Department of the Treasury (2024), Federal Law Enforcement Training Center, Procurement Division, Bldg. 28, Glynco, GA 31524

69 -- PURCHASE/INSTALLATION OF A REPLACEMENT TARGETRY CONTROL SYSTEM SOL FTC 96-3 DUE 100695 POC Gail Ashurst, Contracting Officer at 912-267-3176 The Federal Law Enforcement Training Center (FLETC), Glynco, (Brunswick) Georgia intends to enter into a negotiated procurement with Caswell International, Minneapolis, MN for the purchase and installation of a replacement Turning Targetry System for eight existing 12-point, 25 yard long Indoor Firearms Training Ranges. Ranges are used for pistol and shotgun training at firing distances varying from 3 to 25 yards. Work shall require removal of the existing targetry system. The new system shall fit into spaces occupied by existing track system equipment and range configuration. Due to the presence of lead in the firing range environment, work requires the services of a State Certified Lead Abatement Contractor. All lead abatement work shall be conducted in compliance with 29 CFR 1910.1025 Subpart Z and 29 CFR 1926.62 Subpart D. Must have at least five years prior experience in the manufacture and installation of electro-mechanical small arms targetry. The targetry system shall include: 1) Individual Target Conveying System consisting of an overhead monorail target tract on which travels a cable operated target carrier car. Target conveyance system includes target carrier drive unit electric motor and cable drive system; 2) Target Carrier Cars consisting of an upper carrier body chassis complete with electric motor operated bi-directional turning target system, electronic control module and mechanical components required for target actuation. Lower carrier body target holder assembly; and, 3) Master and Local Target Control System to allow full-function target operation from the rangemaster's station or from individual shooting lanes. Controls to permit individual or unison target actuation, automatic (programmed) and manually controlled courses of fire. Master controls to consist of data input keyboard, microprocessor, system graphic display indicating system status, target positions, program functions, and diagnostic self-tests. Controls to permit timed courses, starting, stopping, pausing, continuing and restarting programmed course and scenarios. Target stops at 3,7,15, and 25 yard distances. Lcal controls located at each firing point to permit independent keyboard control of targets in manual and pre-programmed operation mode. Local controls to have same functions as master control. Authority 41 U.S.C.253(c)(1). Only one responsible source and no other supplies or service will satisfy agency requirements. This notice is not a request for competitive proposals, however, interested parties may submit written responses to include technical literature for the system. All information should be provided within 15 days after publication of this notice. All such responses will be fully considered by the Government. No telephone responses will be honored. Facsimile responses may be submitted via FAX to (912) 267-3132. A determination by the Government not to complete this proposed contract based upon responses to this notice is solely within the discretion of the Government. A solicitation should be issued to Caswell International o/a October 27, 1995. See Numbered Note 22. (0265)

Loren Data Corp. http://www.ld.com (SYN# 0219 19950925\69-0001.SOL)