SOURCES SOUGHT
66 -- CHIPS Calnet autoprober
- Notice Date
- 4/30/2024 6:21:12 AM
- Notice Type
- Sources Sought
- NAICS
- 334413
— Semiconductor and Related Device Manufacturing
- Contracting Office
- DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
- ZIP Code
- 20899
- Solicitation Number
- NIST-SS24-CHIPS-0050
- Response Due
- 5/14/2024 8:00:00 AM
- Archive Date
- 05/29/2024
- Point of Contact
- Tracy Retterer, Forest Crumpler
- E-Mail Address
-
Tracy.retterer@nist.gov, forest.crumpler@nist.gov
(Tracy.retterer@nist.gov, forest.crumpler@nist.gov)
- Description
- BACKGROUND NIST requires Wincal software, six (6) on-wafer probes, two (2) dc probes, one (1) capacitor sensor, one (1) autoprober, one (1) autoprober, one (1) autoprober install, one (1) autoprober training, and one (1) autoprober maintenance agreement. The autoprober must include a 3-year extender warranty with maintenance. The autoprober will be used for on-wafer probing of integrated circuits. The objective of the requirement is to enable fully autonomous wafer-level probing. This requirement supports the NIST CHIPS program to develop and disseminate NIST best practices and algorithms for on-wafer measurement. The goal of this requirement is to supply a fully autonomous wafer probing up to 110 GHz measurement for the microwave materials lab. The contractor shall deliver Wincal software, six (6) on-wafer probes, two (2) dc probes, one (1) capacitor sensor, one (1) autoprober, one (1) autoprober, one (1) autoprober install, one (1) autoprober training, and one (1) autoprober maintenance agreement. Delivery will be to NIST Boulder. Installation and training required. Each item must include a 3-year extender warranty. NIST is seeking information from sources that may be capable of providing a commercial item solution that meets or exceeds the following draft minimum specifications: Line Item 0001:� Wincal 5 base version Description:� on-wafer metrology software Quantity: 1 Line Item 0002:� IXT110-A-GSG-100 Description: on-wafer probes Quantity: 2 Line Item 0003:� IXT110-A-GSG-50 Description: on-wafer probes Quantity: 4 Line Item 0004:� 780-00506 KIT,DCP PROBE MT,40MM,DUAL TRIAX,W.FLEXSHIELD Description:� dc probes Quantity: 2 Line Item 0005:� DCP-HTR PROBE HOLDER, HIGH Description:� dc probe holder Quantity: 2 Technical Specifications High performance DC probe holder quasi-Kelvin probe with two SSMC jack interfaces (male connectors) Kelvin point within probe housing replaceable tip available separately (not included). Line Item 0006:� 154-001 BLADE,DCP-HTR,19UM DIA ,FULL R,BOX OF 10 Description:� dc probe tips Quantity: 1 Technical Specifications BLADE,DCP-HTR,19UM DIA ,FULL R,BOX OF 10 1 PK = 10 EA blades packaged in FormFactor supplied box assemblies which include 154-001 label, foam, and box. Line Item 0007:� 103-775 KIT, CABLE, PARAMETRIC Description:� capacitance tests Quantity: 1 Technical Specifications Cable Kit for Current or Capacitance Parametric Tests This Cable Kit includes the following items: Qty = 4 104-330-LC Triax Cable, Large to Small Connector, Low Noise, 60 cm (24 in.) Qty = 4 104-365 Coaxial Cable with BNC Connectors, 140 cm (55 in.) Qty = 4 104-341 Triax-to-BNC Adapter, Guard Shorted Line Item 0008: S200/SA/M-03745 SYS, SUMMIT200, SEMI-AUTOM-PACKAGE Description:� Semiautomatic probe station Quantity:� 1 Technical Specifications Precision 4-axis 200mm wafer stage & control system Integrated floor standing system. High rigidity universal platen System Controller Single LCD screen 24"", Ergo arm (X2-LCD1) Computer accessory mount kit (X2-CAMK) VELOX Prober Control Software Shipping Restraint kit Integrated MicroChamber (169-809) CORD,POWER,USA,250V, NEMA L6-15/C19,15A,3.0M (132-589) PLUG,POWER,USA,220V,20A NEMA L6-20 LOCKING Line Item 0009:� 178-718 ASSY, SHELF, REAR, SUMMITC, LAMBDA, BETA Description:� rear shelf Quantity: 1 Line Item 0010:� TS-417-14R THRML SYS, ATT, ASP200, -60 / 300,200-220V,60 (50) Hz Description:� thermal control and system Quantity: 1 Technical Specifications COMPLETE THERMAL SYSTEM FOR SUMMIT200 PLATFORM FOR 200mm MODULAR THERMAL CHUCK (Air Cooling Technology) ATT ''Enhanced'' C-SERIES, -60C TO 300C, 200-220VAC, 60HZ /200VAC, 50Hz Enhanced ''LowNoise'' Precision Thermal Controller Fast Transition 2 stage Air Chiller Integrated LCD touch screen Local control & remote access tools Controller/Chiller Interconnect cables Probe station specific coolant hoses &facility connections (200-220 VAC 60 Hz, 200 VAC 50 Hz) � Line Item 0011:� 763-00084 MICROSCOPE, EVUE V, 40X, PRO Description:� microscope control and system Quantity: 1 Technical Specifications eVue V 40X PRO. eVue V Digital Imaging System with High Performance ""PRO Package"" for use with FormFactor probe stations. PRO Package containing Multi-Z (Optical Z-Contact System, AutoFocus) Multi-Cam (Wafer-Probe Navigation, Picture-in Picture) Multi-View (Hi-Res Video, Probe Card Alignment, probe zoom views) Large imager chip with 20MP 40X Extended Zoom range Sub-micron Programmable Remote Focus Stage Integrated LED Illumination Microscope mount, intelligent objective lens mount (1) Velox 3.4 and above Line Item 0012: 174-365 ASSY, TOP HAT BELL PUSHER ,EVUE,SUMMIT200 Description:� Semiautomatic probe station Quantity:� 1 Technical Specifications For eVue III made after 5/31/17 and all eVue IV. MicroChamber Top-hat objective cover/ring with control guide for eVue digital imaging system Line Item 0013:� 780-01864 KIT,eVUE V,SUMMIT200/12k,MANUAL Z SCOPE Description:� microscope mount Quantity: 1 Technical Specifications This mounting kit is required for installing eVue V on SUMMIT200, TESLA200 and S12k in combination with a manual Z SCOPE. The kit contains: all adapters, all cables, and all screws. Line Item 0014:� S200-ACC-ARF120-EW-MPX2 S200 KIT,E/W,120GHz AUTORF,MPX2 Description:� autonomous rf measurement suite Quantity: 1 Technical Specifications Autonomous RF Sigma kit for SUMMIT200 probe station, measurements up to 120GHz using Keysight N5291 only. 2x RPP504 Programmable Positioners 1x RFA-K120-E-TH RFA arm incl FlexShield for RF TopHat for mounting Keysight N5291 1x RFA-K120-W-TH RFA arm incl FlexShield for RF TopHat for mounting Keysight N5291 181-630 4 port RF TopHat for S200 780-01218 MPX2 control box 780-01305MPX2 mounting kit for S200 AutoRF Velox Module for autonomous calibration Line Item 0015:� 780-00508 KIT,UPGRADE,MPX EXT-CTRL FOR 2 MTZ POS,DPP504 Description:� Positioner Quantity: 2 Line Item 0016:� RPP504-NS-67 POSITIONER, MOTORIZED, WITH ARM SUB-67 GHz, NORTH/SOUTH Description:� North/south positioners Quantity: 2 Technical Specifications Motorized positioner RPP504 with RF base and probe arm for north and south position. Accepts RF probes up to 67 GHz or multi-contact probes. Fits to CM300xi, E300 probe stations, and EPS, Summit 11/12K probe stations with adapter. Line Item 0017: 780-00169 Assy, RF Arm Storage Description:� Semiautomatic probe station Quantity:� 1 Technical Specifications RFA Arm storage pod, for the storage of populated arms in the RFA series -- arms compatible with RPP504 and RPP404 dovetail equipped positioners. RFA Probe Arm can be stored whilst the probe, VNA Frequency extender and or tuners as appropriate are fitted, along with associated port savers and flex-shields for quick, easy and safe band swapping. One pod stores one populated probe arm. Hinged, anti-static, cleanroom safe window protects probes from accidental damage due to dropped objects from above, and deters finger contact with probe tips but also allows safe ergonomic loading of the probe arm. Line Item 0018: 134-710 TRIAX PANELS,HS BRIDGE, 12K,NOISE LOCK Description:� triax Quantity:� 1 Technical Specifications List technical specifications. If your requirement has several components, create a specification list for each (for example, B. Software Requirements) Line Item 0019:� 102-518 Description:� LENS,OBJECTIVE,20X M PLAN APO,MITUTOYO Quantity: 1 Line Item 0020:� SRV-INSTALL-SYS SYSTEM INSTALLATION FORMFACTOR CERTIFIED FSE Description:� On-site installation Quantity: 1 Technical Specifications On-site system installation of FormFactor Probe Station by a Certified Service Engineer. Probe station unpackaging, assembly, and accessory setup. Probe station system verification, thermal calibration (if applicable), assist with station placement, Basic Software/Prober Training (Load, Align, Contact, Video). Contractor covers all travel, lodging, per-diem to/from customer site (one trip).� Contractor is responsible for all shipping, unpackaging, and disposal of packaging materials. Customer Facility Connections based on current Station Facility. Customer guide. Customer equipment and/or personnel to lift/move station Line Item 0021:� SRV-APPS-TRAIN Description:� On-site training Quantity: 1 (optional + 1) Technical Specifications Three-day training. Applications Engineer to train and/or optimize FormFactor product solutions against the user's specific application(s). Service is done at the customer's site with their equipment. Benefits from training include increased accuracy, throughput and efficiencies. Pricing includes all labor and all travel expenses. Line Item 0022:� SRV-BRS Description:� On-site service and maintenance agreement Quantity: 3 Technical Specifications Silver service agreement, 1 year, on PA200 BlueRay probe station. Includes one annual on-site maintenance. HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORRMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response:� Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact specialist listed at the bottom of this notice as soon as possible, and preferably before the closing date and time of this notice. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company�s Unique Entity ID (UEI). Identify laboratory equipment that your company sells that is of the nature addressed in the BACKGROUND section of this notice.� Include brand name, make, model, and/or other distinguishing information. State if your company is the manufacturer of the identified equipment or is a retailer or wholesaler that normally sells the identified equipment.� If the latter, indicate whether the manufacturer authorized in writing for your company to sell the identified equipment on behalf of the manufacturer. Describe performance capabilities and relevant or beneficial physical and functional features for any equipment you identified to satisfy the NIST-identified minimum specifications described in this notice. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section above that could be viewed as unduly restrictive or contain unnecessary barriers that adversely affect your ability to fully participate and indicate why.� In such a scenario, please offer suggestions for how the market research notice and draft minimum specifications could be made more inclusive and competitive. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business.� See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement.� Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the aforementioned equipment such as: delivery time after your company accepts the order; FOB shipping terms: manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services.� Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State published price, discount or rebate arrangements for aforementioned equipment and/or provide link to access company�s published prices for equipment and services.� State whether the aforementioned equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details. If the aforementioned equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors in which you provided the aforementioned or similar equipment.� Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the government�s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice.� Questions should be submitted so that they are received by 12:00 p.m. Eastern Time on May 14, 2024.� Questions will be anonymized and answered via sources sought notice amendment following the question submission deadline. IMPORTANT NOTES The information received in response to this notice will be reviewed and considered so that NIST may appropriately solicit for its requirements in the near future.� This notice should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract.� Responses will not be considered as proposals or quotations. No award will be made as a result of this notice.� NIST is not responsible for any costs incurred by the respondents to this notice. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and appropriate. Thank you for taking the time to submit a response to this request!
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/10f8344f90f94906ae9dfb5c3e4f8517/view)
- Place of Performance
- Address: Boulder, CO 80305, USA
- Zip Code: 80305
- Country: USA
- Zip Code: 80305
- Record
- SN07047564-F 20240502/240430230102 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |