Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF DECEMBER 14, 2023 SAM #8052
SOLICITATION NOTICE

32 -- One (1) Sliding Table Saw - Format-4 Kappa 450 with Preventive Contact System (PCS) safety system

Notice Date

12/12/2023 12:26:17 PM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

333243 — Sawmill, Woodworking, and Paper Machinery Manufacturing
 

Contracting Office

W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
 

ZIP Code

20783-1197
 

Solicitation Number

W911QX24Q0030
 

Response Due

12/19/2023 2:00:00 PM
 

Archive Date

01/03/2024
 

Point of Contact

Andrew S. Nickell
 

E-Mail Address

andrew.s.nickell2.ctr@army.mil
(andrew.s.nickell2.ctr@army.mil)
 

Description

Qty one (1) Sliding Table Saw - Format-4 Kappa 450 with Preventive Contact System (PCS) safety system. The Government requires one (1) Sliding Table Saw in accordance with the following specifications: Shall have a large cutting height of up to 155 millimeters at 90 degree and 109 millimeters at 45 degrees Shall have a saw blade diameter of 250-450 millimeters Shall have a saw blade tilt of 0 degree to 45 degrees Shall have non-contact triggering safety device that protects the operator form being injured by the blade and does not damage the blade if activated. Shall have a guiding system with a cutting length of 2500 millimeters Shall have a rip capacity of 800 millimeters Shall have a telescopic crosscut fence �to perform cross cuts up to 3200 millimeters Shall have a crosscut fence that can move from 90 degrees to 45 degrees and has two (2) fence stops as standard Shall have a fixed reference position provided at 90 degrees Shall have a scoring unit Shall have a rise and fall of the scoring blade that is automatic Shall have a max saw blade diameter without the scoring blade of 450 millimeters Shall have a sliding table cutting length of 3200 millimeters with edging shoe Shall have three (3) tungsten carbide tip fine sizing saw blades with the following dimensions; overall diameter of 350 millimeters, tungsten tooth width of 3.5 millimeters, blade thickness of 2.5 millimeters bore diameter of 30 millimeters Shall have one (1) tungsten carbide tip flat-trapezoidal tooth saw blade with the following dimensions; overall diameter of 350 millimeters, tungsten tooth width of 3.5 millimeters, blade thickness of 2.5 millimeters, bore diameter of 30 millimeters Shall have one (1) adjustable tungsten carbide tip scoring saw blade with the following dimensions; overall diameter of 120 millimeters Shall include delivery Shall include installation Shall include set up and training for shop employees Shall include training for Shop employees Shall include freight, shipping and handling to Aberdeen Proving Ground Shall include 1-year warranty
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/8516c27e76334703affaca6835d5ae5f/view)
 

Place of Performance

Address: Aberdeen Proving Ground, MD 21005, USA

Zip Code: 21005

Country: USA
 

Record

SN06910004-F 20231214/231212230045 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |