SOURCES SOUGHT
99 -- 3-Axis Vertical Milling Machine Center
- Notice Date
- 7/29/2024 9:00:28 AM
- Notice Type
- Sources Sought
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
- ZIP Code
- 20899
- Solicitation Number
- NIST-MML-24-SS15
- Response Due
- 8/7/2024 9:00:00 AM
- Archive Date
- 08/08/2024
- Point of Contact
- Harry L. Brubaker, Phone: 3019758330
- E-Mail Address
-
Harry.Brubaker@nist.gov
(Harry.Brubaker@nist.gov)
- Description
- National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Mail Stop 1640, Gaithersburg, MD, 20899-1640 This is a Sources Sought Notice ONLY.� Requests for copies of a solicitation will not receive a response.� This Notice is for planning purposes only and is not a Request for Proposal or Request for Quotation or an obligation on the part of the National Institute of Standards and Technology (NIST) for conducting a follow-on acquisition. This Notice is to assist the Government in determining if there are any domestic manufactured end product sources for the project title. NIST does not intend to award a contract on the basis of this �Notice, or otherwise pay for the information requested.� No entitlement or payment of direct or indirect costs or charges by NIST will arise as a result of submission of responses to this �Notice and NIST use of such information.� Any proprietary, classified, or sensitive information should be presented as an addendum to the non-restricted/non-proprietary information.� In the absence of such identification, NIST will assume to have unlimited rights to all technical data in the information paper. NO SOLICITATION DOCUMENTS EXIST AT THIS TIME. Requirement: NIST is seeking information on contractors who can provide the following: 3-Axis Vertical Milling Machine Center which is necessary to permit precise, high-quality manufacturing, and sustainability with regards to tool set up, control software, training, and accuracy.� There will be size limitations and key features includes: Installation site has a restrictive doorway. The delivered instrument must be able to fit through a doorway that is 82� high by 69� wide. Max Footprint: 139"" L x 75"" W x 107"" H Max Weight: 5,060 lbs. Table not to exceed 58"" x 11"" with 350lb Capacity. 7.5 hp (5.6 kW) vector drive, 6,000 rpm, 33 ft-lb @1200 rpm, inline direct-drive 400 ipm rapids (X, Y, Z). 400 ipm max cutting in standard mode. Electronic Thermal Compensation to compensate for the expansion and contraction of each linear axis. Controller must have Control Touch Screen, Visual Part Programming System, Self-Diagnostics Feature, background editing with 1 GB Program Memory and User Definable Macros. 20-gallon (76 liter) flood coolant system with a programmable coolant nozzle. The position of the nozzle is controlled via the program and set specifically for each tool length. Wireless Intuitive Probing System (WIPS) which guides the operator through the job set-up process with templates. Automatic Air Gun. 10,000 RPM Grease Packed Inline Direct-Drive Spindle Interested parties shall describe the capabilities of their organization as it relates to the equipment �described above.� NIST anticipates issuing a Request for Quotation in the fourth quarter of FY24.� NIST is seeking responses from all responsible sources, including large and small businesses. The small business size standard associated with the NAICS code for this effort, 333517 Machine Tool Manufacturing is 500 employees.� Please include your company�s size classification, socio-economic status, and the country of origin of the manufactured end product in any response to this notice.� After results of this market research are obtained and analyzed, NIST may conduct a competitive procurement and subsequently award a contract.� Companies that can provide the equipment �are requested to email a written response describing their abilities to harry.brubaker@nist.gov no later than the response date for this amended Sources Sought Notice. The following information is requested to be provided as part of the response to this �Sources Sought Notice: Name, Address, UEID, CAGE code, and point of contact information of your company. Any information on the company�s small business certifications, if applicable. Description of your company�s capabilities as they relate to the equipment described in this notice. A description of your company�s previous experience providing the equipment described in this notice. Indication of whether the equipment �described in this notice is currently offered via your company�s GSA Multiple Award Schedule (MAS) contract, Governmentwide Acquisition Contract (GWAC), or other existing Governmentwide contract vehicle; and, if so, the contract number(s) for those vehicles. Any other relevant information that is not listed above which the Government should consider in finalizing its market research. Place of Manufacture: Is more than 55% of item manufactured domestically, if not where is it manufactured? Responses are limited to a total of twelve (12) pages. The responses must be in MS Word format.� Pages shall be 8�-inch x 11-inch, using Times New Roman 11 Point Font.� Each page shall have adequate margins on each side (at least one inch) of the page. Header/footer information (which does not include any information to be analyzed) may be included in the 1"" margin space.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/4ec025753b7c40c8b8700f9d1d29500e/view)
- Place of Performance
- Address: Gaithersburg, MD 20899, USA
- Zip Code: 20899
- Country: USA
- Zip Code: 20899
- Record
- SN07147664-F 20240731/240729230124 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |