Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air Force Base, Ut 84056-5825

13 -- PANEL ASSY SOL F42630-95-R-2141 DUE 110195 POC For copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information contact Genee Maero/Likm/(801)775-2093 Item 0001 NSN 1377-ND-062-652GES P/N: 825243-1, Each panel assy consist of 8 pieces of shaped charge/housings which make up the components required to explosively sever aircraft skin and longeron to create an escape hatch. There are 2 ''U'' shaped assemblies measuring 24.29 x 7.38 x 1.23 inches on the top and bottom with 6 straight assemblies 9.9 x 7.38 x 1.23 inches (3 on each side). Housing is plastic material (Kydex) with silicone rubber charge holder. SMDC input/output port on each ''U'' shaped assembly. 8ea. Applicable to: C-17. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 30 Aug 96 8 ea Item 0002 NSN 1377-ND-062-653GES Panel Assy P/N: 825243-2, Each panel assy consist of 8 pieces of shaped charge/housings which make up the components required to explosively sever aircraft skin and longeron to create an escape hatch. There are 2 ''U'' shaped assemblies measuring 24.29 x 7.38 x 1.23 inches on the top and bottom with 6 straight assemblies 9.9 x 7.38 x 1.23 inches (3 on each side). Housing is plastic material (Kydex) with silicone rubber charge holder. SMDC input/output port on each ''U'' shaped assembly. 8ea. Applicable to: C-17. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 30 Aug 96 8 ea Item 0003 NSN 1377-ND-062-655GES Panel Assy P/N: 825244-1, Each panel assy consist of 8 pieces of shaped charge/housings which make up the components required to explosively sever aircraft skin and longeron to create an escape hatch. There are 2 ''U'' shaped assemblies measuring 24.29 x 7.38 x 1.23 inches on the top and bottom with 6 straight assemblies 9.9 x 7.38 x 1.23 inches (3 on each side). Housing is plastic material (Kydex) with silicone rubber charge holder. SMDC input/output port on each ''U'' shaped assembly. 8ea. Applicable to: C-17. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 30 Aug 96 8 ea Item 0004 NSN 1377-ND-062-657GES Panel Assy P/N: 825244-2, Each panel assy consist of 8 pieces of shaped charge/housings which make up the components required to explosively sever aircraft skin and longeron to create an escape hatch. There are 2 ''U'' shaped assemblies measuring 24.29 x 7.38 1.23 inches on the top and bottom with 6 straight assemblies 9.9 x 7.38 x 1.23 inches (3 on each side). Housing is plastic material (Kydex) with silicone rubber charge holder. SMDC input/output port on each ''U'' shaped assembly. 8ea. Applicable to: C-17. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 30 Aug 96 8 ea The approximate issue/response date will be 02 Oct 95. To: Teledyne Mccormick Selph, Hollister Ca 95024 0006. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources may submit a bid, proposal, or quotation which shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty-five days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Don't request information on this requirement until after the issue date. Requests for copies of solicitations must reference the entire solicitation number, including purchasing office identification number. To expedite your request, limit the number of individual solicitation numbers requested per letter to not more than 10. (0255)

Loren Data Corp. http://www.ld.com (SYN# 0255 19950913\13-0001.SOL)