Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF AUGUST 31,1995 PSA#1422

MILITARY SPECIFICATIONS AND STANDARDS PROPOSED CANCELLATION. In response to acquisition reform initiatives, the Defense Standards Improvement Council tasked activities responsible for preparing and maintaining military specifications and standsards to closely review their documents and propose dispositions. The following is a list of military standards these activities indicated should be canceled. Objections to the cancellation of any of these documents should be sent to Ms. Trudie Williams in the Defense Standardization Program Division, 5203 Leesburg Pike, Suite 1403, Falls Church, Virginia 22041 by September 29, 1995. Doc Num: MIL-STD-12D Truncated Title: Abbreviations for Use on Drawings, Specifications Standards & in Technical Documents. MIL-STD-14A: Architectural Symbols. MIL-STD-15/2 NOT 1: Electrical Wiring Equipment Symbols for Ships' Plans Part 2. MIL-STD-17A(1): Mechanical Symbols. MIL-STD-17/1B(1): Mechanical Symbols. MIL-STD-29A: Spring, Mechanical, Drawing Requirements for. MIL-STD-102B: Anti-Friction Bearing Identification Code. MIL-STD-168B NOT 1: Visual Inspection Guide for All-Rubber Gloves Except Surgical. MIL-STD-172C NOT 1: Color Code for Containers of Liquid Propellants. MIL-STD-178A NOT 1: Definition Applicable to Speed-Governing of Electric Generator Set. MIL-STD-187/310: Standards for Long Haul Communications Switching Planning Standards for the Defense Communication. MIL-STD-187/320: Standards for Long Haul Communications Transmission Planning Standards for the Defense Communication. MIL-STD-188/100(3): Common Long Haul and Tactical Communication System Technical Standards. MIL-STD-188/194: Integrated Services Digital Network Profile. MIL-STD-188/318: System & Subsystem Design & Engineering & Equipment Technical Standards for Closed Circuit TV. MIL-STD-188/331: Interoperability and Performance Standard for Video Teleconferencing. MIL-STD-188/340(1): Equipment Technical Design Standards for Voice Orderwire Multiplex. MIL-STD-188/342: Standards for Long Haul Communications Equipment Technical Design Standards for Voice Frequency. MIL-STD-190C: Identifications Marking of Rubber Products. MIL-STD-195(1) NOT 2: Marking of Connections for Electric Assemblies. MIL-STD-200K(1): Electron Tube Selection of. MIL-STD-205 NOT 1: Frequencies for Electric Power. MIL-STD-242/1H: Electronic Equipment Parts Selected Standards Synchros, Blowers, and Acoustical (PART 1). MIL-STD-242/2H NOT 1: Electronic Equipment Parts Selected Standards Crystals, Delay Lines, Coils, and Transformers. MIL-STD-242/3H NOT 2: Electronic Equipment Parts Selected Standards Resistors (Part 3). MIL-STD-242/4G NOT 1: Electronic Equipment Parts, selected Standards for Capacitors (Part 4). MIL_STD-242/7G NOT 1: Electronic Equipment Parts, selected Standards-Switches. MIL-STD-242/9J: Electronic Equipment Parts Selected Standards Circuit Breakers, Fuses, Lamps, & Meters (Part 9). MIL-STD-255B: Electric Voltages Alternating and Direct Current. MIL-STD-277(1): Static Acceptance Test for Light Output of Flash Munitions. MIL-STD-284A: Visual Inspection Guide for Rubber Footwear. MIL-STD-295: Bill of Material Preparation of. MIL-STD-372 NOT 1: Welding, Gas Metal-Arc and Gas Tungsten-Arc, Aluminum Alloys, Readily Weldable for Structures. DOD-STD-396: Weapon Caliber and Ammunition, Metric System for Identification of. MIL-STD-417A NOT 3: Classification System and Tests for Solid Elastomeric Materials. MIL-STD-606A: Helmet Welders'; Shield, Welding, Hand Held and Lenses, Helmet. MIL-STD-627A: Sprocket Wheels for Power Transmission and Conveying Chains. MIL-STD-645B NOT 1: Dip Brazing of Aluminum Alloy. MIL-STD-670B NOT 1: Classification System and Tests for Cellular Elastomeric Materials. MIL-STD-708: Formula for Binder Solution. MIL-STD-717 NOT 1: Formula for Binder Solution II. MIL-STD-725A(1) NOT 4: Method of Marking Scales for Sights and Fire Control Instruments. MIL-STD-731A(1): Quality of Wood Members for Containers and Pallets. MIL-STD-739A(1): Trailer and Semitrailers, Commercial. MIL-STD-771C NOT 1: Damage Control Books for Auxiliary and Miscellaneous Ships, Preparation for. MIL-STD-772C(1): Damage Control Books for Warships and Miscellaneous Large Ships, Preparation of. MIL-STD-782D NOT 1: Reconnaissance/Mapping Data Making. MIL-STD-783D: Legends for Use in Aircrew Stations and on Airborne Equipment. MIL-STD-787: Joint Optical Range Instrumentation Type Designation System. MIL-STD-850B NOT 1: Aircrew Station Vision Requirement for Military Aircraft. MIL-STD-858: Testing Standard for Personnel Parachutes. MIL-STD-872(1): Test Requirements and Procedues for Aircraft Emergency Ground and Ditching Escape Provisions. MIL-STD-877(1) Antenna Subsystem, Airborne, Criteria for Design and Location of. MIL-STD-908: Provisions for Evaluating the Quality of Spare Parts for Mechanical & Textile End Items. MIL-STD-912: Physical Ear Noise Attenuation Testing. MIL-STD-964(1): Manufacture and Packaging of Drugs, Pharmaceuticals and Biological Products. MIL-STD-1005 NOT 1: Renovation, Cleaning and Glazing of Bake Pans. MIL-STD-1163: Lithographic Chemicals. MIL-STD-1169B NOT 1: Packaging, Packing and Marking for Shipment of Inert Ammunition Components. MIL-STD-1201C: Ethyl Alcohol (Ethanol), Technical and Denatured Grades. MIL-STD-1210B: Fog an Ice Preventive Compounds. MIL-STD-1212A: Industrial Safety Belts, Straps, and Related Equipment. MIL-STD-1215B: Water Purification Compounds. MIL-STD-1216A: Preventive Compounds (Corrosion) and Inhibitors. MIL-STD-1221B: Protective Compounds (For Personnel). MIL-STD-1226A NOT 1: Engine, Gas, Air Cooled, Ind Type, 1-1/2 BHP MILSTD, Model 1A08 Install Procedures. MIL-STD-1227B(1) NOT 2: Engine, Gasoline, Air-cooled, 3 BHP, 4-Cycle, Military Design, Model 2A016. Installation Procedures. MIL-STD-1252: Inertia Friction Welding Process, Procedure and Performance Qualification. MIL-STD-1256A(1): Rubber Coated Parts for Machine Gun, 7.62MM, M60. MIL-STD-1258 NOT 1: Chromium Plated 5,56MM, 7.62MM, and Caliber .30 Small Arms Barrel Bores. MIL-STD-1261C(1): Arc Welding Procedures for Constructional Steels. MIL-STD-1267 NOT 1: Dimensioning of Barrel Chambers of Small Arms Weapons. MIL-STD-1270A(1): Patching of Wood Stocks for The 7.62MM, M14 and M14E2 Rifles. MIL-STD-1272A: Door Hardware, Vehicular. MIL-STD-1278 NOT 2: filters, Light, Photographic. MIL-STD-1281: Internal Transient Control for Solid State Power Supplies. MIL-STD-1285B: Marking of Electrical and Electronic Parts. MIL-STD-1306A: Fluerics Terminology and Symbols. MIL-STD-1343: Glossary of Terms For Electronic and Weapons Control Interface Functions (Naval Ship Combat Systems). MIL-STD-1348: Knob, Control Selection of. MIL-STD-1353B(4) NOT 4: Electrical Connectors, Plug-In Sockets and Associated Hardware, Selection and Use of. MIL-STD-1361A: Fluidics Test Methods and Instrumentation. DOD-STD-1371B: Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs. MIL-STD-1372A(1): Process for Soldering Accident Dosimeter to Film Badge Holder for Radiac Detecting Element. MIL-STD-1373(4): Screw-Thread, Modified, 60 Deg. Stub, Double. MIL-STD-1399/102A: Interface Standard for Shipboard Systems Section 102 Low Pressure Dry Air Service For Surface. MIL-STD-1399/105 NOT 1: Interface Standard for Shipboard Systems Section 105 Sea Water Service for Surface Ships. MIL-STD-1399/1068: Interface Standard for Shipboard Systems Section 106 Compressed Air Service for Surface Ships. DOD-STD-1399/204A: Interface Standard For Shipboard Section 204A Ambient Air Conditions in Surface Ship. DOD-STD-1399/533 (1) NOT 1: Interface Standard For Shipboard Systems Section 533 Potable Water Service (Metric). MIL-STD-1399/534(1) NOT 2: Interface Standard For Shipboard Systems Section 534 Auxiliary Steam Service, Surface Ships. MIL-STD-1401(1): Engine Gasoline, Air Cooled, 20 BHP, 4 Cycle, Military Design, Model 4A084 Installation Procedures. MIL-STD-1402(1) NOT 2: Engine, Gasoline, Air Cooled, 20 BHP, 4 Cycle, Military Design, Model 4A084 Installation Procedures. MIL-STD-1410A: Methods for Selection of Industrial Engines for End Item Application. MIL-STD-1422A: Mask, Chemical Biological. MIL-STD-1424: Hydrogen Ion Meters. MIL-STD-1427A: Activated Desiccants (Metric). MIL-STD-1433B: Climber Sets, Tree and Pole. MIL-STD-1434A: Goggles (Metric). MIL-STD-1439 NOT 1: Thickened Hydrocarbon Flame Fuels, Consistency of, Mobilometer Test. MIL-STD-1440A: Test Facility for Determining Percent Agent Recovery. MIL-STD-1442A: Inorganic Peroxides, Technical Grade. MIL-STD-1453: Ballistic Standards and Test Method for Evaluating and Selecting 5.56MM Ammunition for M16/M1. MIL-STD-1478: Task Performance Analysis. MIL-STD-1493: Contractual Service Requirements for Automatic Dishwashing Machine Accessory Equipment and Supplies. MIL-STD-1529(1): Vendor Substantiation for Aerospace Propulsion System Items. MIL-STD-1549A: Common Termination System for Electrical and Electronic Parts. MIL-STD-1555 NOT 1: Aircrew Station Displays and Associated Equipment, Definitions of. MIL-STD-1592 NOT 1: Mockups, Air Vehicle Engines, Construction & Inspection of. MIL-STD-1598: Studs Preferred For Design, Listing of. MIL-STD-1606A: Technical Information Requirements for Air Launched Guided Missile Proposals. MIL-STD-1621A NOT 1: Acoustical and Vibrational Standard Reference Quantities. MIL-STD-16348 NOT 3: Module Descriptions for the Standard Electronic Modules Program. MIL-STD-1646B: Servicing Tools for Electric Contracts and Connections, Selection and Use of. MIL-STD-1648A NOT 1: Criteria & Test Procedure for Ordinance Exposed to an Aircraft Fuel Fire. MIL-STD-1653A NOT 1: Power Cable Assemblies. MIL-STD-1659: Sealing Condition of Ammunition Primer Tube Flash Holes. MIL-STD-1671 NOT 1: Schematic Wiring Diagram (External DC Power Connector, Aircraft). MIL-STD-1681: Fabrication, Welding, And Inspection of HY-130 Submarine Hull. MIL-STD-1695: Environments, Working, Minimum Standards for. MIL-STD-1761 NOT 1: Fastener Recess Test, Method For Damage Tolerance Evaluation. MIL-STD-1774 NOT 1: Process For Cleaning Hydrazine Systems and Components. MIL-STD-1775 NOT 1: Propellant, Hydrazine-Uns-Dimethylhydrazine 50/50 Blend. MIL-STD-1777: Internet Protocol. MIL-STD-1778 NOT 1: Transmission Control Protocol. MIL-STD-1780: File Transfer Protocol. MIL-STD-1781: Simple Mail Transfer Protocol. MIL-STD-1782: Telnet Protocol. MIL-STD-1788A: Avionics Interface Design Standard. MIL-STD-1801: User/Computer Interface (Controlled Distribution). MIL-STD-1816: Preservation, Packaging, and Packing of Rubber and Nylon Fuel, Oil, and Water-Alcohol Cells. MIL-STD-1819: Performance Evaluation For Plasma Spray Masking Tape. MIL-STD-1875: Ultrasonic Inspection, Requirements for. MIL-STD-1907(1): Inspection, Liquid Penetrant And Magnetic Particle, Soundness, Requirements for Materials, Parts, and Weldments. MIL-STD-1946A(2): Welding of Aluminum Alloy Armor. DOD-STD-2003(1) NOT: Electric Plant Installation Standard Methods for Surface Ship and Submarine (Controlled Dist). MIL-STD-2065: Test Methods for Still Photographic Equipment (Less Optics). MIL-STD-2072: Survivability, Aircraft, Establishment and Conduct of Programs for. MIL-STD-2076 NOT 1: Unit Under Test Compatibility With Automatic Test Equipment General Requirements for. MIL-STD-2078: Requirement for Preparation of Support Equipment Depot Level Rework Standards. MIL-STD-2081 NOT 1: Assembly Procedures, Gimbal. MIL-STD-2082A(1) NOT 1: Assembly Procedures, Gyro. MIL-STD-2094 NOT 1: Missile Guidance Set, Aim/Rim-7M, First Article Tests. MIL-STD-2095 NOT1: Missile Guidance Set, Aim/Rim-7M, Production Verification Test. MIL-STD-2114: Electro Acoustical, Mechanical and Environmental Test Methods for Audio or Acoustical Component Parts. MIL-STD-2120 NOT 1: Connectors, Electromagnetic Interference (EMI) Filter Contact. MIL-STD-2126A: Reduced Smoke Rocket Motor Processing & Test Procedures (Sidewinder). DOD-STD-2144 NOT 1: Induction Clutches, Low Magnetic Field Design of (Metric). MIL-STD-2149A(1): Standard Procedures for Explosion Testing Ferrous and Non-Ferrous Metallic Materials and Weldments. MIL-STD-2172 NOT 1: Aeronautical Equipment Service Record. MIL-STD-2189-302-1: Design Methods for Naval ShipBoard Systems Section 302-1 AC Motor and Controller Application. MIL-STD-2189-305-1: Design Methods for Naval ShipBoard Systems Section 305-1 Designation and Marking of Electric System. MIL-STD-2189-210-1: Design Methods for Naval ShipBoard Systems Section 310-1 Electric System Load and Power Analysis for Surface Ships. MIL-STD-2189-314-4: Design Methods for Naval ShipBoard Systems Section 314-4 400 Hertz Power System Test Procedures. MIL-STD-2196: Glossary, Fiber Optics. MIL-STD-2200: Requirements for Employing Standard Enclosure Systems.

Loren Data Corp. http://www.ld.com (SYN# 0485 19950830\SP-0001.MSC)


SP - Special Notices Index Page