SOLICITATION NOTICE
96 -- Steel Buy
- Notice Date
- 1/3/2024 1:41:10 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 331110
— Iron and Steel Mills and Ferroalloy Manufacturing
- Contracting Office
- W07V ENDIST ST PAUL SAINT PAUL MN 55101-1323 USA
- ZIP Code
- 55101-1323
- Solicitation Number
- W912ES24Q0017
- Response Due
- 1/8/2024 7:00:00 AM
- Archive Date
- 01/23/2024
- Point of Contact
- Karl Just, Phone: 6512905768, Jesse Onkka, Phone: 6512905444
- E-Mail Address
-
karl.p.just@usace.army.mil, Jesse.L.Onkka@usace.army.mil
(karl.p.just@usace.army.mil, Jesse.L.Onkka@usace.army.mil)
- Description
- Corps of Engineers Service Base in Pleasant Valley, IA. The intended use is for the fabrication of miter gate anchorage components. In addition, steel plate, bars and angles should be provided by the contractor in the quantities shown in the Appendix below. This material will be used in the fabrication of eighteen single-point picks for removal of our existing miter gates at LD�s 3, 4, 5 and 6, and for modification to a dewater box. The Contractor will provide steel in the quantities below. Schedule of Steel (Appendix) CLIN Description Dimensions Qty Unit 0001 ASTM A709 HPS 100W Plate 4� x 6�8� x 8� 6 ea 0002 ASTM A-572 G50 Plate 1.25� x 96� x 144� 4 ea 0003 ASTM A-36 Flat Bar .75� x 8� x 24� 4 ea 0004 ASTM A-36 Angle .75 x 8� x 6� x 24� 4 ea 0005 ASTM A-36 W12 x 79 Beam 12.4� x 12.1� x 24� 4 ea 0006 ASTM A572/A992 W8 x 40 Beam 8.25� x 8.11 x .360 x 10� 1 ea 0007 ASTM A-36 Angle .375� x 6� x 6� x 12� 1 ea 0008 ASTM A-500 Square Tube 3� x 3� x .25� x 12� 1 ea 0009 ASTM G50 Plate .375� x 48� x 120� 1 ea 1.1 ASTM A709 HPS 100W Plate Specifications. a) A 4� x 4� sample of steel to be cut from any of the four corners of each piece is acceptable to conduct testing. b) Per ASTM A709 Paragraph 4.1 and 4.2, �W� denotes the requirement for impact testing of the material, where �W� denotes that the material will be used for fracture critical, tension components (See Paragraph 10.2 Referring then to Table 10). c) Minimum tensile strength of 110-130 ksi (760-895 MPa) d) Charpy V-Notch impact toughness minimum of 35 ft lbs @ -30 F (48J @ -34C) (all zones) e) Grain direction running parallel to the 6�8� edge. f) Must conform to Buy American Act. g) Final product shall be clean and free of any oil or grease, dross, slag or burrs. All cut edges (regardless of method) shall have a surface roughness acceptable for welding. h) Final product shall be legibly marked with the applicable designation, grade, heat number, size and thickness, name brand, or trademark of the manufacturer for identification and shipment.�Bundle and band the steel material as required for shipping, with cribbing at minimum six inches above the base of the shipping platform to allow offloading with a forklift and/or crane. Covering of the material during shipment is not required. 1.2 (CLIN 0003) ASTM A-36 Flat Bar size .75� x 8� x 24� Quantity 4 a) Will also accept quantity 5 - twenty-foot (20�) lengths. If quoting five (5) twenty-foot (20�) lengths rather than four (4) twenty-four-foot (24�) lengths the quote shall clearly identify the alternate proposal. Quotes will be evaluated based on lowest price with no preference given for the additional net material provide if quoting five (5) twenty-foot (20�) lengths. 2. Submittals For the ASTM A709 HPS 100W steel plate, the Contractor shall submit a mill certification electronically in pdf format via email to both the Government Contracting Officer�s representative and the Government technical point of contact. The Government technical point of contact is: Available at award. 3. Delivery Schedule Delivery of the CLIN 0001 ASTM A709 HPS 100W shall be no later than May 1st, 2024. Soonest possible delivery is requested if possible. Delivery of CLIN 0002-0009 shall deliver no later than January 31, 2024. Soonest possible delivery is requested if possible. All material shall be delivered to the following address during business hours of 07:00 to 15:00, Monday through Thursday, excluding federal holidays. Please give the POC listed below 24 hours advance notice. US Army Corps of Engineers MRPO-Service Base 25549, 182nd St. Pleasant Valley, IA, 52767 POC: Available at award.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/2495b94632dc46e7a55dd822df8f6e96/view)
- Place of Performance
- Address: Pleasant Valley, IA 52767, USA
- Zip Code: 52767
- Country: USA
- Zip Code: 52767
- Record
- SN06926105-F 20240105/240103230046 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |