SPECIAL NOTICE
99 -- TECHNOLOGY/BUSINESS OPPORTUNITY Optimizing the additive manufacturing process of solid silica glass structures
- Notice Date
- 1/11/2024 4:03:54 PM
- Notice Type
- Special Notice
- NAICS
- 32721
—
- Contracting Office
- LLNS � DOE CONTRACTOR Livermore CA 94551 USA
- ZIP Code
- 94551
- Solicitation Number
- IL-13082Plus
- Response Due
- 2/11/2024 5:00:00 PM
- Archive Date
- 02/26/2024
- Point of Contact
- Jared Lynch, Phone: 9254226667, Charlotte Eng, Phone: 9254221905
- E-Mail Address
-
lynch36@llnl.gov, eng23@llnl.gov
(lynch36@llnl.gov, eng23@llnl.gov)
- Description
- Opportunity: Lawrence Livermore National Laboratory (LLNL), operated by the Lawrence Livermore National Security (LLNS), LLC under contract no. DE-AC52-07NA27344 (Contract 44) with the U.S. Department of Energy (DOE), is offering the opportunity to enter into a collaboration to further develop and commercialize its fabrication of glass components using additive manufacturing. Background: Printed glass is of interest in many applications, including optics, decorative pieces, microfluidics, packaging, and more. The current state of the art in additive manufacturing of glass includes techniques such as DLP, SLA, and VAM which use resins made with photopolymer formulations for fabricating silica parts. Broadly speaking, in these processes, parts are fabricated by exposing a photopolymer glass resin to UV light, where the liquid glass resin turns from a liquid to a solid upon exposure to UV light. After printing, excess resin is removed and then undergoes a thermal treatment, wherein the more volatile organic components are removed by drying at a lower temperature, followed by a pyrolysis step where organic binder material is removed through pyrolysis, and finally followed by sintering of glass particles to create a dense glass part.� While some of the glass parts produced with photopolymer additive manufacturing techniques have various dimensions spanning over a centimeter, most of the parts do not have thicknesses greater than a few millimeters.� The processing of the as-printed part through drying, debinding, and sintering can however cause a large amount of shrinkage in the part, sometimes as large as 50% or more, which may be difficult to account for with relatively larger sized parts (greater than 5 mm). ��Another challenge with conventional glass processing methods is creating glass parts (e.g., optical components) that have a gradient composition.� LLNL researchers have developed methods to address these challenges. Description: LLNL researchers have developed a custom resin formulation which uses a dispersing solvent and only a multifunctional monomer as the binding agent. The dispersing solvent system typically used has multiple components meant to achieve excellent dispersal of silica in order to create a flowable resin (rather than a paste). The dispersing agent has low vapor pressure, which allows the 3D printed glass part to dry at a slower, more controlled rate versus higher vapor pressure solvents that, through rapid evaporation, can cause damage to the part. The dispersing agent�s refractive index can be tuned to match that of the silica resulting in optical transparent final structures. Additionally, LLNL researchers have developed a method for fabricating glass components with custom material composition profiles in 1-, 2-, or 3-dimensions. �In this method, Direct Ink Writing (DIW) additive manufacturing technique is used to print filaments of a rheologically-tuned ink�pastes containing a glass forming species--into a loosely bound, amorphous, low density form (LDF), analogous to a green body in ceramics. DIW inks of different compositions may be blended inline at the print nozzle to achieve the desired material composition at the desired location within the LDF. Once the LDF (e.g. monolith, film, or freeform) has been completely formed, the part is dried to remove residual organics and heat treated to form a transparent glass. The resultant glass part retains the compositional variation that was imparted during printing, and it can be further processed to achieve the desired surface figure, surface flatness, or surface quality via grinding and polishing. Advantages/Benefits:� >5 mm dimensions of 3D printed parts. The formation of optical or non-optical glass with custom composition profiles that are not achievable by conventional glass processing techniques. Ability to match refractive index using different dispersing agent mixtures. Capable of use with SLA, DLP, VAM, and DIW additive manufacturing techniques. Livermore�s DIW-printed invention also enables: The formation of optical or non-optical glass with custom composition profiles that are not achievable by conventional glass processing techniques. The introduction of species that cannot be introduced easily by diffusion methods. The creation of glass optics containing custom patterned material properties that are far larger than those achievable by diffusion methods. Potential Applications:� Optical (active or passive) components such as lenses, fiber optic cables, glass sensors, non-optical glass accessories as well as functionally graded glass structures.� For DIW fabricated gradient composition glass, ions, molecules, or particles can be introduced in arbitrary (i.e. custom) locations within the glass components (monoliths, films, or free forms) to achieve spatially varying material properties within the glass. Development Status:� Current stage of technology development:� TRL 3 LLNL has filed for patent protection on this invention. LLNL is seeking industry partners with a demonstrated ability to bring such inventions to the market. Moving critical technology beyond the Laboratory to the commercial world helps our licensees gain a competitive edge in the marketplace. All licensing activities are conducted under policies relating to the strict nondisclosure of company proprietary information.� Please visit the IPO website at https://ipo.llnl.gov/resources for more information on working with LLNL and the industrial partnering and technology transfer process. Note:� THIS IS NOT A PROCUREMENT.� Companies interested in commercializing LLNL's Optimized photopolymer resin formulation for fabrication of solid silica glass structures with feature sizes greater than 5mm should provide an electronic OR written statement of interest, which includes the following: Company Name and address. The name, address, and telephone number of a point of contact. A description of corporate expertise and/or facilities relevant to commercializing this technology. Please provide a complete electronic OR written statement to ensure consideration of your interest in LLNL's Optimized photopolymer resin formulation for fabrication of solid silica glass structures with feature sizes greater than 5mm. The subject heading in an email response should include the Notice ID and/or the title of LLNL�s Technology/Business Opportunity and directed to the Primary and Secondary Point of Contacts listed below. Written responses should be directed to: Lawrence Livermore National Laboratory Innovation and Partnerships Office P.O. Box 808, L-779 Livermore, CA� 94551-0808 Attention:�� IL-13082Plus
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/f52558e857d8495980a88171bdbc3102/view)
- Place of Performance
- Address: Livermore, CA, USA
- Country: USA
- Country: USA
- Record
- SN06933114-F 20240113/240111230050 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |