SOLICITATION NOTICE
66 -- 3D Scanner
- Notice Date
- 9/18/2024 9:14:01 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- FA9302 AFTC PZZ EDWARDS AFB CA 93524-1185 USA
- ZIP Code
- 93524-1185
- Solicitation Number
- FA930224Q0113
- Response Due
- 9/25/2024 10:00:00 AM
- Archive Date
- 09/26/2024
- Point of Contact
- Josiah Broadway, Susana Dryer
- E-Mail Address
-
josiah.broadway@us.af.mil, susana.dryer@us.af.mil
(josiah.broadway@us.af.mil, susana.dryer@us.af.mil)
- Description
- Combined Synopsis/Solicitation � FA930224Q0113 Edwards Air Force base is searching for 3D scanners that are required in Edwards Prototype Lab to 3D scan aircraft and ground support equipment and components to aid in 3D modeling, 3D printing, and reverse engineering during the instrumentation design process. Edwards Prototype Lab it is required to reverse engineer components, such as the ECP (External Camera Pod), to accurately capture surfaces and mounting holes/mounting locations, with an accuracy of 0.001� or less, to obtain reference models aiding in the design of instrumentation components such as PDUs (Power Distribution Units), camera mounts, and DAU mounts. (i) This is a combined synopsis/solicitation for commercial items prepared IAW the format in FAR 12.603 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation for this requirement. Quotes are being requested and an additional written solicitation will not be issued. (ii) This is a request for quotation (RFQ). All responsible sources may submit a firm-fixed price (FFP) quote/offer which shall be considered by the agency. (iii) This combined synopsis/solicitation incorporates provisions and clauses that are in effect through the Federal Acquisition Circular (FAC) 2024-07 as of 29 August 2024, Defense[SD1]� Federal Acquisition Regulation Supplement Publication Notice (DPN) 2024-06 and Air Force Acquisition Circular (AFAC) 2021-0726. (iv) This is a commercial acquisition with a 100% Small Business Set-Aside. Under NAICS for this requirement is 334516 with a business size standard of 1,000 employees. (v) General description of requirement: The Government�s need to purchase 3D scanners for use at Edwards Airforce Base in 3D scanning, aircraft, ground support and 3D modeling. Contract Line-Item Number (CLIN) Nomenclature and Contract Structure: The following represent the CLIN structure for this contract. The CLIN below, as also identified within the model contract, Full description of item and location are spelled out in the Salient Characteristics, these represent an estimated maximum quantity for each item. However, the Government reserves the right to order none, some, or more than the estimated quantities of each item solely based upon its needs. CLIN - Description - QTY � Unit 0001 � Scantech Sharp 49- 3D Scanner- 1 � Each 0002- ScanTech TrackScan-Probe � 1 Each 0003- ScanTech SIMSCAN 42 Scanner- 1 Each 0004- Geomagic Design� with 1st Year maintenance � 2 Each 0005 � Geomagic Software USB Dongle � 2 Each 0006 � 6 Cans (400ml) � 1 Each 0007- Scantech Targets 3 M � 1 Each 0008- Scantech � 6mm Magnetic Targets 100 pcs � 1 Each 0009- Scantech Targets 12 mm � 1 Each 0010 � Geomagic Design� Training Onsite- 3 Days, up to 4 people. All trainee expenses included 0011- Scantech Targets 6mm � 1 Each 0012� Shipping (if applicable) (vi)The specific requirements are outlined in the Salient Characteristics and are attached to this solicitation for use in 3D scanning different equipment and aiding in 3D modeling. (vii) The Date and places of delivery and acceptance and FOB point for this requirement are as follows: This is a one-time purchase requirement. Delivery will be made to Edwards Airforce Base. (viii) The provision at 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services, applies to this acquisition. (ix) The provision at 52.212-2, Evaluation-Commercial Products and Commercial Services, applies to this acquisition.� 52.212-2 Evaluation�Commercial Products and Commercial Services (Nov 2021), is amended as follows: (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Lowest Priced Technically Acceptable (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer�s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) (x) The Provision at 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial services, applies offerors are advised to submit a completed copy of the provision or have it completed on Sam by the Submission due date. (xi) The provision at 52.212-4, Contract Terms and Conditions-Commercial Services, applies to this acquisition. (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Products and Commercial Services, applies to this acquisition. Additional FAR, DFARS, and DAFFAR[SD3]� clauses and provisions that apply to this acquisition can be found in the attached model contract. (xiii) No additional contract requirements or terms and conditions apply to this acquisition. There are no contract financing arrangements. There are no additional warranty requirements that are above and beyond what is consistent with customary commercial practices. (xiv) Defense Priorities and Allocations System (DPAS): Is Not Applicable (xv)�The date, time and place�offers�are due. Questions are due no later than: 23 Sep 2024 Offers are due no later than: 25 Sep 2024 Questions and Offers must be sent by email to: josiah.broadway@us.af.mil; susana.dryer@us.af.mil; (xvi)�For additional information or questions, please contact: Contract Specialists: Josiah Broadway at josiah.broadway@us.af.mil, and Contracting Officer: Susana Dryer at susana.dryer@us.af.mil.d. All equipment, supplies and materials are to be provided by the contractor. they shall not be refurbished.�
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/289eac1d8b3640b799466628e34a0048/view)
- Place of Performance
- Address: Edwards, CA 93524, USA
- Zip Code: 93524
- Country: USA
- Zip Code: 93524
- Record
- SN07216562-F 20240920/240918230120 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |