Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JANUARY 24, 2024 SAM #8093
SOURCES SOUGHT

24 -- 695-24-1-6969-0005 Skid Steer Loader

Notice Date

1/22/2024 12:16:34 PM
 

Notice Type

Sources Sought
 

NAICS

333120 — Construction Machinery Manufacturing
 

Contracting Office

252-NETWORK CONTRACT OFFICE 12 (36C252) MILWAUKEE WI 53214 USA
 

ZIP Code

53214
 

Solicitation Number

36C25224Q0213
 

Response Due

1/22/2024 1:00:00 PM
 

Archive Date

02/21/2024
 

Point of Contact

Waymon McNeal, Contract Specialist, Phone: waymon.mcnealjr@va.gov
 

E-Mail Address

waymon.mcnealjr@va.gov
(waymon.mcnealjr@va.gov)
 

Awardee

null
 

Description

THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR QUOTE.   The NCO 12, Great Lakes Acquisition Center, 115 S. 84th Street, Suite 101, Milwaukee, WI 53214, is performing market research to determine if there is a sufficient number of qualified: (1) Service-Disabled Veteran Owned Small Business (SDVOSB); (2) Veteran Owned Small Business (VOSB); or (3) Small or emerging small business firms, or (4) Other Than Small business firms, to provide a General Specifications Skid Steer Loader to the Clement J. Zablocki VA Medical Center Milwaukee, WI 53295-0001.   General Requirements: Skid Steer Loader must meet the below requirements: Must be a turbocharged 4-cylinder diesel powered Skid Steer Loader Must be Tier 4 Must have maximum: Operating weight of 7,900 pounds System relief pressure of 3045 Must have minimum: 207 cubic inch displacement engine. torque rating of 232 LB ft. 68 net horsepower 25-gallon fuel tank Height to hinge pin of 129 inches. Height with loader arms at maximum height of 103 inches Reach with bucket at full height of 31.9 inches. Wheelbase of 52 inches Tipping load capacity of 5,600 pounds Operating load of 2,800 pounds 24.5 GPM at rated engine speed Must have dual lift cylinders. Must have dual bucket cylinders. Must have vertical lift. Must have a hydrostatic drive power train. Must have hydrostatic pumps that are directly driven off the engine flywheel. Must have hydrostatic pumps with two variable displacement piston pumps. Must have standard two speed drive. Must have heavy duty chain case with two heavy duty 100HD drive chains for each chain case. Must have separate lubrication system for each chain case. Must have externally adjustable final drive chains. Must have gear type pump hydraulic system. Must have high flow auxiliary hydraulic with minimum 37.6 GPM at rated engine speed. Must have fully functional auxiliary hydraulic system with ISO flat face hydraulic quick couplers that supply. hydraulic oil flow to attachments Must have standard 14 pin connector for auxiliary attachment multifunction control. Must have 12w-volt electrical system with minimum 120-amp alternator. Must have single 1000 CCA maintenance free battery with master disconnect switch and jumper posts. Must have air suspension seat. Must have completely sealed cab with HVAC. Must come with standard and demo front door. Must have hand and foot controls. Must have lap bar. Must have keyless start with anti-theft lockout. Must have backlit controls. Must have reverse camera. Must have rear view mirror. Must have LCD Function display which will have maintenance tracking and fault code display with descriptions. Must have blue tooth radio with speakers. Must have back up alarm Must have lockable service engine hood. Must have operator compartment floor cleanout. Must have forward tilting cab for component access. Must have engine start lock-out if operator is not seated. Must have automatic boom and bucket control lock-out if operator leaves seat. Must have horn. Must have block heater. Must have boom safety stop applied manually from inside cab. Must have one-way self-leveling and ride control. Must have 12x16.5 severe duty tires. Must have FOPS level 2. Must have hose attachment guide. Must have four corner LED strobes. Must have rust proof protection spray. Must come with Operator training, delivery to VA Milwaukee, WI Grounds building 107. Must include freight charges and dealer prep. Must come with Maintenance and service manual, paper, and disc. All interested firms who can meet the requirements stated above should respond, in writing, INCLUDING ALL THE FOLLOWING: Company name. Address. Point of contact (name/title/telephone number/e-mail address). FSS / SEWP Contract number, if applicable. UIE number. Tax ID number. Indication of which business category (SDVOSB, VOSB, Small Business or Other Than Small Business) for which the organization qualifies. A capability statement that addresses the organizations qualifications and ability to provide the requirement depicted above. Documentation from manufacturer (i.e. correspondence from manufacturer) of your firm being an authorized distributor for the manufacturer.   852.219-76  VA Notice of Limitations on Subcontracting Certificate of Compliance for Supplies and Products. As prescribed in 819.7011(c), insert the following clause. The contracting officer shall tailor the clause in paragraph (a)(2)(iii) as appropriate: VA NOTICE OF LIMITATIONS ON SUBCONTRACTING CERTIFICATE OF COMPLIANCE FOR SUPPLIES AND PRODUCTS (JAN 2023) (DEVIATION) (a) Pursuant to 38 U.S.C. 8127(l)(2), the offeror certifies that (1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows: [Offeror check the appropriate box] (i) [ ] In the case of a contract for supplies or products (other than from a non-manufacturer of such supplies), it will not pay more than 50% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219-74. Any work that a similarly situated certified SDBOSB/VOSB subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (ii) [ ] In the case of a contract for supplies from a nonmanufacturer, it will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) is granted. The offeror understands that, as provided in 13 CFR 121.406(b)(7), such a waiver has no effect on requirements external to the Small Business Act, such as the Buy American Act or the Trade Agreements Act. (2) Manufacturer or nonmanufacturer representation and certification. [Offeror fill-in check each applicable box below. The offeror must select the applicable provision below, identifying itself as either a manufacturer or nonmanufacturer]: (i) [ ] Manufacturer or producer. The offeror certifies that it is the manufacturer or producer of the end item being procured, and the end item is manufactured or produced in the United States, in accordance with paragraph (a)(1)(i). (ii) [ ] Nonmanufacturer. The offeror certifies that it qualifies as a nonmanufacturer in accordance with the requirements of 13 CFR 121.406(b) and paragraph (a)(1)(ii). The offeror further certifies it meets each element below as required in order to qualify as a nonmanufacturer. [Offeror fill-in check each box below.] [ ] The offeror certifies that it does not exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS code 541519, which is found at 13 CFR 121.201, footnote 18). [ ] The offeror certifies that it is primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied. [ ] The offeror certifies that it will take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice. (iii) [ ] The offeror certifies that it will supply the end item of a small business manufacturer, processor, or producer made in the United States, unless a waiver as provided in 13 CFR 121.406(b)(5) has been issued by SBA. [Contracting Officer fill-in or removal (see 13 CFR 121.1205). This requirement must be included for a single end item. However, if SBA has issued an applicable waiver of the nonmanufacturer rule for the end item, this requirement must be removed in the final solicitation or contract.] or [Contracting officer tailor clause to remove one or other block under subparagraph (iii).] [ ] If this is a multiple item acquisition, the offeror certifies that at least 50% of the estimated contract value is composed of items that are manufactured by small business concerns. [Contracting Officer fill-in or removal. See 13 CFR 121.406(d) for multiple end items. If SBA has issued an applicable nonmanufacturer rule waiver, this requirement must be removed in the final solicitation or contract.] (3) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution. (4) If VA determines that an SDVOSB/VOSB awarded a contract pursuant to 38 U.S.C. 8127 did not act in good faith, such SDVOSB/VOSB shall be subject to any or all of the following: (i) Referral to the VA Suspension and Debarment Committee; (ii) A fine under section 16(g)(1) of the Small Business Act (15 U.S.C. 645(g)(1)); and (iii) Prosecution for violating 18 U.S.C. 1001. (b) The offeror represents and understands that by submission of its offer and award of a contract it may be required to provide copies of documents or records to VA that VA may review to determine whether the offeror complied with the limitations on subcontracting requirement specified in the contract or to determine whether the offeror qualifies as a manufacturer or nonmanufacturer in compliance with the limitations on subcontracting requirement. Contracting officers may, at their discretion, require the contractor to demonstrate its compliance with the limitations on subcontracting at any time during performance and upon completion of a contract if the information regarding such compliance is not already available to the contracting officer. Evidence of compliance includes, but is not limited to, invoices, copies of subcontracts, or a list of the value of tasks performed. (c) The offeror further agrees to cooperate fully and make available any documents or records as may be required to enable VA to determine compliance. The offeror understands that failure to provide documents as requested by VA may result in remedial action as the Government deems appropriate. (d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror s bid, quotation, or proposal. The Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award. Certification: I hereby certify that if awarded the contract, [insert name of offeror] will comply with the limitations on subcontracting specified in this clause and in the resultant contract. I further certify that I am authorized to execute this certification on behalf of [insert name of offeror]. Printed Name of Signee: ________________________________________ Printed Title of Signee: _________________________________________ Signature: ___________________________________________________ Date: _____________________ Company Name and Address: ______________________________________ ________________________________________________________________ (End of clause) Submit responses to the Contracting Specialist, Waymon McNeal, at Waymon.McNealjr@va.gov no later than 3:00 PM (Central Standard Time), 25 January 2024.   36C25224Q0213 Skid Steer Loader shall be referenced on all correspondence regarding this announcement.     TELEPHONIC INQUIRIES WILL NOT BE ACCEPTED.   The NAICS Code 333120 - Construction Machinery Manufacturing, is applicable to this acquisition; the size standard is 1250 employees. Interested firms are reminded that in accordance with FAR 4.12, prospective contractors shall complete electronic annual representations and certifications in conjunction with FAR 4.11 required registration in the Systems for Award Management (SAM) database prior to award of a contract. The Government will use responses to this notice to make an appropriate acquisition decision. This is the only notice; no other copies of this notice will be provided.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/07ce6a39d6824e66807202f33cd2afef/view)
 

Place of Performance

Address: 5000 W National Ave, Milwaukee, WI 53295-0001, USA

Zip Code: 53295-0001

Country: USA
 

Record

SN06941842-F 20240124/240122230046 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |