General Services Administration ( 8PW ),Public Buildings Service,P. O. Box 2 5546,Denver,CO 80225-0546

C -- SUPPLEMENTAL A/E AND CM CONTRACT FOR SOL GS-08P-95-JDC-0004 DUE 022295 POC Contact,Kip Sheppard,303/236-7230,Contracting Officer,Marjorie C. Rosenquis t,303/236-7230 Supplemental A/E Services and Construction Management Services Contract for the states of Utah and Wyoming, but may also include services for projects within the states of Colorado, Montana, North Dakota, and South Dakota. Indefinite Delivery/Indefinite Quantity contract for A/E services for a period of one (1) year with four additional 1-year option periods. The firm selected will provide the following as primary services: Design, construction management and inspection, and estimating services. The key disciplines anticipated for the primary services include but are not limited to the following: Architectural, mechanical, electrical, civil, structural, geotechnical, environmental, as well as estimating and construction inspection. Secondary services may include related services such as scope development, planning, interior design, problem analysis, and design review, and various technical studies including, but not limited to evaluation of historic properties, engineering of existing (historic and non-historic) buildings, seismic and structural evaluation of existing buildings, evaluation of existing buildings for handicap accessibility (ADA/UFAS), identification and evaluation of potential energy conservation projects as well as energy studies/audits and design of energy upgrades, evaluation of existing roofs, preparation of design programs, and preparation of environmental impact assessments as well as familiarity with the the current state and federal regulations and ability to identify and complete acceptable design based options available for regulated substances such as asbestos, PCBs, CFCs, radon and lead based paint. Secondary services may also include specialized architectural/engineering or construction management and technical services related to industrial hygiene, fire safety, elevators, acoustics, security, surveying, geotechnical testing, quality control testing, asbestos sampling,hazard assessment,abatement design, air quality monitoring, boundary and topographical surveying, and other various types of testing, monitoring and quality checks as required to support the primary and secondary services for this contract. The minimum design fee contract amount awarded per the initial contract period (1 year) will be $25,000 and a $25,000 minimum for each option period, if exercised by the government. There will be no limit to the amount paid on individual work orders and no limit on the number of work orders issued; however, the total cumulative work order amount shall not exceed $750,000 in any one-year contract period for the initial period or for any optional periods exercised by the government. Projects will generally involve repairs, alterations and improvements in connection with existing buildings or properties, with the majority of delivery orders being issued for projects with an Estimated Cost of Construction at Award (ECCA) between $75,000 and $350,000. The following projects represent examples of typical design projects and their ECCA: Exterior cleaning and caulking, $75,000; exterior wall repairs, $50,000; replace fire alarm system, $40,000; replace fire alarm sprinkler system, $300,000; replace roof, $200,000; replace chiller, $250,000; resurface parking lot, $250,000; replace heating/cooling sytem, $500,000; replace windows, $100,000; upgrade controls, $250,000; install generator, $300,000; restroom accessibility improvement, $200,000; elevator repair and replacement, $300,000; interior space planning, $50,000. The firms responding, shall demonstrate conformance to the following four minimal requirements or will not be considered for selection: (1)Architectural- Engineers providing design services shall be licensed as a professional in at least one of the two states to be served (Utah and Wyoming). (2)Demonstrate the capability to provide study, design, and planning, management and inspection, estimating, and testing services with regard to PCBs, CFCs, lead based paint, radon, and asbestos related work. (Note: The Government will not indemnify the firm against liability involving asbestos or other hazardous materials.) (3)Demonstrate the capability to perform the projects in metric. (4)Demonstrate the capability to provide drawings compatible with AUTOCADD, version 12 as well as specifications in a word processing format in either Word 6.0 for Windows or WordPerfect software. (0019)

Loren Data Corp. http://www.ld.com (SYN# 0018 19950120\C-0003.SOL)