airspace above 60,000 feet Mean Sea Level (MSL) that could participate in Air Force or joint exercises or demonstrations and test events in the Fiscal Year (FY) 2024 to FY2029 time frame. 2) The contractor(s) should install and integrate required A-ISR sensor(s). UNCLASSIFIED�RESPONSES REQUESTED: The USG is interested in receiving meaningful feedback on stratospheric to exospheric, high-altitude sensors that meet the proposed requirements along with the information requested below. Interested sources that possess the technical capability and resources to fulfill the Government�s requirements stated herein are invited to provide a Capability Statement providing details describing the platform�s characteristics. Key capabilities and attributes: 1. All Sensor Capabilities: � � � �a.� All Sensors should have the capability to be operational at very high speeds.� � � � �b.� All Sensors should be digital uncooled or cooled capable of withstanding extreme� � � � � � � weather conditions under austere environments. � � � �c.� All Sensors should be low power and have the ability to be loaded with and� � � � � � �maintain mission/target profiles. � � � �d.� All Sensors must be capable of being networked and interfacing with current DoD � � � � � �Data transmission/data transfer systems (Datalinks including Line Of Sight (LOS)� � � � � � �and Beyond Line Of Site (BLOS)). Data transmission of all collected data over the � � � � � �interfaced data transmission paths. � � � �e.� All Sensors should be able to be uploaded with mission parameters via ether direct � � � � � �connected, pre-mission means or via in flight data link means. � � � �f.� All Sensors should require minimal maintenance requirements associated with� � � � � � �preventive maintenance checks & services (PMCS); for example: plug and play for� � � � � � �extended period of time without shut down or being taken off required task and also � � � � � �to be associated with long term storage. 2. GEOINT Sensor: � � � �a.� Sensor�s Mid-Wave Infrared (MWIR) Zoom (Cool) resolution must be 640 by 512 � � � � � � or higher. Cooler Hours to MTBF (Mean Time Between Failure) 30,000 hrs.� � � � � � � Digital Zoom 8x or higher. � � � �b.� Sensor�s Long-Wave Infrared (LWIR) Zoom (Uncooled) resolution must be 1280 by� � � � � � � 1024 or higher. Digital Zoom 8x or higher. � � � �c.� Sensor should have a Laser Ranger Finder (LRF) capability to differentiate targets� � � � � � � through inclement weather conditions or low visibility. 3.� SIGINT Sensor: � � � �a.� Sensor should be able to detect and capture multiple channels (not less than 8) of� � � � � � � ELINT/COMIT target data (specific frequency bands will need to be covered in a� � � � � � � classified supplement). � � � � � � � � �i. Mission collection requirements shall be uploaded preflight and/or modified � � � � � � � � � during the flight profile. � � � � � � � � ii. Geolocation Processing: � � � � � � � � � � � � �1. Use Signal detection output and Raw IQ data to produce a Line of� � � � � � � � � � � � � � � �Bearing to the emitter. � � � �b.� Sensor should be able to collect information from multiple targets located on � � � � � � multiple axis of the air Platform travel. Sensor Performance � � � �a. Flight speed (min/max/ideal cruise) (Covered in Classified Supplement) � � � �b. Altitude (min/max/ideal cruise) � � � �c. Lat-Long operational capability/restrictions � � � �d. Endurance/solar cycle capability (max/ideal) � � � �e. Continuous and instantaneous power available for payloads � � � �f. Takeoff/Landing Limitations (max winds, humidity, temperature, etc) � � � �g. Any unique performance parameters or capabilities Sensor Capabilities: � � � �a. Dimensions, volume, and weight limit for payloads � � � �b. Payload mounting type and location(s) � � � �c. External hard points and/or antenna mounting � � � �d. Data backhaul � � � �e. Command and Control (C2) method and flight termination Operational Support Requirements: � � � �a. Launch and recovery site � � � �b. Facility, to include Depot maintenance � � � �c. Personnel � � � �d. Ground support equipment � � � �e. Transportability � � � �f. Recovery Other: � � � �a. Current technology readiness level with substantiation � � � �b. Current and future availability to support demonstration and experimentation � � � �c. Current�contracting relationships with foreign entities/governments or other� � � � � � �restrictions to working with the U.S. DoD � � � �d. Additional capabilities, payloads, or sensors available 4. Submissions should be sent to Denyse Stevens at denyse.stevens@us.af.mil. � 5. Questions are due by 4 December 2023 at 1500 EST. 6. Submissions are due by 18 DEC 2023 at 1500 EST.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/c933c0ff03934984b9ad1c6ab497604d/view)
- Place of Performance
- Address: Wright Patterson AFB, OH, USA
- Country: USA
- Country: USA
- Record
- SN06892167-F 20231123/231121230052 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |