Westinghouse Electric Corporation, Bettis Atomic Power Laboratory, P.O. Box 79, 814 Pittsburgh-McKeesport Boulevard, West Mifflin, PA 15122-0079

Z -- MAINTENANCE ASPHALT PAVING SOL 73-KZ-762350. Contact Karen Zych, 412/476-7396. The scope of work for the Bettis-Pittsburgh Site 1995 Maintenance Paving contract includes the resurfacing of approximately 7,000 square yards of existing pavement, the replacement of approximately 2,200 square yards of existing pavement, the overlay of approximately 500 square yards of existing pavement, the installation of approximately 900 square yards of new pavement, the removal of 400 linear feet of existing curb, the replacement of approximately 3,400 linear feet of existing curb, the grading of two areas using soil and/or aggregate, the line striping of three areas, and 90 tons of pothole patching. Resurfacing efforts include the removal of 3-inches of existing pavement and installation of 3-inches of new pavement. Replacement efforts including approximately 100 square yards of new pavement installation require the removal of 13-inches of existing material, installation of 8-inchesof subbase and installation of 5-inches of new pavement. Overlaying efforts consist of the installation of 1-1/2 inches or more new pavement atop existing pavement. The remaining 800 square yards of pavement installation consists of the installation of 3-inches of new pavement atop existing grade. 1. All prospective bidder personnel must be U.S. citizens and complete appropriate access paperwork (Questionnaire for Uncleared Access-QUA) to attend the on-site pre-bid tour. Attendance at this meeting is essential for proper understanding of unique ingress/egress procedure and complex site conditions. Also, all vendor personnel accessing the Westinghouse-Bettis site to perform work must be U.S. citizens and any uncleared vendor personnel (i.e., currently not possessing active Department of Energy security clearances) accessing inside the Westinghouse-Bettis perimeter fence will be required to complete QUAs. In this regard, in order for your company to receive a copy of the RFQ package, completed QUAs for appropriate personnel must be submitted to Westinghouse within three (3) calendar days from the date of your request for a copy of the RFQ package. Westinghouse shall process access requests at no cost to the contractor; however, the effort to complete and submit QUAs is solely at the contractor's expense. 2. Prospective bidders must have bonding capability from sureties listed in the U.S. Treasury Circular 570 relative to contract performance or be able to provide irrevocable letters of credit from financial institutions that are Federally insured and have investment grade or higher rating from a recognized commercial rating service. 3. This is a small business set-aside action and all prospective bidders must certify they qualify as a small business. 4. Prospective bidders must agree to submit a current Foreign Ownership, Control or Influence Certification and all necessary supporting business and financial documentation, if requested by Westinghouse. Request for the RFQ along with the necessary documentation clearly showing your firm meets the above minimum prerequisites, must be in writing (telephone requests will not be honored), and your letter must be postmarked no later than fifteen calendar days after the date of this CBD publication. (052)

Loren Data Corp. http://www.ld.com (SYN# 0199 19950222\Z-0001.SOL)