AFFTC/PKAD Directorate of Contracting, 5 S. Wolfe Ave, Edwards AFB, CA93524-1185

47 -- FABRICATION OF STAINLESS AND CARBON STEEL PIPE SPOOLS OF VARIOUS SI ZES PHILLIPS LABORATORY, EDWARDS AFB, CA SOL F04700-95-R0029 DUE 093095 POC Ricardo R. Mones, Contract Specialist, (805) 277-3900 Ext 2317. The Air Force Flight Test Center has a requirement for the fabrication of pipe spools for a test stand at Phillips Laboratory, Edwards AFB, CA. Projected requirement is approximately 30,000 linear feet of pipe. Pipe spools shall be fabricated from pipe sizes ranging from 1'' to 14'' in diameter. Pipe wall size ranges from Schedule 5 to Schedule XX Strong, including some special heavy wall thicknesses. Pipe material will be ASTM A106 GR. B, ASTM A312 TP 304, ASTM A 312 TP316, and ASTM A53 GR. B. Pipe spools may contain elbow flanges, couplings, reducers, tees, elbows, and pulled bends. All piping shall be fabricated in accordance with ASME B31.3 standards. All pipes that are identified to be subjected to 3,000 PSI or greater will require 100% radiography of all welds. The pipe spools will be fabricated, inspected, cleaned internally and packaged for shipment to Edwards AFB. Drawings and specifications required for fabrication will be included in the solicitation document. Interested contractors must be able to demonstrate technical experience in the fabrication of a similar requirement. This procurement is very rigid as to material specification and drawing compliance and awardee shall be subjected to on-site inspection by Government representatives prior to contract award and after contract award during production. This requirement is 100% set aside for small business. SIC Code 3498; size standard 500 employees. FAX request for the solicitation will be accepted; FAX number is (805)277-2409. Telephone requests to be placed on the mailing list will not be honored. See Numbered Note(s): 1. (0173)

Loren Data Corp. http://www.ld.com (SYN# 0363 19950623\47-0002.SOL)