Arnold Engineering Development Center, ATTN: AEDC PKP, 100 Kindel Drive, Suite A332, Arnold AFB, TN 37389-1332

47 -- ASME SLIP-ON FLANGES SOL F40650-95-B-0059 DUE 073195 POC Kimberly M. Williams, Contract Specialist, (615)454-5174, W. Richard Stewart, Contracting Officer. This requirement is for several large 304L stainless steel ASME slip-on type flanges. Two flanges with an inside diameter of 150 inches, an outside diameter of 161 inches, a bolt circle of 158 inches, 72 bolt holes of 1.3 inches in diameter, and a flange thickness of 3 inches. Two flanges with an inside diameter of 72 inches, an outside diameter of 83 inches, a bolt circle of 81 inches, 72 bolt holes of 0.875 inches in diameter, and a flange thickness of 2 inches. One flange with an inside diameter of 72 inches, and outside diameter of 99 inches, a bolt circle of 95.5 inches, 56 bolt holes of 1.6 inches in diameter, and a flange thickness of 3 inches. One flange with an inside diameter of 84 inches, an outside diameter of 99 inches, a bolt circle of 95.5 inches, 56 bolt holes of 1.6 inches in diameter, and a flange thickness of 2.5 inches. Delivery is to be FOB Arnold AFB TN and is required by November 1, 1995. (0166)

Loren Data Corp. http://www.ld.com (SYN# 0332 19950616\47-0004.SOL)