SAMDaily.us | PRESOL | 66 | 3D Printing System

SAMDAILY.US - ISSUE OF AUGUST 24, 2024 SAM #8306
SOLICITATION NOTICE

66 -- 3D Printing System

Notice Date: 8/22/2024 7:15:05 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 333248 —
Contracting Office: W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
ZIP Code: 20783-1197
Solicitation Number: W911QX24Q0174
Response Due: 8/29/2024 8:59:00 AM
Archive Date: 09/13/2024
Point of Contact: Swati Jain, Phone: 3013940045
E-Mail Address: swati.jain2.civ@army.mil
(swati.jain2.civ@army.mil)
Description: COMBO SYNOPSIS SOLICITATION FOR COMMERCIAL ITEMS 1.� Class Code: 59 2.� NAICS Code:� 333248 3.� Subject:� 3D Printing System 4.� Solicitation Number: W911QX24Q0174 5.� Set-Aside Code: N/A 6.� Response Date: 08/29/2024 7.� Place of Delivery/Performance:� U.S. Army Research Laboratory 2800 Powder Mill Rd. Adelphi, MD 20783 8.� �� (i)� This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.� This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. �� (ii)� The solicitation number is W911QX24Q0174.� This acquisition is issued as a Request for Quote (RFQ). �� (iii)� The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular Circular 2024-05, effective 22 May 2024. �� (iv)� The associated NAICS code is 333248. The small business size standard is 750 Employees. �� (v)�� The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable):� Contract Line Item Number (CLIN) 0001: One (1) each, 3D Printing System �� (vi) �Description of requirements: The Contractor shall provide one (1) 3D Printing System that meets the following salient characteritics: o�� Print features less than 200 nanometers (nm) resolution o�� Print volume of at least 100 millimeters (mm) x 100mm x 40mm o�� Writing Speeds: Fine mode writing speeds ranging from 0.05mm�/hr to 0.25mm�/hr for <220nm features, and coarse mode writing speeds from 30mm�/hr to 300mm�/hr for <1200nm features. o�� Tunable up laser for largest features printed concurrently with minimum feature size o�� Capability for sterile environment printing for bio printing o�� Wide variety of resins available including optical transparent, bio-compatible, sol-gel, quartz, and low viscosity. o�� Customers able to create new resins without risking damage to optics o�� Printing possible with no contact to optics �� (vii) Delivery : Delivery is required by 20 Weeks after contract award.� Delivery shall be made to DEVCOM Army Research Laboratory, SHIPPING AND RECEIVING 2800 Powder Mill Rd. Adelphi, MD 20783.� Acceptance shall be performed at DEVCOM Army Research Laboratory.The FOB point is Destination. �� (viii) The provision at 52.212-1, Instructions to Offerors � Commercial, applies to this acquisition.� The following addenda have been attached to this provision: N/A. �� (ix)� The provision at FAR 52.212-2, Evaluation - Commercial Items is applicable to this acquisition.� The specific evaluation criteria to be included in paragraph (a) of that provision are as follows: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and will be most advantageous to the Government, price and other factors considered.� The following factors shall be used to evaluate offers:� Technical, Past Performance and Price.� The Technical element of the evaluation will first be a determination as to whether the proposed product meets the performance characteristics and specifications in the solicitation.� Those offers that meet or exceed the stated performance characteristics and specifications will then be evaluated in terms of technical aspects above the minimum requirements and of those aspects not addressed in the solicitation performance characteristics and specifications that would be most beneficial to the Government. In particular, the Government is willing to trade-off on price for offerors that exceed the following performance characteristics/specifications and/or delivery time: List of Characteristics 1)�� Print minimum features less than 150nm 2)�� Print volume of at least 100mm x 100mm X &Y, and 40mm in Z, [X &Y (substrate plane) and ,Z (normal to substrate)] 3)�� Print with a volumetric speed of maximum throughput of at least 200 mm�/h, 4)�� Femtosecond laser power at least 500 mW to ensure parts are fully-cured and robust 5)�� Tunable laser spot size for largest features printed concurrently with minimum feature size The Technical element of the evaluation shall be based solely on information furnished by the vendor.� The Government is not responsible for locating or securing any information, which is not identified in the proposal. To ensure sufficient information is available, vendors must furnish as part of their proposal all descriptive material (such as cuts, illustrations, drawings, or other information) necessary for the Government to determine whether the product meets or exceeds the performance characteristics and specifications of the requirement.� If the offeror proposes to modify a product so as to conform to the requirement of this solicitation, the offeror shall include a clear description of such proposed modifications and clearly mark any descriptive materials to show modifications.� Past performance will be evaluated based on information provided by the offeror as to actual sales of the proposed product to industry or Government agencies.� Past performance will consider the ability of the offeror to meet technical specifications, delivery schedules (with warranty fulfillment and maintenance reputation included as applicable).� Offerors shall include 3 records of sales from the previous 12 months.� Offerors shall identify a point of contact for each sale by providing a name and telephone number.� Price will be evaluated based on the total proposed price, including options, (if any). Technical and past performance are of equal importance and when combined are significantly more important than price.� The Government reserves the right to award to other than the lowest price and to award without discussions �� (x)� Offerors shall include a completed copy of the provision at FAR 52.212-3 (with its Alternate I), Offeror Representations with its offer. �� (xi)� The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause N/A. �� (xii)� The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition.� The following additional FAR/DFARS clauses cited in this clause are applicable: FAR: 52.204-10, REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (JUN 2020) 52.209-6, PROTECTING THE GOVERNMENT� INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (NOV 2021) 52.219-28, POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (SEP 2021) 52.222-3, CONVICT LABOR (JUN 2003) 52.222-19, CHILD LABOR�COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2022) 52.222-21, PROHIBITION OF SEGREGATED FACILITIES (APR 2015) 52.222-26, EQUAL OPPORTUNITY (SEP 2016) 52.222-36, EQUAL OPPORUNITY FOR WORKERS WITH DISABILITIES (JUN 2020) 52.222-50, COMBATING TRAFFICKING IN PERSONS (NOV 2021) 52.223-18, ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (JUN 2020) 52.225-13, RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (FEB 2021) 52.232-33, PAYMENT BY ELECTRONIC FUNDS TRANSFER�CENTRAL CONTRACTOR REGISTRATION (OCT 2018) 52.232-36, PAYMENT BY THIRD PARTY (MAY 2014) DFARS: 252.203-7005, REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011)252.204-7008, COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) 252.204-7015, DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016) 252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES�REPRESENTATION (DEC 2019) 252.204-7017, PROHIBITION ON THE ACQUISITON OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES�REPRESENTATION (MAY 2021) 252.204-7018, PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2021) 252.223-7008, PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013) 252.225-7000, BUY AMERICAN STATUTE�BALANCE OF PAYMENTS PROGRAM CERTIFICATE (NOV 2014) 252.225-7007 PROHIBITION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING SPECIALITY METALS (DEC 2018) 252.225-7001, BUY AMERICAN AND THE BALANCE OF PAYMENTS PROGRAM (DEC 2017)� 252.232-7010, LEVIES ON CONTRACT PAYMENTS (DEC 2006) 252.237-7010, PROHIBITION ON INTERROGATION OF DETAINEES BY CONTRACTOR PERSONNEL (JUN 2013) 252.244-7000, SUBCONTRACTS FOR COMMERCIAL ITEMS (JAN 2021) 252.246-7008, SOURCES OF ELECTRONIC PARTS (MAY 2018) 252.247-7023, TRANSPORTATION OF SUPPLIES BY SEA (FEB 2019) �� (xiii)� The following additional contract requirement(s) or terms and conditions apply (full text of all FAR/DFARS clauses that contain fill-in information, as well as all local clauses, can be found in the attached Provisions and Clauses Full-Text document): FAR/DFARS Clauses: 52.204-7, SYSTEM FOR AWARD MANAGEMENT (OCT 2018) 52.204-13, SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018) 52.204-16, COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020) 52.204-18, COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020) 52.204-19 INCORPORATON BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) 52.204-20 PREDECESSOR OF OFFEROR (AUG 2020) 52.204-27 PROHIBITION ON A BYTEDANCE COVERED APPLICATION (JUN 2023) 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) 52.232-40, PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (NOV 2021) 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) 252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) 252.225-7055 REPRESENTATION REGARDING BUSINESS OPERATIONS WITH THE MADURO REGIME (MAY 2022) 252.225-7056 PROHIBITION REGARDING BUSINESS OPERATIONS WITH THE MADURO REGIME (JAN 2023) 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING (JUN 2012) 252.232-7017 ACCELERATING PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS�PROHIBITION ON FEES AND CONSIDERATION (APR 2020) 252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) FAR/DFARS FILL-IN/FULL TEXT CLAUSES: 52.252-1, PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) 52.252-2, CLAUSES INCORPORATED BY REFERENCE (FEB 1998) 252.211-7003, ITEM IDENTIFICATION AND VALUATION (MAR 2022) 252.232-7006, WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018) LOCAL CLAUSES: ACC - APG POINT OF CONTACT TECHNICAL POINT OF CONTACT TYPE OF CONTRACT GOV INSPECTION AND ACCEPTANCE TAX EXEMPTION CERT. (ARL) RECEIVING ROOM REQUIREMENTS � APG EXCEPTIONS IN PROPOSAL AWARD OF CONTRACT ADELPHI CONTR. DIVISION URL FOREIGN NATIONALS PERFORMING PAYMENT TERMS �� (xiv)� This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as N/A. �� (xv)� The following notes apply to this announcement: The Government is contemplating a Commercial, Firm Fixed Price (FFP) Contract type for this requirement under the FAR Part 13 Simplified Acquisition Procedures (SAP). In accordance with FAR 32.003, contract financing cannot be provided for this acquisition. �� (xvi)� Offers are due on 11:59 AM eastern standard time 08/29/2024. Submissions should be emailed to Swati Jain, Contract Specialist, swati.jain2.civ@army.mil Questions concerning directed to Swati Jain, Contract Specialist, swati.jain2.civ@army.mil �� (xvii)� For information regarding this solicitation, please contact Swati Jain, Contract Specialist, swati.jain2.civ@army.mil
Web Link: SAM.gov Permalink
(https://sam.gov/opp/207206008d9c4270a118ef577489b642/view)
Place of Performance: Address: Adelphi, MD 20783, USA; Zip Code: 20783; Country: USA
Record: SN07182749-F 20240824/240822230129 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

66 -- 3D Printing System