Commander, USCG Maintenance & Logistics Command Atlantic (vpl) Bldg. 400 Section M, Governors Island, NY 10004-5085

J -- HOMEPIER DRYDOCK REPAIR USCGC PT FRANKLIN (WPB-82350) SOL DTCG80-95-B-3FA762. Contact Point, Douglas Landau, Contract Specialist, 212/668-3374, Contracting Officer, Douglas Landau 212/668-3374. Provide all labor, material and equipment necessary to provide dockside repairs including but not limited to the following items 1) Welding repairs 2) Crack repair (steel) 3) Crack Repair Aluminum 4) Flat Plate renewal (5.1# Steel) 5) Flat Plate renewal (7.6# Steel) 6) Shape Plate Renewal (7.6 Steel) 7) Flat Plate renewal (10.2# Steel) 8) Flat Plate Renewal (0.090'' aluminum) 9) Flat Plate Renewal (1/8'' aluminum) 10) Eroded Weld Renewal (steel) 11) Stud renewal (steel) 12) Overlay Welding (steel) 13) 3'' T-Bar (steel) 14) 4'' T-Bar (steel) 15) 2'' Flat Bar (steel) 16) 3'' Flat Bar (steel) 17) 4'' Flat Bar (steel) 18) 1'' Angle (steel) 19) 1-1/2'' Angle (steel) 20) 2'' Angle (steel) 21) 1-1/2'' Angle (aluminum) 22) 2'' Angle (aluminum) 23) Renew Bimetallic Transition Joint 24) Fabricate and Install rope Guards 25) Remove and Reinstall Caterpillar Propulsion Plant 26) Align Catepillar Main Engine 27) Remove, Inspect and Reinstall Propeller shaft 28) Renew Stern Tube 29) Renew Propeller Shaft Coupling 30) Renew Forward Strut Barrel continue Drydock Repair USCGC pt franklin: 31) Renew Shaft Covering 32) Straighten Shaft 33) Renew Water-Lubricated Shaft Bearings 34) renew AFT Strut Barrel 35) Renew Shaft Sleeve 36) Remove, Inspect and Reinstall Propeller 37) Minor Repair and recondition Propeller 38) Preserve the Transducer Hull Ring and Renew Depth Indicating Transducer 39) Overhaul, Renew, and Test Valves 40) 1.0 inch Waster Piece, (renew) 41) 1.5 inch Waster Piece, (renew) 42) 2.0 inch Waster Piece, (renew) 43) 2.5 inch Waster Piece, (renew) 44) 3.0 inch Waster Piece, (renew) 45) Modify Generator Sea Chest Suction Valves 46) Remove, Inspect, and Reinstall Rudder 47) Renew Upper Rudder Bearing Housing 48) Renew Rudder Port 49) Replace Sewage Tank Assembly and Tank Level Sensing System (Shipalt 82C-B127) 50) Preserve Main Hold Bilges 51) Clean Inspect Fuel Tanks 52) Clean and Inspect Diesel Fuel JP-5 Fuel, and Lube Oil Tanks 53) Remove, Dispose and Provide New Fuel Oil (1,000 gallons) 54) Remove, Dispose and Provide New Fuel Oil(200 gallons Units 55) Preserve Underwater Body 56) Coating System Thickness Measurements 57) Condition A (135 Sq feet) 58) Condition A (Entire U/W Body) 59) Condition B (135 sq feet) 60) Condition B (Entire U/W Body) 61) Condition C (135 sq feet) 62) Condition C (Entire U/W Body) 63)( Preserve Forward Peak Void 64) Preserve Freeboard 65) Clean, Inspect and Disinfect Potable Water Tanks 66) Preserve Galley/Crew's Mess Bilges 67) Preserve Sewage Void 68) Renew Corrosion Preventive Zinc Anodes 69) Provide Temporary Messing 70) Provide Breakfast 71) Provide Lunch 72) Provide Dinner 73) Provide Breakfast 74) Provide Lunch 75) Provide Dinner 76) Provide Temporary Berthing 77) Provide Temporary Berthing 78) Additional Temporary Berthing 79) Ultrasonic Testing 80) Single Shots (1-99 Shots) 81) 100 Shots Per Group 82) 500 Shots Per Group 83) Provide Temporary Logistics 84) Temporary Logistics 85) Additional Temporary Logistics 86) Routine Drydocking. Vessel Homepier is Cape May, NJ. Vessel Length is 82'. Vessel availability schedule is on or about 15 May 1995. There will be a non-refundable charge of $100.00 in the form of a money order or certified check made payable to The U.S. Coast Guard for requested drawings - publications. Orders must be placed within ten (20 days of solicitation issuance. The propose contract listed here is part of the Small Business Competitiveness Demonstration Program. All responsible sources may submit a Bid which shall be considered by The United States Coast Guard. For Minority, Women-Owned and Disadvantaged Business Enterprises: The Department of Transportation (DOT) Office of Small and Disadvantaged Business Utilization has programs to assist minority, women-owned and disadvantaged business enterprises to acquire Short-Term working capital and bonding assistance for transportation-related contracts. Loans are available under the DOT Short Term Lending Program (STLP) at prime interest rates up to $500,000 per contract to provide accounts receivable financing. The DOT Bonding Assistance Programs enables firms to apply for bid, DOT provides an 80 percent guaranty on the bond amount to a surety forms concerning the STLP and Bonding Assistance Program. Please call (800) 532-1169. (055)

Loren Data Corp. http://www.ld.com (SYN# 0058 19950228\J-0001.SOL)