SOURCES SOUGHT
66 -- 6665 Back Panel
- Notice Date
- 3/7/2024 6:57:13 AM
- Notice Type
- Sources Sought
- NAICS
- 314999
— All Other Miscellaneous Textile Product Mills
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M924R0004
- Response Due
- 3/14/2024 12:00:00 PM
- Archive Date
- 03/29/2024
- Point of Contact
- Kenneth Pliska614-692-5373, Herman Poe614-692-2865
- E-Mail Address
-
Ken.Pliska@dla.mil, Herman.Poe@dla.mil
(Ken.Pliska@dla.mil, Herman.Poe@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- NSN��� 6665-01-279-5318 Item���� Back Panel����� Cage/Part Number���� BACK PANEL RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS(MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES BID SET AVAILABLE. FULL AND OPEN COMPETITION APPLIES. SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MIL-STD-130N (1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY RQ035: ITEM MAY CONTAIN BATTERIES ""FINAL INSPECTION AND ACCEPTANCE OF THE ITEM SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.� TECHNICAL INSPECTION IS REQUIRED.� THE CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL INFORMATION AVAILABLE TO VERIFY THAT THE ITEM MEETS ALL TECHNICAL REQUIREMENTS. COUNT, KIND, AND CONDITION INSPECTIONS ARE NOT ACCEPTABLE.� THIS NOTE TAKES PRECEDENCE OVER MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6, QUOTATIONS BY NON-MANUFACTURERS (APR 1984, DCSC 52.217-9C01). FINAL INSPECTION OF PACKAGING, IF REQUIRED, MAY BE CONDUCTED ELSEWHERE."" ����������� IAW BASIC DRAWING NR 80063 A3085390 REVISION NR D�� DTD 12/10/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3097562 REVISION NR A�� DTD 07/29/1988 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3097560 REVISION NR A�� DTD 07/28/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3097566 REVISION NR B�� DTD 05/08/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085184 REVISION NR B�� DTD 01/23/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085195 REVISION NR B�� DTD 08/09/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 MP-A39708 REVISION NR B�� DTD 08/20/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 MP-A39711 REVISION NR A�� DTD 01/01/1939 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085174 REVISION NR N�� DTD 07/15/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085175 REVISION NR L�� DTD 10/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085297 REVISION NR C�� DTD 11/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085369 REVISION NR C�� DTD 11/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085371 REVISION NR C�� DTD 11/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085395 REVISION NR D�� DTD 01/14/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3130951 REVISION NR A�� DTD 11/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3130952 REVISION NR���� DTD 11/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3165766 REVISION NR���� DTD 11/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085204 REVISION NR C�� DTD 11/23/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085271 REVISION NR A�� DTD 11/23/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085299 REVISION NR C�� DTD 11/16/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 MP-A39705 REVISION NR C�� DTD 10/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085173 REVISION NR K�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085173 REVISION NR B�� DTD 06/12/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085184 REVISION NR N�� DTD 06/19/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085190 REVISION NR E�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085202 REVISION NR B�� DTD 06/23/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085210 REVISION NR E�� DTD 06/23/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085277 REVISION NR F�� DTD 06/23/1995 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3097554 REVISION NR B�� DTD 02/09/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3191276 REVISION NR���� DTD 03/30/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085209 REVISION NR F�� DTD 05/09/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085195 REVISION NR P�� DTD 04/05/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085195 REVISION NR B�� DTD 08/09/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085214 REVISION NR D�� DTD 12/30/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085216 REVISION NR L�� DTD 06/20/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085217 REVISION NR E�� DTD 07/27/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085256 REVISION NR G�� DTD 01/23/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085379 REVISION NR A�� DTD 08/06/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085438 REVISION NR B�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085301 REVISION NR B�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085190 REVISION NR A�� DTD 08/03/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085390 REVISION NR A�� DTD 01/22/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085184 REVISION NR B�� DTD 01/23/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085203 REVISION NR C�� DTD 03/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085207 REVISION NR B�� DTD 03/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085208 REVISION NR C�� DTD 03/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085211 REVISION NR D�� DTD 06/23/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085212 REVISION NR A�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085218 REVISION NR C�� DTD 03/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085278 REVISION NR C�� DTD 06/23/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085288 REVISION NR A�� DTD 08/20/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085298 REVISION NR A�� DTD 03/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085446 REVISION NR C�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085459 REVISION NR B�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085465 REVISION NR E�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085472 REVISION NR D�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085274 REVISION NR B�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085279 REVISION NR E�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085291 REVISION NR F�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085294 REVISION NR D�� DTD 05/07/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085296 REVISION NR B�� DTD 12/30/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085303 REVISION NR E�� DTD 06/13/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085373 REVISION NR���� DTD 09/26/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085386 REVISION NR A�� DTD 07/29/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3097563 REVISION NR B�� DTD 11/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085174 REVISION NR D�� DTD 01/25/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085190 REVISION NR A�� DTD 09/26/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085185 REVISION NR J�� DTD 03/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085287 REVISION NR D�� DTD 09/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085360 REVISION NR D�� DTD 05/08/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085513 REVISION NR L�� DTD 09/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085191 REVISION NR C�� DTD 07/28/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085286 REVISION NR C�� DTD 12/10/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085290 REVISION NR C�� DTD 12/10/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085393 REVISION NR C�� DTD 08/02/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085394 REVISION NR B�� DTD 12/10/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085213 REVISION NR E�� DTD 12/30/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085543 REVISION NR K�� DTD 06/23/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3190420 REVISION NR���� DTD 03/30/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085201 REVISION NR J�� DTD 06/23/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085258 REVISION NR F�� DTD 07/15/1994 PART PIECE NUMBER: IAW REFERENCE UNK DI-NDTI-80809B NOT 2 REVISION NR B�� DTD 12/11/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085339 REVISION NR C�� DTD 07/15/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085292 REVISION NR B�� DTD 07/15/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085390 REVISION NR A�� DTD 09/26/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3097556 REVISION NR A�� DTD 11/21/1989 PART PIECE NUMBER: IAW REFERENCE QAP 80063 A3097558 REVISION NR���� DTD 09/26/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085195 REVISION NR L�� DTD 09/27/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3085185 REVISION NR J�� DTD 02/25/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3097560 REVISION NR A�� DTD 02/25/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 N7RDECZ001 REVISION NR���� DTD 02/18/1997 PART PIECE NUMBER:
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/7488329c42a84bdcac113b1314d13d56/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN06990163-F 20240309/240307230049 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |