SOLICITATION NOTICE
48 -- VALVE,BALL
- Notice Date
- 2/14/2024 1:02:50 AM
- Notice Type
- Solicitation
- NAICS
- 332919
— Other Metal Valve and Pipe Fitting Manufacturing
- Contracting Office
- NAVSUP WEAPON SYSTEMS SUPPORT MECH MECHANICSBURG PA 17050-0788 USA
- ZIP Code
- 17050-0788
- Solicitation Number
- N0010424QFB78
- Response Due
- 3/15/2024 1:30:00 PM
- Archive Date
- 03/30/2024
- Point of Contact
- Telephone: 7176053229
- E-Mail Address
-
JOEL.CURTIS@NAVY.MIL
(JOEL.CURTIS@NAVY.MIL)
- Description
- CONTACT INFORMATION|4|N743.5|TBD|7176053229|JOEL.J.CURTIS.CIV@US.NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|See specification sections C and E.| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Stand-Alone Receiving Report - Certifications Combo - Receiving Report & Invoice - Material |NA|TBD|N00104|TBD|N39040 - Certifications, S4306A - Material|N50286|TBD|133.2|NA|NA|N39040 - Certifications|NA|NA|SE E DD 1423|PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| EQUAL OPPORTUNITY (SEP 2016)|2||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|One year from date of delivery.|One year from date of delivery.||||| WARRANTY OF DATA--BASIC (MAR 2014)|2||| BUY AMERICAN --FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM - BASIC (NOV2023))|5|||||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2023)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (NOV 2023))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (NOV 2014)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2023)|13|332919|750 EMPLOYEES|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| Data Item A001 (inspection and Test Plan) may be waived if already on file at NAVSUP WSS Mech. 2.Drawings associated with this solicitation will be made available on the new beta.SAM website, but will be restricted access which needs tobe approved. Once access has been requested, interested vendors should email the POC listed on the solicitation to inform them of the request. 3. This is a rated order certified for national defense use,and the Contractor will follow all the requirements ofthe Defense Priorities and Allocations Systemregulation (15 CFR 700). 4. This solicitation isand resultign award will bee issued IAW EAF. 5. This effort may require access to confidential drawings. If access is required a facility clearance (DD254) will be required upon award. The award of this solicitation will not be delayed to facilitate facility clearance. If classified drawings areto be requested, this request must be made within 15 days of closing date of solicitation. Award will not be delayed to facilitate the delivery of classified drawings passed thatdate. \ 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.2.1 Specification Revisions - The specification revisions listed under ""Documents References"" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. 2.2.2 Documents, drawings, and publications supplied are listed under ""Drawing Number"". These items should be retained until an award is made. 2.2.3 ""Document References"" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.3 Identification of Classified Documents - This contract/purchase order requires the Contractor to have authorized access to classified documents in accordance with the attached Contract Security Classification Specification (DD Form 254). The classified documents and security level are: ;845-4640418, Confidential; DRAWING DATA=2621-625-03 |96169|AL| |D|0001 |AL|49998|0110011 DRAWING DATA=2621-625-03 |96169|AL| |D|0001.1.1 | R|49998|0105307 DRAWING DATA=2621-625-03 |96169|AL| |D|0002 | F|49998|0087449 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.1 | N|49998|0107282 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.2 | S|49998|0079553 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.3 | V|49998|0078581 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.4 |AC|49998|0088927 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.5 |AK|49998|0088342 DRAWING DATA=2621-625-03 |96169|AL| |D|0002.6 |AL|49998|0027433 DRAWING DATA=2621-625-03 |96169|AL| |D|0003 |AL|49998|0133653 DRAWING DATA=2621-625-03 |96169|AL| |D|0003.1 |AC|49998|0102806 DRAWING DATA=2621-625-03 |96169|AL| |D|0003.2 |AH|49998|0083381 DRAWING DATA=2621-625-03 |96169|AL| |D|0003.3 |AL|49998|0062196 DRAWING DATA=2621-625-03 |96169|AL| |D|0004 | T|49998|0036989 DRAWING DATA=2621-625-03 |96169|AL| |D|0005 |AL|49998|0060702 DRAWING DATA=2621-625-03 |96169|AL| |D|0005.1 |AK|49998|0071041 DRAWING DATA=2621-625-03 |96169|AL| |D|0006 | S|49998|0041574 DRAWING DATA=2621-625-03 |96169|AL| |D|0007 | S|49998|0042477 DRAWING DATA=2621-625-03 |96169|AL| |D|0008 |AJ|49998|0040172 DRAWING DATA=2621-625-03 |96169|AL| |D|0009 | S|49998|0036836 DRAWING DATA=2621-625-03 |96169|AL| |D|0010 | S|49998|0038141 DRAWING DATA=2621-625-03 |96169|AL| |D|0011 | S|49998|0037232 DRAWING DATA=2621-625-03 |96169|AL| |D|0012 | S|49998|0040562 DRAWING DATA=2621-625-03 |96169|AL| |D|0013 | S|49998|0034249 DRAWING DATA=2621-625-03 |96169|AL| |D|0014 | S|49998|0036960 DRAWING DATA=2621-625-03 |96169|AL| |D|0015 |AC|49998|0036326 DRAWING DATA=2621-625-03 |96169|AL| |D|0016 | S|49998|0037485 DRAWING DATA=2621-625-03 |96169|AL| |D|0017 | S|49998|0080682 DRAWING DATA=2621-625-03 |96169|AL| |D|0018 | S|49998|0058706 DRAWING DATA=2621-625-03 |96169|AL| |D|0019 | S|49998|0065643 DRAWING DATA=2621-625-03 |96169|AL| |D|0020 |AC|49998|0065400 DRAWING DATA=2621-625-03 |96169|AL| |D|0021 |AC|49998|0065890 DRAWING DATA=2621-625-03 |96169|AL| |D|0022 | S|49998|0070546 DRAWING DATA=2621-625-03 |96169|AL| |D|0023 | S|49998|0077894 DRAWING DATA=2621-625-03 |96169|AL| |D|0024 |AC|49998|0061529 DRAWING DATA=2621-625-03 |96169|AL| |D|0025 | S|49998|0080991 DRAWING DATA=2621-625-03 |96169|AL| |D|0026 | S|49998|0078169 DRAWING DATA=2621-625-03 |96169|AL| |D|0027 | S|49998|0062079 DRAWING DATA=2621-625-03 |96169|AL| |D|0028 | S|49998|0063911 DRAWING DATA=2621-625-03 |96169|AL| |D|0029 | S|49998|0081357 DRAWING DATA=2621-625-03 |96169|AL| |D|0030 | S|49998|0078268 DRAWING DATA=2621-625-03 |96169|AL| |D|0031 | S|49998|0067988 DRAWING DATA=2621-625-03 |96169|AL| |D|0032 | S|49998|0052338 DRAWING DATA=2621-625-03 |96169|AL| |D|0033 | S|49998|0066347 DRAWING DATA=2621-625-03 |96169|AL| |D|0034 | S|49998|0076897 DRAWING DATA=2621-625-03 |96169|AL| |D|0035 |AC|49998|0117817 DRAWING DATA=2621-625-03 |96169|AL| |D|0036 | S|49998|0070990 DRAWING DATA=2621-625-03 |96169|AL| |D|0037 | S|49998|0075571 DRAWING DATA=2621-625-03 |96169|AL| |D|0038 | S|49998|0069120 DRAWING DATA=2621-625-03 |96169|AL| |D|0039 | S|49998|0075078 DRAWING DATA=2621-625-03 |96169|AL| |D|0040 | S|49998|0100110 DRAWING DATA=2621-625-03 |96169|AL| |D|0041 | S|49998|0097068 DRAWING DATA=2621-625-03 |96169|AL| |D|0042 | S|49998|0077580 DRAWING DATA=2621-625-03 |96169|AL| |D|0043 | S|49998|0071220 DRAWING DATA=2621-625-03 |96169|AL| |D|0044 |AC|49998|0073502 DRAWING DATA=2621-625-03 |96169|AL| |D|0045 | S|49998|0071561 DRAWING DATA=2621-625-03 |96169|AL| |D|0046 |AC|49998|0053564 DRAWING DATA=2621-625-03 |96169|AL| |D|0047 |AC|49998|0088878 DRAWING DATA=2621-625-03 |96169|AL| |D|0048 | S|49998|0080796 DRAWING DATA=2621-625-03 |96169|AL| |D|0049 | Z|49998|0106263 DRAWING DATA=2621-625-03 |96169|AL| |D|0050 | S|49998|0088279 DRAWING DATA=2621-625-03 |96169|AL| |D|0051 | S|49998|0089976 DRAWING DATA=2621-625-03 |96169|AL| |D|0052 | S|49998|0067306 DRAWING DATA=2621-625-03 |96169|AL| |D|0053 | S|49998|0065072 DRAWING DATA=2621-625-03 |96169|AL| |D|0054 | S|49998|0071895 DRAWING DATA=2621-625-03 |96169|AL| |D|0055 | L|49998|0060798 DRAWING DATA=2621-625-03 |96169|AL| |D|0056 | L|49998|0060631 DRAWING DATA=2621-625-03 |96169|AL| |D|0057 |AC|49998|0087017 DRAWING DATA=2621-625-03 |96169|AL| |D|0058 | S|49998|0079014 DRAWING DATA=2621-625-03 |96169|AL| |D|0059 | S|49998|0087182 DRAWING DATA=2621-625-03 |96169|AL| |D|0060 | S|49998|0080044 DRAWING DATA=2621-625-03 |96169|AL| |D|0061 | S|49998|0088606 DRAWING DATA=2621-625-03 |96169|AL| |D|0062 | S|49998|0082165 DRAWING DATA=2621-625-03 |96169|AL| |D|0063 | M|49998|0070993 DRAWING DATA=2621-625-03 |96169|AL| |D|0064 | M|49998|0067453 DRAWING DATA=2621-625-03 |96169|AL| |D|0065 | M|49998|0067192 DRAWING DATA=2621-625-03 |96169|AL| |D|0066 | S|49998|0070847 DRAWING DATA=2621-625-03 |96169|AL| |D|0067 | W|49998|0079068 DRAWING DATA=2621-625-03 |96169|AL| |D|0069 | S|49998|0078860 DRAWING DATA=2621-625-03 |96169|AL| |D|0070 | S|49998|0067697 DRAWING DATA=2621-625-03 |96169|AL| |D|0071 | W|49998|0075516 DRAWING DATA=2621-625-03 |96169|AL| |D|0072 | S|49998|0121919 DRAWING DATA=2621-625-03 |96169|AL| |D|0073 | N|49998|0063130 DRAWING DATA=2621-625-03 |96169|AL| |D|0074 |AC|49998|0088058 DRAWING DATA=2621-625-03 |96169|AL| |D|0075 | S|49998|0091225 DRAWING DATA=2621-625-03 |96169|AL| |D|0076 | S|49998|0084931 DRAWING DATA=2621-625-03 |96169|AL| |D|0077 | S|49998|0080448 DRAWING DATA=2621-625-03 |96169|AL| |D|0078 | S|49998|0088423 DRAWING DATA=2621-625-03 |96169|AL| |D|0079 | S|49998|0097630 DRAWING DATA=2621-625-03 |96169|AL| |D|0080 | S|49998|0102812 DRAWING DATA=2621-625-03 |96169|AL| |D|0081 | S|49998|0089089 DRAWING DATA=2621-625-03 |96169|AL| |D|0082 | S|49998|0091204 DRAWING DATA=2621-625-03 |96169|AL| |D|0083 | S|49998|0093758 DRAWING DATA=2621-625-03 |96169|AL| |D|0084 | S|49998|0074452 DRAWING DATA=2621-625-03 |96169|AL| |D|0085 | S|49998|0101412 DRAWING DATA=2621-625-03 |96169|AL| |D|0086 | S|49998|0124627 DRAWING DATA=2621-625-03 |96169|AL| |D|0087 | S|49998|0089362 DRAWING DATA=2621-625-03 |96169|AL| |D|0088 | S|49998|0125925 DRAWING DATA=2621-625-03 |96169|AL| |D|0089 | T|49998|0138119 DRAWING DATA=2621-625-03 |96169|AL| |D|0090 | S|49998|0172266 DRAWING DATA=2621-625-03 |96169|AL| |D|0091 | S|49998|0087770 DRAWING DATA=2621-625-03 |96169|AL| |D|0092 | S|49998|0082515 DRAWING DATA=2621-625-03 |96169|AL| |D|0093 | S|49998|0083019 DRAWING DATA=2621-625-03 |96169|AL| |D|0094 | S|49998|0082380 DRAWING DATA=2621-625-03 |96169|AL| |D|0095 | S|49998|0086506 DRAWING DATA=2621-625-03 |96169|AL| |D|0096 | S|49998|0125829 DRAWING DATA=2621-625-03 |96169|AL| |D|0097 | S|49998|0108393 DRAWING DATA=2621-625-03 |96169|AL| |D|0098 | T|49998|0065762 DRAWING DATA=2621-625-03 |96169|AL| |D|0100 | T|49998|0070894 DRAWING DATA=2621-625-03 |96169|AL| |D|0101 | T|49998|0071718 DRAWING DATA=2621-625-03 |96169|AL| |D|0102 | T|49998|0071097 DRAWING DATA=2621-625-03 |96169|AL| |D|0103 | T|49998|0090824 DRAWING DATA=2621-625-03 |96169|AL| |D|0104 | T|49998|0090404 DRAWING DATA=2621-625-03 |96169|AL| |D|0105 | T|49998|0076361 DRAWING DATA=2621-625-03 |96169|AL| |D|0106 | U|49998|0082997 DRAWING DATA=2621-625-03 |96169|AL| |D|0107 | U|49998|0091013 DRAWING DATA=2621-625-03 |96169|AL| |D|0108 | T|49998|0137512 DRAWING DATA=2621-625-03 |96169|AL| |D|0109 | U|49998|0086586 DRAWING DATA=2621-625-03 |96169|AL| |D|0110 | V|49998|0136029 DRAWING DATA=2621-625-03 |96169|AL| |D|0111 | V|49998|0123395 DRAWING DATA=2621-625-03 |96169|AL| |D|0112 | V|49998|0072126 DRAWING DATA=2621-625-03 |96169|AL| |D|0113 | V|49998|0071344 DRAWING DATA=2621-625-03 |96169|AL| |D|0114 | V|49998|0069795 DRAWING DATA=2621-625-03 |96169|AL| |D|0115 | V|49998|0073173 DRAWING DATA=2621-625-03 |96169|AL| |D|0117 | V|49998|0071456 DRAWING DATA=2621-625-03 |96169|AL| |D|0118 | V|49998|0077864 DRAWING DATA=2621-625-03 |96169|AL| |D|0119 | V|49998|0073056 DRAWING DATA=2621-625-03 |96169|AL| |D|0120 | V|49998|0094572 DRAWING DATA=2621-625-03 |96169|AL| |D|0121 | V|49998|0076429 DRAWING DATA=2621-625-03 |96169|AL| |D|0122 | V|49998|0109802 DRAWING DATA=2621-625-03 |96169|AL| |D|0123 | V|49998|0072693 DRAWING DATA=2621-625-03 |96169|AL| |D|0124 | V|49998|0060600 DRAWING DATA=2621-625-03 |96169|AL| |D|0125 | W|49998|0063434 DRAWING DATA=2621-625-03 |96169|AL| |D|0126 |AA|49998|0073173 DRAWING DATA=2621-625-03 |96169|AL| |D|0127 | W|49998|0064212 DRAWING DATA=2621-625-03 |96169|AL| |D|0128 | W|49998|0063746 DRAWING DATA=2621-625-03 |96169|AL| |D|0129 | W|49998|0071249 DRAWING DATA=2621-625-03 |96169|AL| |D|0130 | W|49998|0082521 DRAWING DATA=2621-625-03 |96169|AL| |D|0132 | W|49998|0077575 DRAWING DATA=2621-625-03 |96169|AL| |D|0133 | Y|49998|0063434 DRAWING DATA=2621-625-03 |96169|AL| |D|0134 | Y|49998|0078666 DRAWING DATA=2621-625-03 |96169|AL| |D|0135 |AC|49998|0091986 DRAWING DATA=2621-625-03 |96169|AL| |D|0136 | Y|49998|0080972 DRAWING DATA=2621-625-03 |96169|AL| |D|0137 | Y|49998|0082349 DRAWING DATA=2621-625-03 |96169|AL| |D|0138 | Y|49998|0078670 DRAWING DATA=2621-625-03 |96169|AL| |D|0139 | Y|49998|0068212 DRAWING DATA=2621-625-03 |96169|AL| |D|0140 | Y|49998|0062850 DRAWING DATA=2621-625-03 |96169|AL| |D|0141 | Z|49998|0067637 DRAWING DATA=2621-625-03 |96169|AL| |D|0142 | Z|49998|0101793 DRAWING DATA=2621-625-03 |96169|AL| |D|0143 | Z|49998|0102035 DRAWING DATA=2621-625-03 |96169|AL| |D|0144 | Z|49998|0062060 DRAWING DATA=2621-625-03 |96169|AL| |D|0145 |AA|49998|0059438 DRAWING DATA=2621-625-03 |96169|AL| |D|0146 |AA|49998|0064093 DRAWING DATA=2621-625-03 |96169|AL| |D|0147 |AA|49998|0062043 DRAWING DATA=2621-625-03 |96169|AL| |D|0148 |AA|49998|0067228 DRAWING DATA=2621-625-03 |96169|AL| |D|0149 |AB|49998|0075074 DRAWING DATA=2621-625-03 |96169|AL| |D|0150 |AB|49998|0081824 DRAWING DATA=2621-625-03 |96169|AL| |D|0151 |AC|49998|0081539 DRAWING DATA=2621-625-03 |96169|AL| |D|0152 |AB|49998|0066724 DRAWING DATA=2621-625-03 |96169|AL| |D|0153 |AB|49998|0063072 DRAWING DATA=2621-625-03 |96169|AL| |D|0156 |AD|49998|0070574 DRAWING DATA=2621-625-03 |96169|AL| |D|0157 |AE|49998|0077520 DRAWING DATA=2621-625-03 |96169|AL| |D|0158 |AE|49998|0072166 DRAWING DATA=2621-625-03 |96169|AL| |D|0159 |AF|49998|0077054 DRAWING DATA=2621-625-03 |96169|AL| |D|0160 |AF|49998|0069001 DRAWING DATA=2621-625-03 |96169|AL| |D|0161 |AF|49998|0072044 DRAWING DATA=2621-625-03 |96169|AL| |D|0162 |AF|49998|0069580 DRAWING DATA=2621-625-03 |96169|AL| |D|0163 |AF|49998|0062209 DRAWING DATA=2621-625-03 |96169|AL| |D|0164 |AG|49998|0065301 DRAWING DATA=2621-625-03 |96169|AL| |D|0165 |AG|49998|0075974 DRAWING DATA=2621-625-03 |96169|AL| |D|0167 |AH|49998|0058799 DRAWING DATA=2621-625-03 |96169|AL| |D|0168 |AH|49998|0072714 DRAWING DATA=2621-625-03 |96169|AL| |D|0169 |AH|49998|0075954 DRAWING DATA=2621-625-03 |96169|AL| |D|0170 |AH|49998|0027555 DRAWING DATA=2621-625-03 |96169|AL| |D|0172 |AJ|49998|0032592 DRAWING DATA=2621-625-03 |96169|AL| |D|0173 |AJ|49998|0035233 DRAWING DATA=2621-625-03 |96169|AL| |D|0174 |AJ|49998|0036435 DRAWING DATA=2621-625-03 |96169|AL| |D|0175 |AL|49998|0034587 DRAWING DATA=2621-625-03 |96169|AL| |D|0176 |AL|49998|0031758 DRAWING DATA=2621-625-03 |96169|AL| |D|0177 |AL|49998|0032520 DRAWING DATA=2621-625-03 |96169|AL| |D|0178 |AL|49998|0032671 DRAWING DATA=2621-625-03 |96169|AL| |D|0179 |AL|49998|0037460 DRAWING DATA=2621-625-03 |96169|AL| |D|0180 |AL|49998|0036663 DRAWING DATA=2621-625-03 |96169|AL| |D|0181 |AL|49998|0036941 DRAWING DATA=2621-625-03 |96169|AL| |D|0182 |AL|49998|0037691 DRAWING DATA=2621-625-03 |96169|AL| |D|0185 |AK|49998|0034494 DRAWING DATA=2621-625-03 |96169|AL| |D|0186 |AL|49998|0040759 DRAWING DATA=2621-625-03 |96169|AL| |D|0187 |AL|49998|0033485 DRAWING DATA=2621-625-03 |96169|AL| |D|0188 |AL|49998|0037555 DRAWING DATA=2621-625-03 |96169|AL| |D|0189 |AL|49998|0048190 DRAWING DATA=2621-625-03 |96169|AL| |D|0190 |AL|49998|0032497 DRAWING DATA=4640418 |80064| E| |D|0001 | E|00026|0000000 DRAWING DATA=4674155 |80064| F| |D|0001 | F|49998|0216200 DRAWING DATA=7285297 |53711| E| |D|0001 | E|49998|0862180 DRAWING DATA=7285297 |53711| E| |D|0002 | E|49998|0392982 DRAWING DATA=7285297 |53711| E| |D|0003 | E|49998|0280881 DRAWING DATA=7285297 |53711| E| |D|0004 | E|49998|0204692 DRAWING DATA=8617511 |53711| N| |D|0001 | |49998|3447332 DOCUMENT REF DATA=ANSI/ASQ-Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=ASTM-B139 | | | |121001|A| | | DOCUMENT REF DATA=ASTM-B150 | | | |190401|A| | | DOCUMENT REF DATA=ASTM-B369 | | | |200401|A| | | DOCUMENT REF DATA=ASTM-B505 | | | |140401|A| | | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=MIL-STD-2035 | | |A |950515|A| | | DOCUMENT REF DATA=SAE AMS 6931 | | |D |171201|A| | | DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=MIL-DTL-15024 | | |G |180303|A| | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=MIL-DTL-32286 | | | |090408|A|2 | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A| 1| | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=A-A-59004 | | |B |181118|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=0900-LP-001-7000 | | | |810101|C| |01| DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=T9074-AS-GIB-010/271 | | |1 |140911|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 ;The 2 1/2"" Ball Valve must be in accordance with Naval Ship Systems Command Drawing 508-4674155, except as amplified or modified herein.; 3.1.1 ;Bolt holes on mounting flanges must not be drilled.; 3.2 ;NOTE: The dimension, .047 +.000/-.015, in zone B20 of Drawing 4674155 is a radius.; 3.3 Thrust Washer Material - Thrust washer, ;Item 13 on Drawing 4674155 and Item 21 on Drawing 4674155; to be Nylatron GSVQ-II (Nylon 66 with molybdenum disulfide) in accordance with MIL-DTL-32286, as manufactured by Quadrant Engineering Plastic Products (EPP). 3.4 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Body, item 26 on Drawing 4674155 and Tailpiece, item 2 on Drawing 4674155; Material - ;ASTM-B369, Alloy UNS C96400; Part - ;Stem, item 3 on Drawing 4674155; Material - ;ASTM-B150, Alloy C63200, Temper TQ50; Part - ;Stem Retaining Nut, item 4 on drawing 4674155; Material - ;ASTM-B505, Alloy UNC C90300, or ASTM-B139, Alloy UNC C51000, Temper H04; Part - ;Ball, item 23L1 on Drawing 8617511; Material - SAE-AMS-6931 Note: Mechanical properties for bars, forgings and forging stock over 10"" must be as specified in the applicable drawing. If the mechanical properties are not provided in the drawing, the mechanical properties specified in SAE-AMS-6931 Table 2 for material 6"" to 10"", must be applied. Part - ;Seats (Q3), item 12 on Drawing 7285297; Material - MD71-GG Mearthane (Graphite Filled Urethane). Material must be manufactured by Mearthane Products Inc. Cranston, RI. (Properties Specified Below Only) ITEM PROPERTY ASTM TEST METHOD VALUE (A) Hardness D2240 70 +/- 5 Shore D (B) Specific Gravity D792 1.18 +/- 0.02 (C) Tensile Strength D412 (DIEC) 5000 PSI MIN (D) Compression-Defl D575 700 PSI MIN @ 2% DEF. (E) Tensile Impact D1822 300 FT-LB/SQ IN (Note 1) (TYPE L SPECIMEN) (F) Water Absorption D570 1.5% MAX (1 Week at R.T.) Note 1: These values are minimum averages. Separate specimen values may not vary more than 25% under the specified minimum. 3.5 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings is still required, but certifications are only required as listed below. Test - Weldability Test of ASTM-B369 material Item - ;Body, item 26 on Drawing 4674155 and Tailpiece, item 2 on Drawing 4674155; Performance - ASTM-B369 Acceptance - ASTM-B369 Test - Pressure Tests Item - Each Assembly Performance - ;General Notes 5 on Drawing 508-4674155; Acceptance - ;General Notes 5 on Drawing 508-4674155; Test - Non-Destructive Tests Item - ;Weld Repair and/or Production Weld (as applicable); Performance - Per applicable fabrication specification Acceptance - Per applicable fabrication specification 3.6 Radiography is required on ;Body, item 26 on Drawing 4674155 and Tailpiece, item 2 on Drawing 4674155; . 3.7 ;Surface waviness must be verified prior to Teflon coating; 3.8 Confidential Hydrostatic Test Pressures - When test pressures are confidential, certification must reference ;845-4640418, Rev E; and the item number to which the item was tested in lieu of the actual pressures. Any drawing requirement to mark the working pressure on the item does not apply and is strictly prohibited. 3.9 Chemours Company (formerly DuPont) Teflon Coating 850G-204 and 852G-201. Use of Chemours Company (formerly DuPont) Teflon Coating 851N-204 and 852N-201 is acceptable until exhausted - Teflon coating of ball(s) must be in accordance with general note ;8; of drawing ;8617511; . 3.9.1 Naval Ordnance Systems Command OD 10362 First Revision dated 15 Aug 1961 is provided by Contract Support Library Reference Number CSD018 in ECDS at https://register.nslc.navy.mil/ 3.9.2 CSD099 provides guidance for acceptance/rejection of teflon-coated valve balls after valve assembly production testing. 3.10 Contract Support Library - Additional requirements for this item are identified as Contract Support Library Reference Number ;CSD099; in ECDS at https://register.nslc.navy.mil/ 3.11 A visual inspection shall be performed on the finished seat with acceptance criteria on critical surfaces per CSD167 in the ECDS (Electronic Contractor Data Submission) system at: https://register.nslc.navy.mil/. 3.12 The pressure tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For pressure tests below 100 PSIG, the pressure tolerance must be +1 PSIG / -0 PSIG. For pressure tests at or above 100 PSIG up to and including 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 50 PSIG. For pressure tests above 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG, rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 200 PSIG. The pressure test time tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure test time tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For a test duration up to and including 1 hour, the tolerance must be +5 minutes / - 0 minutes. For a test duration of more than 1 hour up to and including 24 hours, the tolerance must be +30 minutes / - 0 minutes. For a test duration of more than 24 hours, the tolerance must be +60 minutes / - 0 minutes. 3.13 O-ring grooves and mating sealing surfaces must be inspected per the contractually invoked drawings or specifications. When the drawings or specifications do not provide specific defect criteria or state that no defects are allowed, the General Acceptance Criteria (GAC) standard must be used for inspecting O-ring grooves and mating sealing surfaces only. Repairs to sealing surfaces and O-ring grooves with unacceptable defects may be accomplished within the limits of the size and tolerances provided in the applicable drawing. Repairs thatwould exceed these limits require approval (including final dimensions). The data that is red lined (crossed out) is excluded from the GAC for this contract and is not to be used for acceptance or rejection criteria. The GAC document is identified as Contract Support Library Reference Number CSD008 at https://register.nslc.navy.mil/ 3.14 Seat Stack Height Measurement - To ensure that each seat is within tolerance, check each seat singularly by measuring the seat height over the ball. This measurement is calculated by adding one-half ball diameter to the half stack height dimension on the drawing. Limits are determined by the ball diameter tolerance and the half stack height tolerance. Check dimensions by measuring from the seat back face to top of ball. Manufacturers of seats that do not have a ball of the required size available will be required to manufacture a dummy ball or segment of a ball with sufficient spherical surface to check the above dimension. 3.15 Thread Lubricant - Thread lubricants containing molybdenum disulfide must not be used on this material. Bacteria in water, especially seawater, causes molybdenum disulfide to break down. The by-products of the breakdown form compounds which attack the fasteners. Anti-galling compound A-A-59004 must be used as a replacement when thread lubricant is required for assembly. 3.16 Internal Threads - All internal threads must be formed by cutting. Cold forming of internal threads is not acceptable. 3.17 Component Identification Description (CID) - When applicable drawing(s) and/or specification(s) specify that a nameplate or identification plate is required, the CID number ( ;CID T886375107; ) must be added. When no plate is specified, an identification plate in accordance with MIL-DTL-15024, Type ""C"" on brass or Type ""H"" on aluminum must be securely attached to each assembly showing the above CID number. No assembly must be shipped without the CID number attached. 3.18 Welding or Brazing - When welding, brazing, and allied processes are required, as invoked by Section C paragraph 3 requirements, they must be in accordance with S9074-AR-GIB-010A/278, 0900-LP-001-7000 for brazing of piping and pressure vessel applications, or S9074-AQ-GIB-010/248 for brazing of other applications. For all production and repair welding and brazing, personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, as applicable. Repair welding is not permitted on ;UNS C90300 material; . Procedures and Qualification Data must be submitted for review and approval prior to performing any welding or brazing. 3.19 Certificate of Compliance - (SPECIAL EMPHASIS MATERIAL) The Contractor must prepare and submit a certificate of compliance certifying that the items/components furnished under this contract comply with the requirements of the procurement document, including any/all invoked specifications and drawings. 3.20 Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format. Definitions are provided elsewhere in the Contract/Purchase Order. 3.20.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide a copy of this request to the QAR. Requests must include the information listed below. a. A complete description of the contract requirement affected and the nature of the waiver/deviation (non-conformance), including a classification of Critical, Major, or Minor. b. Number of units (and serial/lot numbers) to be delivered in this configuration. c. Any impacts to logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel or impacts to the operational use of the product. d. Information about remedial action being taken to prevent reoccurrence of the non-conformance. 3.20.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted using the ECDS (Electronic Contractor Data Submission) system at https://register.nslc.navy.mil/ 3.20.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract. ECPs must be prepared in Contractor format, and must include the following information: a. The change priority, change classification (Class I or Class II), and change justification. b. A complete description of the change to be made and the need for that change. c. A complete listing of other Configuration Items impacted by theproposed change and a description of the impact on those CIs. d. Proposed changes to documents controlled by the Government. e. Proposed serial/lot number effectivities of units to be produced in, or retrofitted to, the proposed configuration. f. Recommendations about the way a retrofit should be accomplished. g. Impacts to any logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel in support of the product. h. Impacts to the operational use of the product. i. Complete estimated life-cycle cost impact of the proposed change. j. Milestones relating to the processing and implementation of the engineering change. 3.21 Mercury Free - Mercury and mercury containing compounds must not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Mercury contamination of the material will be cause for rejection. 3.22 NAVSEA 0948-LP-045-7010 - Any applicable requirements of NAVSHIPS 4410.17,NAVSEA 0948-LP-045-7010, or 0948-045-7010 which the contractor must meet are included in this contract/purchase order. The above documents are for GovernmentUse Only. Further application of the above documents is prohibited.prohibited. 3.22.1 Marking of material with a Material Designator per the Drawing is also prohibited, with the exception of Fasteners. Fasteners must be marked with a Material Symbol/Designator as specified elsewhere in this contract. ^ QUALITY ASSURANCE REQUIREMENTS ^ 3.23 See CDRL DI-MISC-80678 (Test Certification) - A statement of tests performed, listing the pieces tested must be furnished along with a copy of the test results. Certification must include the contractor's name, address and date, quantity inspected, identified to the contract/purchase order and item number, and the Contractor's or authorized personnel's signature. Test certifications must reference the standard/specification, including the revision, to which the testing was performed and the acceptance crite...
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/e4406f8748874227871450b0c29cd736/view)
- Record
- SN06966046-F 20240216/240214230054 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |