|
COMMERCE BUSINESS DAILY ISSUE OF MAY 3,1995 PSA#1338NASA, George C. Marshall Space Flight Center, Procurement Office,
Marshall Space Flight Center, AL 35812 80 -- ADHESIVES SOL 8-P-5-21-37388 POC GP26T/Janice M. Stewart,
205-544-6093, or GP25A/Teresa A. Foley, Contracting Officer NASA/MSFC
plans to issue a Request for Offer (RFO) for the following: Item 1 --
Adhesive Catalyst, EC-2216 Part A (Translucent Form) in 55 gallon metal
food grade drum with bung hold in the top closure -- During
manufacture, drum shall be filled through bung hole to prevent the
introduction of contamination. -- Material shall be filtered to 10
micron before pumping into drums -- Material shall have the following
properties: Weight-8.0 to 8.4 lb/gal -- Viscosity-5000 to 9000 cp --
The properties of the mixed adhesive shall have a minimum average
overlap shear strength at 75 degrees F of 1200 psi and a minimum
average T-peel strength at 75 degrees F of 25 lb/inch width -- At least
70% of shelf life must remain upon receipt -- Provide MSDS sheets,
Certificate of Compliance and Test report; quantity 10, unit 55 gallon
-- Item 2 -- Adhesive Resin, EC-2216 Part B (Translucent Form) in 55
gallon metal food grade drum with bung hole in the top closure --
During manufacture, drums shall be filled through bung hole to prevent
the introduction of contamination -- Material shall be filtered to 10
micron before pumping into drums -- Material shall have the following
properties: Weight-9.4 to 9.8 lb/gal -- Viscosity-11000 to 15000 cp --
The properties of the mixed adhesive shall have a minimum average
overlap shear strength at 75 degrees F of 1200 psi and a minimum
average T-peel strength at 75 degrees F of 25 lb/inch width -- At least
70% of shelf life must remain upon receipt -- Provide MSDS Sheets,
Certificate of Compliance and Test Report -- Item 3 -- A Material
Safety Data Sheet must be provided for items 1 and 2 -- This
procurement is being conducted under the NASA/MSFC MidRange Pilot Test
Program approved by the Office of Federal Procurement Policy on April
16, 1993 -- Requests for copies of the RFO must be submitted in
writing -- Transmission by facsimile to 205- 544-9080 or by Internet
e-mail to janice.stewart@msfc.nasa.gov is acceptable -- RFO will be
released on or about 15 days after publication in the Commerce Business
Daily (CBD) -- Firm date for receipt of offers will be stated in the
RFO -- This procurement is a total small business set-aside -- All
responsible business sources may submit an offer which shall be
considered by the agency -- The solicitation and any related documents
to this procurement will be available over the Internet -- These
documents will be in ASCII format and reside on a World-Wide Web (WWW)
server, which may be accessed using client browsers, such as, MOSAIC
-- The WWW address, or URL, of the MSFC Procurement home page is:
''http://procure.msfc.nasa.gov''. (0121) Loren Data Corp. http://www.ld.com (SYN# 0380 19950502\80-0001.SOL)
80 - Brushes, Paints, Sealers and Adhesives Index Page
|
|