Fleet and Industrial Supply Center, Purchasing Division, Code PSCC, Bldg 334/3 NI Site, 937 North Harbor Drive, San Diego, CA 92132-5075

39 -- CORRECTION: BELT CONVEYOR SOL N00244-95-Q-C516 POC Gwen Young, Lead Purchasing Agent, 619-545-3869, Fran Sedlacek, Contracting Officer, 619-545-4176, Fax 619-545-5565 or 619-545-4501. CORRECTION: This action was originally published in the CBD dated 8/15/95. The descriptive should have read as follows: FISC-PSCC is announcing its intent to issue a sole-source procurement to Mayfran International under authority of FAR 6.302-1. Inquiries from potential bidders of an equivalent product are welcome. Item to be procured is as follows: Steel Belt Conveyor, Mayfran drawing P34392A, Rev. O - 30'' belt width, Belt Path Style: D-D at 35 degrees, horizontal-inclined-horizontal- inclined-horizontal, Discharge Height: 6'0'' above fllor to underside of conveyor, Horizontal Projection: 44' 6-5/8'' between centers of head and tail sprockets, Vertical Projection: 5'9-5/16'' between centers of head and tail sprockets, Lower Horizontal: 6' 10'' measured from center of tail sprocket to bottom curve, Upper Horizontal: 1'6'', Drive: 1-1/2 HP, Speed: 20 FPM, constant, Material Handled: Paper at a rate of two tons per eight hour day, FRAME - Side Panels: Formed #7 gauge steel with enclosed tracks and belt guides, Access Door: Conveyor sides will have one pair of removable inspection panels, Spreaders: 2'' standard black pipe welded to side panels on 40'' centers and all welded seams, Side skirts: 24'' high on incline and upper horizontal, Load bar: Frame will have one load bar, equally spaced between the carrying tracks to limit deflection of belt under impact, Supports: Conveyor support legs are fabricated from heavy structural shapes, Take-up: Belt adjustment screws shall be located at tail end of conveyor, Bottom guard: Incline and upper horizontal frame section shall have bottom guard with dribble chute, PAINT: Spec: DuPont 25P high solids 2-part epoxy, Color: Mayfran Vista Green, Finish: Satin (10 units on a 60 degree meter). Qty 1 each. All other information published in the original synopsis is correct. See Numbered Note(s): 1, 13, 22. (0244)

Loren Data Corp. http://www.ld.com (SYN# 0144 19950905\39-0001.SOL)