Social Security Administration, Office of Acquisition and Grants, 1710 Gwynn Oak Avenue, Baltimore, MD 21207 Attn:/Stephen Slaughter

71 -- WALL OR PANEL MOUNTED ELECTRICALLY ADJUSTABLE WORKSURFACE POC Stephen Slaughter tel: (410) 965-9513/Allyson Y. Stokes (410) 965-3205 CNT NONE The Social Security Administration is in need of an electrically adjustable worksurface with the following specifications for possible use in reception counters in SSA field offices nationwide: The worksurface and adjusting mechanism must be systems panel hung or wall mounted. The worksurface must operate on a standard 110 volt electrical outlet. The electrical adjustment mechanism must be energy efficient and the control must be located so that it is easily reached by the user. The control switch must be so designed as not to pose a safety problem during activation. Adjustable worksurfaces shall have a clearance of 40.1 cm (15.8'') deep at worksurface height (knee room) and 59.6 cm (23.5'') deep at the floor (toe room). Neither the worksurface support(s) nor the adjustment mechanism shall interfere with the user's knee, leg or foot space. The adjustable worksurface support shall not pose a threat to the user's knees while moving from one worksurface to another. The adjustability range of the worksurface shall be from a minimum of 66 cm (26'') high to a maximum of 101.6 cm (40'') high. The worksurface must be able to support a functional workload of 150 pounds regardless of size. The worksurface itself must be constructed of at least 45 pound density particle board encased in high pressure, matte finish, wood grain laminate. The worksurface must be at least 3.8 cm (1.5'') thick with all edges rounded. The typical worksurface will be 177.8 cm (70'') wide by 85.1 cm (33.5'') deep with an elliptical curve cut out of one side of the front edge making the narrowest depth 59.7 cm (23.5'') (Similar to the Herman Miller Liaison worksurface #S62572.01). However, the manufacturer must be able to provide custom shaped worksurfaces as required. This is a request for vendor product information and not a Request For Proposal (RFP) or an Invitation For Bids (IFB). Interested parties who can furnish the required wall or panel mounted electrically adjustable worksurface are invited to submit in writing an appropriate capability statement. Interested parties shall also furnish the complete name, address, contact person and telephone number of at least one (1) reference. The information respondents provide shall pertain to the synopsis only; cross-referencing to material previously submitted is not recommended. No cost or pricing data is required or requested. The Government does not intend to pay for the information solicited or received. Respondents will not be notified of the results of the evaluation of the capability statement received, but sources deemed qualified will be solicited if Invitation For Bids or Requests For Proposals are issued. Any interested organizations must submit appropriate capability statements in 2 copies within 15 calendar days of this announcement. All responsible sources may submit a capability statement which shall be considered by the agency. (0094)

Loren Data Corp. http://www.ld.com (SYN# 0420 19950405\71-0001.SOL)