AFFTC/PKAD Directorate of Contracting, 5 S. Wolfe Ave, Edwards AFB, CA93524-1185

59 -- PATCH PANEL SYSTEM SOL F04700-95-B-0015 DUE 062095 POC Donna Chesher, Contract Specialist, (805)277-3900, Ext. 2255; John C. Lemacks, Contracting Officer, (805)277-3900, Ext. 2253. Phillips Laboratory has a requirement for patch panel components as follows: Item 0001, 3 each receivers, patchboard, Virginia Panel PN 093264DB4GA or equal, 3264 gold plated contacts, holds patchboard by quick-release device, mounts in standard 19'' rack. This receiver will be constructed in such a way that will allow 3264 incoming wires to be individually constructed and accessed. Each individual incoming wire will be terminated by means of a pin. Each pin will then be inserted into its own individual contact in the receiver. The contacts in the receiver must then mate with patchcords which will interconnect one wire or group of wires with another. The contacts must be gold plated. The receiver must accept a patchboard and hold it securely in place by means of a lever or other quick-release device. This unit will be rack mountable in standard 19'' rack. Nominal dimensions are 23''H x 17 3/4'' W x 3 1/4'' D. Item 0002, 7 each patchboards Virginia Panel PN 093264DC00A or equal, 3264 contacts, clear anodized finish. This unit's function is to hold patchcords in such a way as to align them with the individual contacts on patchboard receiver. The patchboard will mate with the patchboard receiver in such a way as to firmly hold the patchcords in contact with the receiver contacts. This patchboard will have 3264 mating holds, one for each of the contacts on the mating patchboard receiver. Nominal dimensions: 21''H x 15 1/4''W x 1 1/4''D (not including handle). Item 0003, 2 each receivers Virginia Panel PN 094896DB4GA or equal, 4896 gold plated contacts, holds patchboard by quick-release device, mounts in standard 19'' rack. This unit's function is to terminate wiring into one centralized panel that will allow access to each individual wire for the purpose of connecting any single wire with any other single wire, or any group of wires with any other group of wires. This receiver will be constructed in such a way that will allow 4896 incoming wires to be individually connected and accessed. Each individual incoming wire will be terminated by means of a pin. Each pin will then be inserted into its own individual contact in the receiver. The contacts in the receiver must then mate with patchcords which will interconnect one wire or group of wires with another. The contacts must be gold plated. The receiver must accept a patchboard and hold it securely in place by means of a lever or other quick-release device. This unit will be rack mountable in a standard 19'' rack. Nominal dimensions are 33 1/2''H X 17 3/4''W X 3 1/4''D. Item 0004, 4 each patchboards Virignia Panel PN 094896DC00A or equal, 4896 contacts, clear anodized finish. This unit's function is to hold patchcords in such a way as to align them with the individual contacts on patchboard receiver. The patchboard will mate with the patchboard receiver in such a way as to firmly hold the patchcords in contact with the receiver contacts. This patchboard will have 4896 mating holds, one for each of the contacts on the mating patchboard receiver. Nominal dimensions 31 1/4''H X 15 1/4''W X 1 1/4''D (not includig handle). Item 0005, 22,500 each locktite terminals Virginia Panel PN 610112103 or equal, gold plated, 18-20 gauge, .053 diameter. A loctite terminal's function shall be to attach a single instrumentation wire to a single contact on the patchboard receiver. Each individual instrumentation wire shall terminate into one loctite terminal. Once terminated, it shall then be inserted into one contact in the rear of the patchboard receiver. It will thereby provide a signal patch from the wire, through the loctite terminal, and then to its respective patchboard receiver contact. Each loctite terminal must be gold plated. Delivery to be 120 days ARO. SIC Code 3613, size standard 750 employees. Fax requests for this solicitation will be accepted (805) 277-2409. All responsible sources may submit a bid, proposal or quotation which shall be considered. Telephone requests to be placed on the mailing list will not be honored. (0110)

Loren Data Corp. http://www.ld.com (SYN# 0348 19950421\59-0001.SOL)