SOURCES SOUGHT
13 -- 120mm Mortar Shell Bodies
- Notice Date
- 3/28/2024 10:43:22 AM
- Notice Type
- Sources Sought
- NAICS
- 332993
— Ammunition (except Small Arms) Manufacturing
- Contracting Office
- W6QK ACC-PICA PICATINNY ARSENAL NJ 07806-5000 USA
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-24-X-0ZQ9
- Response Due
- 4/26/2024 12:00:00 PM
- Archive Date
- 05/11/2024
- Point of Contact
- Kaley Casagrande, John C. Scott
- E-Mail Address
-
kaley.m.casagrande.civ@army.mil, john.c.scott158.civ@army.mil
(kaley.m.casagrande.civ@army.mil, john.c.scott158.civ@army.mil)
- Description
- IMPORTANT INFORMATION: This market survey is for informational and planning purposes only and shall NOT be construed as a Request for Proposal; therefore, no contract will be awarded from this announcement. No reimbursement will be made for any costs associated with providing information in response to this announcement or any follow-up information requests. This notice is not to be construed as a commitment by the Government for any purpose other than market research.� REQUIREMENT: The U.S Army Contracting Command-New Jersey (ACC-NJ), Picatinny Arsenal, NJ, on behalf of the Office of the Project Manager Combat Ammunition Systems (PM CAS), both located at Picatinny Arsenal, New Jersey is conducting market research to identify potential sources within the National Technology and Industrial Base (NTIB) capable of manufacturing and delivering the following 120mm Mortar Shell Bodies in support of Fiscal Year (FY) 25 through FY 30 requirements: The M933A1/M934A1 High Explosive (HE) Cartridge's hot forged steel shell body is 120mm in diameter, approximately 16 inches long with a weight of approximately 20 lbs. The M931 Full Range Practice Cartridge (FRPC) shell body matches the M934A1 in size, shape and weight. The M929 White Phosphorous (WP) Smoke Cartridge's hot forged shell body is 120mm in diameter, approximately 16 inches long with a weight of approximately 20 lbs. The M930 Visible Light (VL) Illuminating and M983 Infrared (IR) Cartridge utilize a 2-piece steel shell body. The front shell body is approximately 10 inches long and 20 lbs while the rear shell body is approximately 8 inches long and weighs approximately 5 lbs; both halves are 120mm in diameter. The purpose of this survey is to obtain current information on the capability of potential sources to provide these products to the warfighter in support of Fiscal Year (FY) 25 through FY 30 requirements. Responses shall include the following information for the Government�s review and assessment: a. Company's contact information including organization�s name, address, point of contact, phone number, fax number, e-mail address, business size, taxpayer identification number, Unique Entity ID and CAGE Code (as applicable); b. A summary that includes a brief description of the contractor's capabilities and facilities to include parent organization�s name/address/point of contact identification/email address, and their capabilities; c. Past manufacturing experience with mortar shell bodies (60/81/120mm) within the last 10 years; d. Projected monthly delivery capability and lead time for delivery of 120mm Shell Bodies. Responses should address capability to consistently meet the Government's required monthly production of up to 20,000 120mm HE OR FRPC Shell Bodies per month, up to 5,000 120mm Smoke Shell Bodies per month, and up to 3,000 120mm Illumination Shell Bodies per month concurrently, as well as minimum sustaining and maximum capacity rates. Delivery for the 120mm Shell Bodies will be needed by Q3 FY26 at the rates stated; e. A description of facilities, equipment including key specifications or capabilities, manufacturing process, inspection (destructive and non-destructive) capabilities, personnel (numbers, experience, specialized skill sets), proven monthly production capacity and/or potential capability, and possible partnering/teaming arrangements. Responses should include how the aforementioned factors relate to the specific technical requirements of 120mm Shell Bodies; f. Evidence In-house of Quality Assurance System(s) in order to support 120mm Shell Bodies production. Responses shall not exceed 15 pages in length and should provide sufficient detail for the U.S. Government to make a reasonable assessment regarding your company�s capability to produce this item at the required rate. NO CLASSIFIED information shall be submitted. Please identify any proprietary information submitted.� All information provided will not be returned and will be held in confidential status. The Technical Data Packages (TDPs) for the 120mm Shell Bodies are available for informational purposes upon request and receipt of all required documents. Technical data is marked Distribution D, therefore data distribution is only authorized to the Department of Defense (DoD) and U.S. DoD contractors. PM CAS reserves the right to deny the release of technical data to any source at its discretion. DoD and U.S. DoD contractors interested in receiving a copy of the TDP are required to submit a signed and completed DD Form 2345, Militarily Critical Technical Data Agreement; AMSTA-AR Form 1350, Technical Data Request Questionnaire; and Non-Disclosure Agreement for the Government's consideration. Capability Statements shall be emailed to the Contracting Officer John Scott via email at john.c.scott158.civ@army.mil and Contract Specialist Kaley Casagrande via email at kaley.m.casagrande.civ@army.mil. in this notification no later than 26 April 2024. All inquiries shall be made via email ONLY, telephone inquiries will not be accepted.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/16eac23b9937435b8ad10d5b6eb1391d/view)
- Record
- SN07013384-F 20240330/240328230049 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |