FISC NORFOLK, DETACHMENT PHILADELPHIA, BLDG. 600, PHILADELPHIA NAVAL BASE, PHILADELPHIA, PA 19112-5088

66 -- HYDRAULIC SLIP TABLE. SOL N00140-95-R-2347 SYN 317 DUE 060795 POC Contact Point, David Henry, (215)897-5437, Contracting Officer, H. R. Aldridge, (215)897-5437 Hydraulic Slip Table, 1 each, for performing longitudinal and transverse vibration and shock testing on complex structures. Specifications: Magnesium slip plate working surface 4' W X 5' L X 2'' thick. Stainless steel inserts installed on 4'' X 8'' grid no hole center closer than 2'' to side; 1/2 13UNC-38 thread; six (6) extra inserts with installation tool required. Slip table usable stroke at least 2.5'' with markings indicating center and extreme stroke positions. Minimum 9 Hydraulic bearings under slip plate located at each corner and at center of plate; full oil film support; performance in temperature range of -70 to 180 F. Hydraulic power supply attached to seismic base to deliver clean, filtered, hydraulic oil at pressure to hydraulic bearings and oil film support; power supply automatic shut off and alarm; 120V, 60Hz, 1 phase power supply; average 20 amps; 50' electrical line; one (1) extra oil filter and necessary hydraulic oil for first service change required. Seismic base with leveling feet secured to a T-slotted base plate manufactured by Lake Shore Inc., Model # E14042, bolt down holes interfacing with base plate, and hoisting provisions. Magnesium Drive bar for shaker armature stiffness attached to Unholtz-Dickie T-1000 shaker and magnesium slip plate; transmissibility 1:1; screws required. Phenolic Thermal Barrier bolt pattern 4' W X 5' L X 1/2'' thick attach to slip plate. Moment Control for heavy loads pitch and roll no less than 2.5 X 10^6 in-lb; yaw control no less than 5 X 10 5^in-lb. Assembly expandable for second slip table in one configuation; end to end attachment to increase slip table length; second configuration tables side to side; side configuration for two (2) shaker test setup; information to be provided by contractor. Two (2) sets Operation and Maintenance Manuals providing operating instructions, maintenance schedules and procedures for each component. 12 month Warranty. Initial inspection at origin, final inspection and Acceptance at Destination NWS Earle, Colts Neck, NJ. All responsible sources may submit a proposal which shall be considered by FISC. Requests for solicitations should be made by letter or telegram directed to FISC Norfolk, Det. Philadelphia, Code 0343C. FAX # 215/897-5325. The applicable Standard Industrial Classification number is 3823. SYN # 317. (0108)

Loren Data Corp. http://www.ld.com (SYN# 0441 19950419\66-0001.SOL)