SOURCES SOUGHT
34 -- PLASMA TABLE � MWMSS
- Notice Date
- 7/15/2024 12:12:32 PM
- Notice Type
- Sources Sought
- NAICS
- 333992
— Welding and Soldering Equipment Manufacturing
- Contracting Office
- W6QK ACC-RI ROCK ISLAND IL 61299-0000 USA
- ZIP Code
- 61299-0000
- Solicitation Number
- W519TC24PLASMATABLE0001
- Response Due
- 8/15/2024 8:00:00 AM
- Archive Date
- 08/30/2024
- Point of Contact
- KEVIN C. GILMORE
- E-Mail Address
-
kevin.c.gilmore.civ@army.mil
(kevin.c.gilmore.civ@army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Title: W519TC24PLASMATABLE0001 PLASMA TABLE � MWMSS � W519TC24PLASMATABLE NAICS Code: 333992 PSC: 3433 Description(s): The purpose of this Sources Sought / Market Research is to identify potential sources capable of providing a Computer Numerically Controlled (CNC) Plasma Table to support the Metalworking and Machining Shop Set (MWMSS). The Plasma Table Kit consists of the following items: 1 each Brand Name � FastCut CNC Scout 4� x 4� Plasma Table 1 each Brand Name �Hypertherm Machine Torch, Model #059719 (IAW Drawing 11B5190937) 1 each Brand Name (Or Equal) � Pelican Cutter Accessory Case (IAW Drawing 11B5190799) 1 each Plasma Table Trunk (IAW Drawing 11B5190177) The requirements are as follows: Nominal Table size: 4�x4� Minimum Table Capacity: 5/8� steel (400 pounds) Minimum Travel Speed: 500 ipm Minimum cut speed: 400 ipm Maximum Slat Spacing: 3� Maximum Power Requirement: 120VAC, 15 amps Computer Connection: Ethernet Maximum Setup Time: 5 hours from fully disassembled in storage containers Shall include an automatic torch height control. Shall include a magnetic break away torch holder. Shall be compatible with the Hypertherm Powermax 65 with CPC port. Shall be compatible with the Hypertherm 15 degree hand torch (PN: 059471), 75 degree hand torch (PN: 059474), or machine torch (PN: 059477). Shall be able to be disassembled and packaged without cutting or welding in the two containers specified by drawings 11B5190177 and 11B5190799 with protective packaging materials for shipment. Table shall be operated using g-code. Software Requirements: Table shall include software capable of building g-code from .dxf files. Table shall include any software that is necessary to operate CNC table. Software shall not require internet access to operate. Software requirements shall not exceed: Windows 7 Processor: Multicore, 2.26 GHz with 3 MB of L2 Cache RAM: 4GB Video Card: 256 MB, 128-bit interface, DirectX 10.1 support
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9d7725a884724fa9b7c6665c25e5fe79/view)
- Record
- SN07129115-F 20240717/240715230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |