SAMDaily.us | PRESOL | J | Hangar Fall Arrest System

SAMDAILY.US - ISSUE OF JULY 27, 2024 SAM #8278
SOLICITATION NOTICE

J -- Hangar Fall Arrest System

Notice Date: 7/25/2024 1:16:15 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 811310 — Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Contracting Office: W7N6 USPFO ACTIVITY WAANG 141 FAIRCHILD AFB WA 99011-9439 USA
ZIP Code: 99011-9439
Solicitation Number: F6T3MXGFALLARREST
Response Due: 8/8/2024 2:00:00 PM
Archive Date: 08/23/2024
Point of Contact: Matthew R. Richard, Phone: 5092477223, Robert D. Jones, Phone: 5092477224
E-Mail Address: matthew.richard@us.af.mil, robert.jones.88@us.af.mil
(matthew.richard@us.af.mil, robert.jones.88@us.af.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation Number F6T3MXG-FALLARREST is hereby issued as a Request for Quote (RFQ). The Incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-05, Dated 22 MAY 2024 and the Defense Federal Acquisition Regulation Supplement (DFARS) change notice 20240530.� It is the contractor�s responsibility to become familiar with applicable clauses and provisions. �This acquisition is under North American Industry Classification Standards (NAICS) code 811310 with total revenue NTE $12.5M. *Reference only PSC J039 The government intends to award a Firm Fixed Price (FFP) contract to a qualified business deemed responsive in accordance with Federal Acquisition Regulation (FAR) Part 13. Quotes must conform to all requirements outlined in this Request for Quote (RFQ) and will be evaluated based upon the best value of the requirement. This office will consider any late quotes or any late revisions of quotes as non-responsive. In no event shall any understanding or agreement between the Contractor and any Government employee other than the Contracting Officer on any contract, modification, change order, letter or verbal direction to the contractor be effective or binding upon the Government. All such actions must be formalized by a proper contractual document executed by an appointed Contracting Officer. The Contractor is hereby notified that in the event a Government employee other than the Contracting Officer directs a change in the work to be performed or increases the scope of the work to be performed, it is the Contractor's responsibility to make inquiry of the Contracting Officer before making the deviation from the written terms of the contract. Payments or Partial payments will not be made without being authorized by an appointed Contracting Officer with the legal authority to bind the Government. Description of Requirement: The vendor shall provide all labor, material, equipment, and services necessary to furnish and install one (1) Personal Arrest System in hangar 1029 which will conform to the existing structural steel members and clearances of each hangar.�� The system shall not interfere with the operations to pull a KC-135 aircraft into or out of the hangar, but shall provide access to allow maintenance personnel to work on fuselage, tail and wing areas from above.� The system shall match environmental/hazardous conditions in the hangar.� The contractor shall also remove and dispose of the existing Personal Arrest System currently in use. All work shall be performed in accordance with federal, state, local laws and regulations, commercial standards, manufacturer�s recommendations, and this Statement of Work (SOW). CLIN 0001: Install Fall Arrest System QTY: 1 Job Total: $__________________ Statement of Work: DESCRIPTION OF WORK The contractor shall verify all dimensions, elevations, and site conditions prior to starting. GENERAL REQUIREMENTS PURPOSE The purpose of this project is to provide all labor, material, equipment, and services necessary to furnish and install one (1) Personal Arrest System in hangar 1029 WORKMANSHIP All work shall be accomplished in a professional manner by experienced and qualified tradespersons to the complete satisfaction of the COR. WARRANTIES All work completed under this contract shall be guaranteed by the vendor against defects in materials or workmanship for a period of one year from date of final project acceptance. MAINTENANCE PERSONNEL TRAINING RESERVED DAMAGE The vendor shall be responsible for any damage caused to any existing work areas during the entire performance of this project. The vendor shall be responsible to rectify or replace any equipment damaged without additional expense to the Government. ACCESS AND GENERAL PROTECTION/SECURITY POLICY AND PROCEDURES Access and General Protection/Security Policy and Procedures. The vendor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer�s Representative (COR). The vendor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation�s Security Forces, Director of Emergency Services or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, HAF and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes. All commercial, contractor, and sub-contractor�s vehicles are subject to random inspections each time they enter the base. HOURS OF WORK Normal hours of operation for construction are 6:00 am through 4:30 pm Tuesday through Friday, excluding any federally recognized holidays. CUTTING AND PATCHING Cutting and patching includes cutting into existing structures to provide for the performance of the work and subsequent fitting and patching as required to restore surfaces disturbed, damaged or otherwise altered to their original or specified condition. Visual Requirements: Do not cut and patch work in a manner that would result in substantial visual evidence of cut and patch work. Remove and replace work judged by the COR to be cut and patched in a visually unsatisfactory manner. If possible, retain the original installer or fabricator, or another recognized experienced and specialized firm to cut and patch. Use materials for cutting and patching that are identical to existing materials. If identical materials are not available, or cannot be used, use materials that match existing adjacent surfaces to the fullest extent possible with regard to visual effect. Use materials for cutting and patching that will result in equal-or-better performance characteristics. Restore surfaces of patched areas to match adjacent finishes. Where necessary, extend finish restoration into retained adjoining work in a manner, which will eliminate of patching and refinishing. CLEAN-UP The contractor shall clean up and remove from the site all rubbish. The contractor shall leave the premises in a clean, orderly and safe condition, acceptable to the COR. Protect existing building or structures including exterior landscaping and interior contents from damage, dirt and dust during construction related activities. PARKING Adequate on-site parking for contractor vehicles will be designated by the Government. DESCRIPTION OF WORK ***Please see attached SOW (statement of Work) - END OF STATEMENT - Quote Information: Quotes must be submitted and received no later than 2:00 PM Pacific Time 8 AUG 2024. Electronic offers preferred, telephone quotes will not be accepted. Quotes may be e-mailed to the attention of the points of contact listed below. �� Buyer: Robert Jones �� Alternate Buyer:� Matthew Richard �� Email:�� 141MSG.MSC@us.af.mil � Award will only be made to contractors who have registered with System for Award Management (SAM).� Vendors may register at: http://www.sam.gov Submission of Invoices: In accordance with FAR clause 52.212-4(g) the contractor shall submit all invoices electronically utilizing Wide Area Workflow (WAWF).��Procedures for using WAWF are found in DFARS clause 252.232-7003 Electronic Submission�of Payment Requests. Provisions and Clauses: Clauses may be accessed electronically in full text through http://farsite.hill.af.mil. FAC 2023-04, Dated 2 JUN 2023. Contractors must be actively registered with the System for Award Management (SAM) at http://www.sam.gov, and Wide Area Work Flow (WAWF) at http://wawf.eb.mil P = Provisions�� C = Clauses�� * = Provision or Clause required to be Full Text P-FAR 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements - Representation C-FAR 52.203-19, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements P-FAR 52.204-7, System for Award Management Registration C-FAR 52.204-9, Personal Identity Verification of Contractor Personnel P-FAR 52.204-16, Commercial and Government Entity Code Maintenance C-FAR 52.204-18, Commercial and Government Entity Code Maintenance C�FAR 52.204-21, Basic Safeguarding of Covered Contractor Information Systems P-FAR 52.204-22, Alternative Line Proposal P-FAR 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment C-FAR 52.204-25, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment C-FAR 52.204�27, Prohibition on a ByteDance Covered Application C-FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations P-FAR 52.212-1, Instructions to Offerors-Commercial Items P-FAR 52.212-2, Evaluation-Commercial Items Evaluation.� The Government will award a �� contract resulting from this solicitation to the responsible offeror whose offer conforming �� to the solicitation will be most advantageous to the government; price, technical �� acceptability (IAW SOW) and delivery dates are the evaluation criteria.� This is a best value decision.� This office will consider any late quotes or any late revisions of quotes as non-responsive. �� Technical and delivery dates, when combined, are approximately equal to price. P-FAR 52.212-3 ALT I, Offerors Representation and Certifications Commercial Item or �� complete electronic annual representations and certifications at http//orca.bpn.gov C-FAR 52.212-4, Contract Terms and Condition-Commercial Items C-FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive �� Orders-Commercial Item are incorporated by reference, however, for paragraphs (b) and �� (c) the following clauses apply� C-FAR 52.219-28, Post Award Small Business Representation C-FAR 52.222-3, Convict Labor C-FAR 52.222-19, Child Labor � Cooperation with Authorities and Remedies C-FAR 52.222-21, Prohibition of Segregated Facilities C-FAR 52.222-26, Equal Opportunity � C*-FAR 52.222-42, Statement of Equivalent Rates for Federal Hires C-FAR 52.222-50, Combating Trafficking in Persons C-FAR 52.222-55, Minimum Wage Rates Under Executive Order 13658 C-FAR 52.222-62, Paid Sick Leave Executive Order 13706 C-FAR 52.223-5, Pollution Prevention and Right to Know Information C-FAR 52.223-15, Energy Efficiency in Energy Consuming Products C-FAR 52.223-18, Encouraging Contractor Policy to Ban Text Messaging While Driving C-FAR 52.225-13, Restrictions on Certain Foreign Purchases C-FAR 52.225-13, Restrictions on Certain Foreign Purchases C-FAR 52.232-33, Payment by Electronic Funds Transfer-System for Award Management C-FAR 52.232-39, Unenforceability of Unauthorized Obligations C-FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors C-FAR 52.233-3, Protest After Award C-FAR 52.233-4, Applicable Law for Breach of Contract Claim P-FAR 52.247-65, F.O.B. Origin, Prepaid Freight-Small Package Shipments C*-FAR 52.252-2, Clauses Incorporated by Reference � SEE http://farsite.hill.af.mil C*-FAR 52.252-6, Authorized Deviations in Clauses C-DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials C- DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights C- DFARS 252.203-7005, Representation Relating to Compensation of Former DoD Officials P-FAR 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls C-DFARS 252.204-7015, Disclosure of Information to Litigation Support Contractors C-DFARS 252.211-7008, Use of Government-Assigned Serial Number P-DFARS 252.213-7000, Notice to Prospective Suppliers on the use of Past Performance Information Retrieval System-Statistical Reporting in Past Performance Evaluations C-DFARS 252.223-7006, Prohibition on Storage and Disposal of Toxic and Hazardous Materials C-DFARS 252.223-7008, Prohibition of Hexavalent Chromium P*-DFARS 252.225-7000, Buy American Act�Balance of Payments Program Certificate C-DFARS 252.225-7001, Buy American Act and Balance of Payments Program C-DFARS 252.225-7031, Secondary Arab Boycott of Israel C-DFARS 252.225-7048, Export-Controlled Items. C-DFARS 252.232-7003, Electronic Submission of Payment Requests (WAWF instructions provided at time of award) C*-DFARS 252.232-7006 Wide Area Work-Flow Payment Instructions C-DFARS 252.232-7010, Levies on Contract Payments C-DFARS 252.244-7000, Subcontracts for Commercial Items P-DFARS 252.247-7023 ALT III, Transportation of Supplies by Sea�Alt III C*-FAR 52.222-36, Equal Opportunity for Workers with Disabilities �
Web Link: SAM.gov Permalink
(https://sam.gov/opp/76a0132b33de41b39d4d0efc43a7acf8/view)
Place of Performance: Address: Fairchild AFB, WA 99011, USA; Zip Code: 99011; Country: USA
Record: SN07143159-F 20240727/240725230120 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

J -- Hangar Fall Arrest System