Sacramento Alc/Pkxd, 3237 Peacekeeper Way/Suite 17, Mc Clellan Air Force Base Ca 95652-1060

59 -- ALUMINUM CARRYING CASES SOL F04699-95-R-0071 DUE 052695 POC For copy, contact the info office indicated., For additional information contact Gamboa.K8g/Pkocc/916-643-4238 Item 0001 NSN 5975-P2-1-1-02034 Acquisition of Aluminum Carrying Cases for Electronic Equipment. 240 each, cases. General case specifications as follows: All cases shall be of all aluminum deep drawn construction. All cases shall have automatic pressure equalization valves. Continuous mating gasketed openings capable of pressure seal in order to prevent moisture intrusion in all types of environments. Finish interior and exterior except handle grips, valve and label, wash prime per DOD-P-15328, epoxy primer per MIL-P-23377, Type 1, Class 1, paint aliphatic polyurethane camouflage coating per MIL-C-46168 ''CARC'' color No. 383, (Exterior Only). Each case in final configuration must provide a maximum carrying weight not-to-exceed a two man lift of 84 lbs including the equipment per case. Zero Manufacturing Part Number 21-102034, or equal, 80 each, detailed specifications as follows: SEE BELOW FOR CONTINUATION OF DESCRIPTION. 240ea. Destn: Mc Clellan Air Force Base Ca 95652-1060. Item 0002 17. Case requires an internal shock mounted rack capable of protecting a 65 lb piece of electronic equipment which will withstand up to a 15g drop. The internal shock mounted rack installed within this case shall accept standard 19'' rack mount equipment. The rack will be attached to the case with shock mounts at all eight corners. Case dimensions are as follows: outside 16.5'' high X 23.75'' wide X 23'' deep -0'' + 2.'' Carrying handles will be installed on opposite sides of the 23'' dimension. This case shall have front and back removable covers to provide access to the front panel and rear connector panels of the enclosed equipment. Covers shall be 4.5'' deep to provide clearance for internal equipment. Zero Manufacturing Part Number 21-102035, or equal, 80 each, detailed specifications as follows: Case requires internal shock mounted rack capable of protecting a 20 lb piece of electronic equipment which will withstand up to a 15g drop. Internal shock mounted rack installed within this case shall accept standard 19'' rack mount equipment. The rack will be attached to the case with shock mounts at all eight corners. Case dimensions are as follows: 18.25'' high X 23.75'' wide X 19'' deep -0'' + 2.'' Carrying handles will be installed on opposite sides of the 19'' dimension. This case shall have front and back removable covers to provide access to the front panel and rear connector panels of the enclosed equipment. Rear cover will have a hinged inner lid to provide a 3'' deep cable storage compartment. This lid shall be secured with push button latches. Part Number 21-102035, or equal, and Part Number 21-102034, or equal, shall stack one upon the other with Part Number 21-102035, or equal, on top of Part Number 21-102034, or equal, on the bottom, which provides for both to be locked together for use as a test stand with covers removed to allow the operator to connect and operate equipment at each deployment site. Cases shall be unlatched and separated and covers replaced for shipment with equipment for redeployment. Zero Manufacturing Part Number 21-102036, or equal, 80 each, detailed specifications as follows: This case shall serve as a transport case. Case dimensions are as follows: outside 15'' high X 28.25'' wide X 28.25'' deep -0'' + 1.'' Carrying handles will be installed on opposite sides of the 28.25'' dimension. This case shall have a removable 3'' deep lid. The lid shall have 3'' high density polyurethane foam. The bottom portion of this container shall be filled with high density diced foam approximately 1'' to allow for a custom fit of the support equipment to be transported in this container. Delivery Schedule for these items shall be as follows: 5 sets of these containers/enclosures 12 weeks ARO, thereafter 5 sets per week until completion. A set consists of the following: 1 each Part Number 21- 102034, or equal, 1 each Part Number 21-102035, or equal and 1 each Part Number 21-102036, or equal. Each proposal shall contain an engineering drawing package which at the time of acceptance shall become the property of the U.S. Government. This is an ''all or none'' requirement. Descriptions, quantities, locations are based on the best available data at the time. Actual solicitation requirements may differ. The specific agency delegation number for this acquisition is KMA 93-AD15. An Ombudsman has been established for this acquisition. The only purpose of the Ombudsman is to receive and communicate serious concerns from potential offerors when an offeror prefers not to use established channels to communicate his/her concern during the proposal development phase of this acquisition. Potential offerors should use established channels to request information, pose questions and voice concerns before resorting to use of the Ombudsman. Potential offerors are invited to contact Allen Taylor at 916-643-5209, with serious concerns only. Routine communications concerning this acquisition should be directed to the buyer listed elsewhere in this synopsis. All responsible sources may submit a proposal/quotation which shall be considered by the agency. When requesting a solicitation, provide information as to whether your organization (together with its affiliates) is a large or small business and whether it is a small disadvantaged business. Written responses only, verbal requests will not be honored. FAX number is 916-643-4157. (0101)

Loren Data Corp. http://www.ld.com (SYN# 0340 19950412\59-0001.SOL)