Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JANUARY 14, 2024 SAM #8083
SOLICITATION NOTICE

78 -- TARGET BACKERS

Notice Date

1/12/2024 11:31:07 AM
 

Notice Type

Solicitation
 

NAICS

339920 — Sporting and Athletic Goods Manufacturing
 

Contracting Office

FLETC GLYNCO PROCUREMENT OFFICE Brunswick GA 31524 USA
 

ZIP Code

31524
 

Solicitation Number

24FAD0006PR_Sol_70LGLY24QGLB00010
 

Response Due

1/17/2024 3:00:00 PM
 

Archive Date

02/01/2024
 

Point of Contact

HOZAEL MORGAN, Phone: (912) 267-2018, KIMBERLY CAVANAUGH, Phone: (912) 230-5327
 

E-Mail Address

Hozael.Morgan@fletc.dhs.gov, kimberly.d.cavanaugh@fletc.dhs.gov
(Hozael.Morgan@fletc.dhs.gov, kimberly.d.cavanaugh@fletc.dhs.gov)
 

Description

CARDBOARD TARGET BACKERS SPECIFICATIONS Cardboard size-14.5"" x 45"" Cardboard is ECT (Edge Crush Test), 44 C flute (means edge crush test, a measurement used in the industry to gauge the strength of cardboard).� The cardboard should measure approximately .168 thousands of an inch, in thickness. Liner combination 55/26/55, Mics at .168 The cardboard should be �stock� in color (the brown/buff color, of standard cardboard). The grain of the cardboard should be vertical cut (means the inside � wafered � porting of the cardboard, should be running lengthwise of the cardboard sheet). The corners of the cardboard sheet should be sharp/exactly squared (corners should not be rounded). The outside face of the cardboard sheet (both front and back), shall have a polished/smooth texture. The inside porting of the cardboard sheet should have a continuous sheet of corrugated cardboard/paper. When cardboard is shipped on a pallet, the tops of the cardboard pallets may have protective cover pieces of cardboard, covering the lower stacked cardboard; a top liner of cardboard/under the straps/bands that secure it to the pallet.� Each pallet of cardboard should be secured with at least two pieces of banding � either metal or plastic, with attachment clips fastening the bands. A single pallet will contain no more than 750 cardboard sheets and pallets will not be double stacked. Two sides of the pallet should have an 8 ��x11� piece of paper attached (with the Size, Manufacturers name/address/date � and number of pieces contained). An estimate of the quantity required is provided on the solicitation.� Bidders must indicate the industry standard quantity to be delivered with quote. Delivery schedules, if any, must be adhered to as closely as possible; early deliveries will not be accepted unless approved in advance. Cardboard size-24.5"" x 45"" Cardboard is ECT (Edge Crush Test), 44 C flute The cardboard should measure approximately .168 thousands of an inch, in thickness. Liner combination 55/26/55, Mics at .168 The cardboard should be �stock� in color (the brown/buff color, of standard cardboard). The grain of the cardboard should be vertical cut (means the inside � wafered � porting of the cardboard, should be running lengthwise of the cardboard sheet). The corners of the cardboard sheet should be sharp/exactly squared (corners should not be rounded). The outside face of the cardboard sheet (both front and back), shall have a polished/smooth texture. The inside porting of the cardboard sheet should have a continuous sheet of corrugated cardboard/paper. When cardboard is shipped on a pallet, the tops of the cardboard pallets may have protective cover pieces of cardboard, covering the lower stacked cardboard; a top liner of cardboard/under the straps/bands that secure it to the pallet.� Each pallet of cardboard should be secured with at least two pieces of banding � either metal or plastic, with attachment clips fastening the bands. A single pallet will contain no more than 500 cardboard sheets and pallets will not be double stacked. Two sides of the pallet should have an 8 ��x11� piece of paper attached (with the Size, Manufacturers name/address/date � and number of pieces contained). An estimate of the quantity required is provided on the solicitation.� Bidders must indicate the industry standard quantity to be delivered with quote. Delivery schedules, if any, must be adhered to as closely as possible; early deliveries will not be accepted unless approved in advance.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/4539aef1a5de4c6aa7d27ed067fd9b35/view)
 

Place of Performance

Address: Brunswick, GA 31524, USA

Zip Code: 31524

Country: USA
 

Record

SN06934949-F 20240114/240112230040 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |