|
COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 12,1995 PSA#1429Army Research Laboratory, Adelphi Site Contracts Branch, ATTN: AMSRL-
OP-PR-AP, 2800 Powder Mill Road, Adelphi, Maryland 20783-1197 34 -- METAL WORKING MACHINERY SOL DAAL01-95-R-9875 DUE 102995 POC Omar
Ali, Contract Specialist, (301) 394-1048, Kathleen M. Tennant,
Contracting Officer, (301) 394-3439. The Contractor shall provide
Fabri-Former IIS or equal Series Brake with CAD/CAM controller equipped
with a 10'Lx8''W machine bed that is equipped with full length 5/8''
wide center slot and die adjusting screws; a hydraulic unit consisting
of steel body hydraulic cylinders with bolt on hydraulic valves; a
measuring system with the distance between the ram and bed measured on
each side with a precision of +/-.0004'' by the optical linear scale
mounted on ram; a heavy duty X-R backgauge that mounts directly to the
bed of the Press Brake; automatic anti-deflection compensation system;
manual one shot lubrication system; lifting links to aid in lifting
4-way dies by the press brake ram; two side safety tang machined in
ram. The Contractor shall provide one (1) Cybelec D&C 900 or equal, 3-D
CAD/CAM control. The Contractor shall provide one (1) 4-way die x 10'
long with 85 degree angles to include hardening. The Contractor shall
install Fabri-Former IIS Series Press Break with CAD/CAM controller and
ensure its proper operation. The period of performance is 2 months. The
proposed contract is being considered for 100% set aside for small
disadvantaged or small business concerns. Interested firms should, as
early as possible, but not later than 15 days of this notice, indicate
interest by providing to the Contracting Officer above evidence of
capability to perform and a positive statement of eligibility as a
small disadvantaged or small business concern. If adequate interest is
not received from small disadvantaged or small business concerns, the
solicitation will be issued as unrestricted without further notice.
Therefore, replies to this notice are requested from all business
concerns. All responsible sources may submit a bid or proposal which
will be considered by the Agency. No telephone requests will be
honored. (0251) Loren Data Corp. http://www.ld.com (SYN# 0235 19950911\34-0001.SOL)
34 - Metalworking Machinery Index Page
|
|