SAMDaily.us | PRESOL | J | Platinum Preventative Maintenance and Service Contract for the Olympus VS200 Slide Scanning Microscope System

SAMDAILY.US - ISSUE OF JULY 26, 2024 SAM #8277
SOLICITATION NOTICE

J -- Platinum Preventative Maintenance and Service Contract for the Olympus VS200 Slide Scanning Microscope System

Notice Date: 7/24/2024 6:39:18 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 811210 —
Contracting Office: NATIONAL INSTITUTES OF HEALTH NIDA Bethesda MD 20892 USA
ZIP Code: 20892
Solicitation Number: 75N95024Q00439
Response Due: 7/30/2024 1:00:00 PM
Archive Date: 08/14/2024
Point of Contact: Robert Bailey, Phone: 3014517586
E-Mail Address: rob.bailey@nih.gov
(rob.bailey@nih.gov)
Description: �(i)�� This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii)�� The solicitation number is 75N95024Q00439 and the solicitation is issued as a Request for Quotation (RFQ). This acquisition is for a commercial item or service and is conducted under the authority of the FAR part 13�Simplified Acquisition Procedures; and FAR Part 12�Acquisition of Commercial Products and Commercial Services, and is not expected to exceed the Simplified Acquisition Threshold (SAT). A fixed-price type of purchase order is contemplated for this requirement. (iii)�� The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) Number 2024-05, dated April 22, 2024. � (iv)�� The North American Industry Classification System (NAICS) code for this procurement is �811210 - Electronic and Precision Equipment Repair and Maintenance, and the small business size standard is $34M. This requirement shall be solicited using full and open competitive procedures. (v)�� DESCRIPTION �� The Government requires the following brand name or equal services: Instrument: Olympus VS200 Slide Scanning Microscope System Serial Number: 200825339 Service Plan: Platinum Preventative Maintenance and Service Contract (vi)�� Please refer to Attachment 1 � Statement of Work for details and information describing the brand name or equal salient characteristics and requirements. (vii)�� The Government anticipates award of a firm fixed-price purchase order for this acquisition, and the anticipated period of performance to be twelve (12) months for the �Base Period, with three (3) Option Periods of twelve (12) months : Base Period: �� August 8, 2024 � August 7, 2024 Option Period 1:�� August 8, 2025 � August 7, 2025 Option Period 2: �� August 8, 2026 � August 7, 2026 Option Period 3: �� August 8, 2027 � August 7, 2027 Option Period 4: �� August 8, 2028 � August 7, 2028 The place of performance shall be 49 Convent Drive, Building 49, Room B1A51, Bethesda, Maryland 20892. (viii)�� The provision at FAR Clause 52.212-1 Instructions to Offerors�Commercial Products and Commercial Services (SEP 2023) is applicable and incorporated by reference into this solicitation. (ix) The provision at FAR Clause 52.212-2, Evaluation-Commercial Products and Commercial Services (NOV 2021) is applicable and incorporated by reference into this solicitation. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Each quote will be evaluated in strict conformity with the evaluation factors, utilizing quantitative scores and written critiques.�The evaluation will be based upon the demonstrated capabilities of the prospective Contractor in relation to the needs of the project as set forth in the solicitation. The quote will also be evaluated taking into consideration any price reductions for the requirement being ordered.� A price reasonableness determination will be made and a best value analysis will be performed.� The best value analysis will take into consideration the results of the technical evaluation, price evaluation, and the ability to complete the work within the Government's required schedule.�The analysis will document that the award represents the best value to the Government (considering technical evaluation factors, past performance, and price) to meet the Government�s needs. The Government reserves the right to issue an order to the best advantage of the Government, technical merit, price, and other factors considered. All aspects of a quote are subject to discussion, including price, technical approach and terms and conditions.� At the completion of discussions, the Contractor will ensure the technical and price quote reflects the mutual understandings of the requirement and if requested, submit a revised technical and price quote to the Contracting Officer. The Government may request clarifying information from the Contractor, as it relates to its quote. If an award will be made without conducting discussions, Contractors may be given the opportunity to clarify certain aspects of their quote (e.g., the relevance of the contract, the Contractor's past performance information, and adverse past performance information to which the Contractor has not previously had an opportunity to respond) or to resolve minor or clerical errors. Discussions will not be held with any Offeror determined to be technically unacceptable. The Government reserves the right to make a single award, multiple awards, or no award at all as a result of the solicitation.� In addition, the solicitation may be amended or canceled as necessary to meet the Government�s requirements. A tradeoff process shall be used for this acquisition because it has been determined to be in the best interest of the Government to consider award to other than the lowest priced Offeror or other than the highest technically rated offeror. All evaluation factors other than cost or price, when combined, are more important than cost or price. For this acquisition, the following considerations will be part of the trade-off process: Technical Evaluation Factors including Past Performance, and Price. The evaluation factors are used by the technical evaluation committee when reviewing the technical quotes. The factors below are listed in order of its relative importance for evaluation purposes. 1.� Technical Capability and Functionality �� NIMH shall evaluate the offeror�s technical approach for overall capability and functionality in relation to the General Requirement, Salient Characteristics, Quantity and Deliverables as described in the Statement of Work.. In addition, the offeror will be evaluated to determine if they are an authorized provider of maintenance for the Olympus VS200 Slide Scanning Microscope System. 2. �Contract Management and Customer Support �� NIMH shall evaluate the offeror�s ability to provide a high level of customer service, particularly in the area of initial responsiveness and resolution of device and service problems. Specifically, the Government will evaluate the Offeror�s capability based on its description of any applicable warranty, customer support process. 3.� Speed of Service�� NIMH shall evaluate the offeror�s technical approach for completeness, feasibility, soundness and practicality of the proposed approach and work plan for accomplishing the requirements of the Statement of Work. PAST PERFORMANCE�� The Offeror should provide past performance information. Past performance information should cover a minimum of 1 year in relevant and recent services and deliveries of comparable systems.� ""Relevant"" means active or completed contracts that required offeror to evaluate, maintain and repair the Olympus VS200 Slide Scanning Microscope System. ""Recent"" means active contracts or contracts completed within five years from the issuance date of the NIDA solicitation. The Offeror shall provide at least one reference for any project identified under the experience factor that has a performance period within the past three years. For each reference, the offeror shall provide: (1) Organization/contracting partner's name; (2) Point of contact's (POC) name and contact information: Current phone numbers. Valid email addresses; (3) Desc ription that precisely explains: General scope of the contract. Specific requirements of the contract. Offerors will be evaluated based on information obtained from references provided by the offeror, other relevant past performance information obtained from other sources known to the Government, and any information supplied by the offeror concerning problems encountered on the identified contracts and corrective action taken.� Furthermore, the Government will assess the relative risks associated with each offeror. Performance risks are those associated with an offeror's likelihood of success in performing the acquisition requirements as indicated by that offeror's record of past performance. The assessment of performance risk is not intended to be the product of a mechanical or mathematical analysis of an offeror's performance on a list of contracts but rather the product of subjective judgment by the Government after it considers all available and relevant information. EVALUATION OF OPTIONS It is anticipated that any contract awarded from this solicitation will contain option periods. In accordance with FAR Clause 52.217-5, Evaluation of Options, (July 1990), the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement, except when it is determined in accordance with FAR 17.206(b) not to be in the Government's best interests. Evaluation of option periods will not obligate the Government to exercise the options. An evaluation of this factor will only be conducted on offerors and quotes who have been determined to be technically acceptable. PRICE EVALUATION Offerors price quote will be evaluated for reasonableness. For a price to be reasonable, it must represent a price to the government that a prudent person would pay when consideration is given to prices in the market. Normally, price reasonableness is established through adequate price competition, but may also be determined through cost and price analysis techniques. Price evaluation will not be conducted on any Offeror determined to be technically unacceptable.. (x) The provision at FAR Clause 52.212-3, Offeror Representations and Certifications - Commercial Products and Commercial Services (MAY 2024), is applicable and incorporated by reference into this solicitation. (xi) The provision at FAR Clause 52.212-4, Contract Terms and Conditions�Commercial Products and Commercial Services (NOV 2023), applies to this acquisition. See Attachment 2. (xii) The provision of FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (MAY 2024), applies to this acquisition. See Attachment 3. (xiii) There are no additional contract requirement(s) or terms and conditions applicable to this acquisition. (xiv) The Defense Priorities and Allocations System (DPAS) is not applicable to this requirement. (xv) Responses to this solicitation must include sufficient information to establish the interested parties� bona-fide capabilities of providing the product or service. Responses to this solicitation must include clear and convincing evidence of the Offeror�s capability of fulfilling the requirement as it relates to the government requirements stated in this solicitation.� Basic cost and price information in the Offeror�s proposal must contain sufficient information to allow the Government to perform a basic analysis of the reasonableness of the Offeror to supply the required goods/services. Any other information or factors that may be considered in the award decision may include such factors as: past performance; special features required for effective service coverage; trade-in considerations; warranty considerations; maintenance and service coverage availability; serial, product or catalog number(s); product description; delivery terms, and prompt payment discount terms. The Contractor shall submit its quote electronically. Offerors MUST verify the valid certifications, registrations, and Representation and Certifications from the System of Award Management (SAM) applications at www.SAM.gov, which may be indicated on the Offeror�s cover sheet. In addition the vendor Unique Entity Identifier (UEI) and the certification of business size must be included in the response. All Offerors must have an active registration in the System for Award Management (SAM) www.sam.gov. All responses must be received no later than July 30, 2024, 4:00 PM EST. Late responses may not be accepted. All responses must reference solicitation number 75N95024Q00439. Responses must be submitted electronically to rob.bailey@nih.gov. For information regarding this solicitation, please contact Rob Bailey by email at rob.bailey@nih.gov or by phone at 301-451-7586. (xvi) DATE QUESTIONS DUE: Questions and requests for clarification must be submitted electronically to the Contract Specialist, Rob Bailey, at rob.bailey@nih.gov on or before 4:00 PM EST, July 26, 2024. Fax responses will NOT be accepted. ATTACHMENTS Attachment 1 - Statement of Work (SOW) Attachment 2 - FAR 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services (NOV 2023) Attachment 3 - FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (MAY 2024) Attachment 4 � Invoice and Payment Instructions
Web Link: SAM.gov Permalink
(https://sam.gov/opp/92b21a3d9838408494da63580906b853/view)
Place of Performance: Address: Bethesda, MD 20892, USA; Zip Code: 20892; Country: USA
Record: SN07141151-F 20240726/240724230112 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

J -- Platinum Preventative Maintenance and Service Contract for the Olympus VS200 Slide Scanning Microscope System