AWARD
99 -- CNC Lathe
- Notice Date
- 11/20/2025 6:41:15 AM
- Notice Type
- Award Notice
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- W6QK ACC-RI ROCK ISLAND IL 61299-0000 USA
- ZIP Code
- 61299-0000
- Solicitation Number
- W519TC26PA012
- Archive Date
- 12/05/2025
- Point of Contact
- Pamela Grys
- E-Mail Address
-
pamela.m.grys.civ@army.mil
(pamela.m.grys.civ@army.mil)
- Award Number
- W519TC26PA012
- Award Date
- 10/22/2025
- Awardee
- MARUKA U.S.A. INC Grandview MO 64030 USA
- Award Amount
- 864099.00
- Description
- LATHE The only commercially available Turning Center with Live Tooling found to have all the Primary and Secondary Requirements described below combined into one machine is the Nakamura � Tome WT300MMY-F014. Primary Requirements for the CNC Turning Center with Live Tooling: � Tools driven by direct drive motors built into the turrets � 25 HP A2-8 Spindle on both Right and Left � 4� (102mm) Bar capacity on both spindles � Fully closed loop control for X, Y & Z axes on both turrets having direct scale (magnetic) feedback. � � Fit within the maximum available area of 18 ft - 0 inches x 18 ft - 0 inches � Positioning accuracy of less than .0002 inch � Airbag Collision Protection (Nakamura Only) Secondary Requirements for the CNC Turning Center With Live Tooling: � Basic Machine o 2-turret specification (BMT 65) � Control o Human Machine Interface (HMI) Operating Terminal with 19.0"" touch control display screen and Power failure Package. o Fanuc F32iB CNC controller software o Dual USB Ports o Maintenance + Alarm Trouble Shooting o Remote service capability o Machine data connector o Production package - high speed canned cycles o Ethernet � Screen Text o Screen display English o Language on operating system screen: English o Language on NC Screen: English o Language on PC Screen: English � Spindle o Left Spindle (Main Spindle) ? Through-spindle hole dia. 102 mm ? Bar stock machining capacity dia. 4� ? Maximum spindle speed 2500 rev/ min ? Output 30 min continuous 15/18 kW ? Continuous Torque Rating (133 lb/ft) ? 12� Chuck for left spindle (main spindle) ? Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4.0 in. ? Full C-axis (CF-Control) ? C-Axis Clamp Braking Torque (188 lb/ft) ? Polar Coordinate Interpolation ? Cylindrical Interpolation o Right Spindle (Sub Spindle) ? Through-spindle hole dia. 102 mm ? Bar stock machining capacity dia. 4� ? Maximum spindle speed 2500 rev/ min ? Output 30 min continuous 15/18 kW ? Continuous Torque Rating (133 lb/ft) ? 12� Chuck for right spindle (sub spindle) ? Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4.0 in. ? Full C-axis (CF-Control) ? C-Axis Clamp Braking Torque (188 lb/ft) ? Polar Coordinate Interpolation ? Cylindrical Interpolation � Turrets o Turret 1: ? 24 station BMT 65 ? 12 Station Live Tool ? Servo Drive Index ? Y axis ? Rotating Tool Spindle Speed 3600 rev/ min ? Rotating tool 5.5/3.7 Kw � 7.5 HP o Turret 2: ? 24 station BMT 65 ? 12 Station Live Tool ? Servo Drive Index ? Rotating Tool Spindle Speed 3600 rev/ min ? Rotating Tool 5.5/3.7 Kw � 7.5 HP � Coolant Supply / Chip Removal o Water-Soluble coolant o Chip conveyor (right discharge) ? Filtration Accuracy: 50 um approximately 90% ? Carrying Amount ? Long Chip: 794 L/h ? Short Chip: 13 L/h o High pressure coolant system for two turret specifications ? Chip Blaster F2-60 ? One pump for each turret (24 HP) ? 92.5 Gallon Tank � Measuring / Monitoring o Manual in-machine tool pre-setter (removable type, Left Spindle and Right Spindle) o Full closed loop control for X axis (turret 1) direct scale feedback, resolution 0.01 um o Full closed loop control for X axis (turret 2) direct scale feedback, resolution 0.01 um o Full closed loop control for Z axis (turret 1) direct scale feedback, resolution 0.01 um o Full closed loop control for Z axis (turret 2) direct scale feedback, resolution 0.01 um o Manual Machine tool presetter (Left Spindle side) o Manual Machine tool presetter (Right Spindle side) � Automation o Signal lamp 4 colors (red, yellow, green, blue) o 1/F for exchanging control signals between the machine and peripheral equipment using EtherNet/IP o Interface for Bar feeder (EtherNet/lP Interface) with terminal block for power supply � Power Requirements o 220 volts, 3 phase, 72 KVA � Control o High Speed Canned Cycle o Optional Block Skip (soft key type 2-9) o X axis movement direction compliant with ISO standard � Construction o Bar feeder o Spindle Liners 1pc for 1.00"" RS o Coolant collector extension � Tools driven by direct drive motors built into the turrets � Fit within the maximum available areas of 18 ft - 0 in x 18 ft - 0 in � Positioning accuracy of less than .0002 inch � Special Construction o Bar Feeder Additional Parts / Products: LNS TurboChip Conveyor Hinge Belt Type. Right Discharge LNS Quick Load Servo 105+ Barfeeder. �� to 4-1/8� LNS Quick Load Servo Barfeeder Installation Steel Spindle Liners for Main Spindle 3/8� � 4� 91/4� Increments Qty 13) Steel Spindle Liners for Second Spindle 3/8� � 4� 91/4� Increments Qty 13) Samchully JB-M312 First Spindle Samchully JB-M312 Second Spindle High Pressure Coolant both turrets and spindle flush Chip Blaster F2-60 WTO Rotary Tools: 48-107658-HP - O.D. Cutting Holder - (4 ea.) 48-107660 � Combination Tool Holder - (4 ea.) 48-100204 � Cut-off Holder - (2 ea.) 48-102279R � Cut-off Holder Right - (2 ea.) 48-102279l � Cut-off Holder Left - (2 ea.) 420132020 � Straight Drill/Milling Unit, ER32 QF, IC-EC - (4 ea.) 420132019-65 � Straight Drill/Milling Unit, ER32 QF, EC - (4 ea.) 420532026-65 � Face Mill/ Drill Unit, ER32 QF, IC-EC - (4 ea.) 420532025-65 � Face Mill/ Drill Unit, ER32 QF, EC - (4 ea.) 410120030-65 � Straight Offset Drill/Milling Unit, ER32, EC - (4 ea.) 420532043-65 � Right Angle Drill/Milling Unit, Both Sides, ER32 QF, EC - (4 ea.) 410120031-65 � Straight Offset Drill/Milling Unit, ER32, IC-EC - (4 ea.) 410113002-65 � Straight Offset Drill/Milling Unit, ER20, EC - (4 ea.) 410120023-65 � Straight Offset Drill/Milling Unit, ER32, EC - (4 ea.) 410113003-65 � Straight Offset Drill/Milling Unit, ER20, IC-EC - (4 ea.) 420225014-65 � Right Angle Drill/Milling Unit, ER25, EC - (4 ea.) 420525015-65 � Right Angle Drill/Milling Unit, ER25 QF, IC-EC - (4 ea.) 420532031-65 � Face Drill/Milling Unit, ER32 QF, EC - (4 ea.) 420532032-65 � Face Drill/Milling Unit, ER32 QF, IC-EC - (4 ea.) 411010000-65 � Adjustable Angle Drill/Milling Unit, ER16, EC - (2 ea.) 411010001-65 � Adjustable Angle Drill/Milling Unit, ER16, IC-EC - (2 ea.) 411007001-65 � Adjustable Angle Drill/Milling Unit, ER11, EC - (2 ea.) 411007000-65 � Adjustable Angle Drill/Milling Unit, ER11, EC - (2 ea.) 411500001-65 � Offset Slitting Saw Unit, Type 14-2 - (2 ea.) 414532003-65 � Broaching Unit, TN765050 - (1 ea.) Reduction Sleeve 1-1/2� (2 Sets) 2400150038 � 3/8� 2400150050 � 1/2� 2400150063 � 5/8� 2400150075 � 3/4� 2400150088 � 7/8� 2400150100 � 1.0� 2400150125 � 1-1/4� ER 11 Collets (2 Sets) 190011000 � (.276-.020) ER 16 Collets (2 Sets) 190016000 � (.394 -.020) ER 20 Collets (2 Sets) 190020000 � (.512-.039) ER 25 Collets (2 Sets) 190025000 � (.630-.039) ER 32 Collets (2 Sets) 190032000 � (.787-.079) ER 11 Collets Sealed (2 Sets) 191011013 � (.125) 191011019 � (.188) 191011025 � (.25) ER 16 Collets Sealed (2 Sets) 191016013 � (.125) 191016019 � (.188) 191016025 � (.25) 191016031 � (.313) 191016038 � (.375) ER 25 Collets Sealed (2 Sets) 191016013 � (.125) 191016019 � (.188) 191016025 � (.25) 191016031 � (.313) 191016038 � (.375) 191016044 � (.438) 191016050 � (.5) 191016056 � (.563) 191016063 � (.625) ER 32 Collets Sealed (2 Sets) 191032013 � (.125) 191032019 � (.188) 191032025 � (.25) 191032031 � (.313) 191032038 � (.375) 191032044 � (.438) 191032050 � (.5) 191032056 � (.563) 191032063 � (.625) 191032075 � (.75) Interchangeable Milling Arbors (2 Sets) 160015142 � (.625) 160019142 � (.75) 160023142 � (.875) 160025142 � (.1.0) ER 25 QF Collet Chuck Adapter (2 Sets) 320025010 � (ER16) 320025013 � (ER20) 320025016 � (ER25) ER 25 QF Collet Chuck Adapter Short (2 Sets) 320025010-07 � (ER16) 320025013-09 � (ER20) ER 25 QF Collet Chuck Adapter Long (2 Sets) 320025007-40 � (ER11) 320025010-50 � (ER16) ER 25 QF Weldon/Whistle Notch Shank Adapter (2 Sets) 3201250250 � (.25) 3201250312 � (.313) 3201250375 � (.375) 3201250500 � (.5) 3201250625 � (.625) 3201250750 � (.75) ER 25 QF Combination Mill Adapter (2 Sets) 3202250750 � (.075) 3202251000 � (.1.0) ER 25 QF Blank (5 ea.) 329025000 ER 25 QF Protection Cover (10 ea.) 337025000 ER 25 QF Master Gauge (1 ea.) 339125000 ER 32 QF Collet Chuck Adapter (2 Sets) 320032013 � (ER20) 320032016 � (ER25) 320032020 � (ER32) ER 32 QF Collet Chuck Adapter Short (2 Sets) 320032013-07 � (ER20) 320032016-07 � (ER25) ER 32 QF Collet Chuck Adapter Long (2 Sets) 320032007-50 � (ER11) 320032010-60 � (ER16) ER 32 QF Weldon/Whistle Notch Shank Adapter (2 Sets) 3201320250 � (.25) 3201320312 � (.313) 3201320375 � (.375) 3201320500 � (.5) 3201320625 � (.625) 3201320750 � (.75) ER 32 QF Combination Mill Adapter (2 Sets) 3202320750 � (.075) 3202321000 � (1.0) 3202321250 � (1.25) ER 32 QF Blank (5 ea.) 329032000 ER 32 QF Protection Cover (10 ea.) 337032000 ER 32 QF Master Gauge (1 ea.) 339132000 One Hand Wrenches/Sets 0067732000 (5 ea.) 0067725001 (5 ea.) 00675000958 (5 ea.) 00675000591 (5 ea.) 00675000515 (5 ea.) 00675000902 (5 ea.) 00675000914 (5 ea.) 00675000448 (5 ea.) Installation: Contractor shall provide personnel to oversee equipment assembly, installation, startup and test prior to equipment acceptance and commissioning. Calibration/ Setup: Contractor personnel shall perform all calibration, verification and performance testing of the equipment after installation and demonstration of proper operation prior to Government customer providing acceptance. Training: Contractor shall provide on-site orientation training for this equipment. NOTES � FANUC Brand Drives and Control are a must to coincide with current programming and minimize training. � WTO live Tooling is the current brand we use in the shop.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/workspace/contract/opp/3fe07107fa27453591f713f9554b9198/view)
- Place of Performance
- Address: McAlester, OK 74501, USA
- Zip Code: 74501
- Country: USA
- Zip Code: 74501
- Record
- SN07647412-F 20251122/251120230034 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |