Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF FEBRUARY 29, 2024 SAM #8129
SOLICITATION NOTICE

J -- Static Display (C-47/F-111)

Notice Date

2/27/2024 10:29:38 AM
 

Notice Type

Solicitation
 

NAICS

238320 — Painting and Wall Covering Contractors
 

Contracting Office

FA4608 2 CONS LGC BARKSDALE AFB LA 71110-2438 USA
 

ZIP Code

71110-2438
 

Solicitation Number

FA460824QS011
 

Response Due

3/8/2024 12:30:00 PM
 

Archive Date

03/23/2024
 

Point of Contact

Shanecer Johnson, Phone: 3184569725, SSgt Gabriel Robison, Phone: 3184563505
 

E-Mail Address

shanecer.johnson@us.af.mil, gabriel.robison@us.af.mil
(shanecer.johnson@us.af.mil, gabriel.robison@us.af.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

The contractor shall provide all management, tools, supplies, equipment, parts, and labor necessary to accomplish the painting of the static display aircraft. The contractor will also be responsible for ensuring environmental regulation compliance. � The objective of this service is to properly prep, sand, prime, and paint the Barksdale Global Power Museum C-47, and F-111, static display aircrafts. All bird proofing will be removed, and any remnants of nests/wildlife will be removed/disposed of, and new bird proofing installed prior to painting. � Prior to cleaning and paint removed, the area under the aircrafts will be tarped to contain paint chips for proper disposal. �Surface contamination will be removed through use of high-pressure washer utilizing water only. �After sufficient drying time, existing paint will be scraped and sanded to feather edge, peeled or otherwise defective paint and to properly scuff surface in preparation for paint application. Care will be taken by contractor during task in order to protect ground underneath and around aircraft from negative environmental impact. �At the end of each day or prior to a rain event, paint chips collected on the tarps will be swept up and placed into drums. �Tarps will be reused to the greatest extent possible to reduce the amount of waste generated. All paint chips, paint, rags and debris generated will be managed as directed by the Base Hazardous Waste Program Manager. Contractor will meet with Program Manager prior to the start of any activities. �If any corrosion/metal deterioration is discovered, it will be removed and repaired prior to paint application. The aircraft is to be painted in its current paint scheme with all current insignia and markings. Insignia and markings (i.e., stars and bars, tail number) will be repainted in the same size, color, and location as they are currently. Stenciling will be reapplied in the proper location and size and painted on. The aircraft engine inlet covers and landing gear will be repainted as well. The windows will also be prepped and painted and have the same polyurethane clear coat as the rest of the aircraft. Vinyl stickers will not be used unless approved by curator. Unpainted surfaces (landing, taxi lights, navigation, and position lights, etc.) will be masked off and protected from paint overrun.� � Care will be taken by contractor during task in order to protect ground underneath and around aircraft from negative environmental impact. Primer (LICP 200 Industrial primer or better) will be applied to ensure solid paint application. The color coats will be Industrial Catalyzed Urethane type paint or better (subjective to approval by curator). You must obtain a wet mil thickness of 4.0-4.5 mils. One coat applied in two medium wet passes may be adequate to accomplish the above specification. If not, a second coat will be applied. Then 2 or more coats of Valspar AC4400 Clear coat HS or better will be applied to give a high gloss and long-lasting UV protection.� � Paint application depends on chemical composition of the paint used. �All paint and primers containing hazardous air pollutants (HAPs) and/or volatile organic compounds (VOCs) cannot be sprayed and must be applied by rolling or brushing. �All SDS's must be provided to the CE Environmental Office.� � �
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/eed5acc48af041fc8f817e72e730af34/view)
 

Place of Performance

Address: Barksdale AFB, LA 71110, USA

Zip Code: 71110

Country: USA
 

Record

SN06978073-F 20240229/240227230046 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |