SOURCES SOUGHT
17 -- Electromagnetic Aircraft Launch System (EMALS) Engineering Change Proposal (ECP)-0104 Electrical Isolation
- Notice Date
- 7/2/2024 2:46:14 PM
- Notice Type
- Sources Sought
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- NAVAL AIR SYSTEMS COMMAND PATUXENT RIVER MD 20670-5000 USA
- ZIP Code
- 20670-5000
- Solicitation Number
- N00019-24-RFPREQ-TPM251-0032
- Response Due
- 7/16/2024 3:00:00 PM
- Archive Date
- 07/31/2024
- Point of Contact
- Hannah Puchkoris, Margo O'Rear
- E-Mail Address
-
hannah.puchkoris.civ@us.navy.mil, margo.b.orear.civ@us.navy.mil
(hannah.puchkoris.civ@us.navy.mil, margo.b.orear.civ@us.navy.mil)
- Description
- Introduction: This Sources Sought Notice is being posted to satisfy the requirement of Federal Acquisition Regulation (FAR) 15.201(e) and Defense Federal Acquisition Regulation Supplement (DFARS) PGI 206.302-1.� The Naval Air Systems Command (NAVAIR) is seeking eligible business firms who can provide a Ford Class capability to quickly and safely electronically isolate individual Electromagnetic Aircraft Launch System (EMALS) hardware, catapults, and/or power trains to enable EMALS maintenance and repair efforts while concurrently conducting fixed wing flight operations or while maintaining a Ready Alert posture. The efforts will entail all required Non-Recurring Engineering (NRE) needed to design and test a new EMALS electrical power distribution configuration with incorporation of new switches, cabling, and hardware needed to enable �Electrical Isolation� of individual EMALS catapults and system electrical hardware. The NRE phase is planned to start in FY25 and go through FY27 and includes delivery of production drawings and shipboard installation control drawings. Kit installs to support Ford Class CVN retrofits are required to occur in FY29 � FY30. The testing of the prototype Electrical Isolation system will occur at Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ at the EMALS Shipboard Functional Demonstration (SFD) test facility.� The planned contract award date is March 2025 to meet kit install schedule. The government will review industry responses to this Sources Sought for the Electrical Isolation of EMALS systems in order to determine whether it is appropriate to issue a competitive solicitation on an unrestricted basis or a sole source award to General Atomics, San Diego, CA, the designer, developer and manufacturer of EMALS and AAG, in accordance with 10 U.S.C. 3204(a)(1), as implemented in FAR part 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. Currently, General Atomics, the designer and developer of the EMALS and AAG systems, is the only source possessing the requisite system knowledge, engineering expertise, and technical data that can meet the�Government's requirements without unacceptable delays and duplicative costs. NAVAIR expects to receive from each respondent a full response with capability summary, which contains a detailed description that clearly demonstrates that your company currently possesses or has authorized access to the necessary technical data, or has a viable plan to obtain, generate, or otherwise secure authorized access to the necessary technical data, and that it will be maintained throughout the duration of the effort being solicited. Background: The shared nature of the current EMALS energy storage and high-power distribution systems does not provide sufficient capability for fleet operators to be able to easily, safely, and rapidly isolate high power electronic components.� An Electrical Isolation capability is needed for the Fleet to be able to conduct EMALS maintenance and repairs while concurrently performing Ford class CVN fixed wing flight operations.� Furthermore, the desired Electrical Isolation capability will enhance the Fleets� ability to also stand and maintain a CVN Ready Alert posture, while maintenance and repair is conducted on other non-ready alert catapults. Special Requirements: Experience with Electrical Isolation System design Experience with the development, implementation, updating, managing, and maintenance of an integrated master schedule (IMS) for the EMALS Electrical Isolation System development (NRE Phase) showing total program activities for the prime contractor and major subcontractors Must establish and maintain a System Safety Program (SSP) in accordance with MIL-STD-882 to support achievement of overall system safety objectives Shall perform and document a System Safety Hazard Analyses (SSHA) and Operating Support Hazard Analyses (O&SHA) to identify potential EMALS Electrical Isolation system hazards and causal factors associated with shipboard recovery, operations, and maintenance. Contractor must perform a Software Safety approach to identify software critical functions and link them to hazards identified in the SSHA and/or O&SHA.� Each software critical function will need to have consequences identified Contractor shall provide a Cybersecurity Strategy Implementation Plan (CSIP) The Government will manage environmental, shock, vibration, and E3 testing with contractor support.� The contractor shall manage all other testing. Eligibility: The applicable NAICS code for this requirement is 336413, Other Aircraft Part and Auxiliary Equipment Manufacturing, with a Small Business Size Standard of 1,250 employees.� The Product Service Codes (PSC) is 1720 - Aircraft Launching Equipment.� The results of this Sources Sought Notice will also be used to determine if any Small Business Set-Aside opportunities exist. In addition, this market research tool is being used to identify potential and eligible firms of all sizes, prior to determining the method of acquisition. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Note: FAR 52.219-14 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count �first tier subcontracted� work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2020-O0008 dated 04/03/20 at https://www.acquisition.gov/browse/index/far). To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize �similarly situated entities� to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in the response to this notice to assist the Government�s capability determination. Disclaimer: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. Capability Package Submittal Information and Instructions: Responsible parties may identify their interest by responding to the requirement with a capability statement (no more than 10 pages in length). No phone inquiries will be entertained. Responses shall be made in writing by e-mail to the attention of the listed points of contacts using the contact information provided. Interested parties are requested to submit their capability statement along with their company name, address, and any comments or questions to Hannah Puchkoris, hannah.l.puchkoris.civ@us.navy.mil and Margo O�Rear at margo.b.orear.civ@us.navy.mil by 6:00 PM (EST) on 16 July 2024. Late responses submitted past the day and time may not be considered. Classified material shall not be submitted. All submissions should include this Sources Sought Notice Reference Number, company name, company address, CAGE code, UEI number, and a point-of-contact who is able to discuss the Capability Statement submitted.� Point-of-contact information should include name, position, phone number, and email address.� The Government will acknowledgement receipt of the response.� All information submitted will be adequately safeguarded from unauthorized disclosure in accordance with FAR 15.207.� All submissions must be clearly marked with the following caption: �For Official Use Only, Releasable to Government Agencies for Evaluation Purposes Only.�� Responses that fail to comply with the above instructions or present ideas not pertinent to subject, may not be reviewed.� All information received in response to this Notice that is marked proprietary will be handled accordingly.� Information submitted in response to this Notice is submitted at no cost to the Government and will not be returned.� The Government is under no obligation to provide responses or comments to information received from interested persons but may request additional information following review.� Note:� If the interested person is a foreign concern or if a U.S. interested person has a team member or partner who is a foreign entity, adherence to all International Traffic and Arms Regulations (ITAR) is required.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/03feba17f7944d4093c7379376e3707f/view)
- Place of Performance
- Address: Joint Base MDL, NJ 08733, USA
- Zip Code: 08733
- Country: USA
- Zip Code: 08733
- Record
- SN07116207-F 20240704/240702230120 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |