|
COMMERCE BUSINESS DAILY ISSUE OF OCTOBER 25,1995 PSA#1459Phillips Laboratory (PL/PKSB), Space Experiments Contracting Division,
3550 Aberdeen Ave. SE, Bldg 592, Kirtland AFB NM 87117-5776 A -- A--INTEGRATED SPACE TECHNOLOGY DEMONSTRATION (ISTD) SOL
F29601-95-R-0037 POC Tammie L. Johnson, Contracting Officer,
(505)846-6923, Lt Col Gary Seigel, ISTD Program Manager, (505)846-4783.
The Integrated Space Technology Demonstration (ISTD) project office,
Space Experiments Directorate, Air Force Phillips Laboratory, is in the
process of defining the first ISTD Warfighter-1. The program will
address through the use of new technologies selected deficiencies and
needs of the Air Force Space Command (AFSPC) as identified in the
current mission area plans (MAPs). It is the intent of the Air Force to
award one contract near the end of FY 96 to proceed with ISTD
Warfighter-1. The goal is to have a launch date of not later than the
fourth quarter of 1999. Earlier dates are acceptable provided they meet
the funding and performance requirements of the RFP. The anticipated
scope of the contract includes design, development, fabrication,
integration & test, launch, and support to on-orbit operations. The
winning contractor team will bid an approach within general guidelines
of the RFP and program objectives specified in the Statement of
Objectives (SOO). The major factor impacting the approach will be a
design-within-budget restriction where the performance will be limited
by the funding available. Analysis of the MAPs led to selection of
tactical reconnaissance and surveillance (R&S) as the mission focus for
the first demonstration. The Warfighter-1 demonstration is planned to
be divided into two parts: technology validation and concept of
operations (CONOPS) for tactical satellites . The goal of the
technology validation is to demonstrate emerging sensor technologies
that will enhance future tactical reconnaissance capabilities. The
major requirements of the payload are: - detection of tactical targets
(autonomous detection is a goal) - autonomous cueing of on-board
sensor or other R&S platforms - geolocation of targets - on-board
processing of data to produce target information - real time payload
control by field units - real time information downlink to field units
- on-orbit life of one year with a three year goal - scaleable and
traceable to an operational system Flexibility in the operation of the
payload to explore variatins in the data obtained with the goal of
validating the optimum sensor operating points is highly desired.
Variations in the number of sensor bands on selected test series would
be one example of sensor operation flexibility. Spacecraft (bus)
technologies are encouraged to a lesser extent and may be limited by
the strong desire to leverage with another space platform. In order to
enhance the performance of the ISTD program and future candidate
operational systems, offerors will be strongly encouraged to bid
maximum use of leveraging in the program. As an example of one
candidate leveraged approach, a compatible commercial space platform
could be used to support the Warfighter-1 mission and payload. Shared
costs would result in enhanced performance for both the Air Force and
commercial organization. The Air Force is considering accepting
approaches where independent use by the contractor of the Air Force
funded payload is a part of the contract terms. The commercial
organization could potentially use data obtained during its time of use
in any of a number of ways. Restrictions are likely on data obtained
during Air Force testing. During the CONOPS portion of the
demonstration, field equipment provided by the Warfighter-1 contractor
to control the payload will be exercised in numerous scenarios. AFSPC
will be responsible for coordinating field command and control of the
sensor to examine various ways to use the sensor to maximum advantage
during future periods of conflict. The contractor provided field
equipment should also include a method for deployed government units to
receive data directly from the spaceborne sensor. Organizations
considering a response to this future RFP are encouraged to contact the
ISTD program manager, Lt. Col. Gary Seigel, at (505) 846-4783 or the
contracting officer (CO), Ms Tammie Johnson, at (505) 846-6923 during
this period of open communications. Written unclassified input on
advantages and disadvantages to the above approach and other comments
will be considered in finalization of the RFP documents. Comments
should be limited to 10 pages and received not later than 14 days after
publication in CBD. The draft SOO is available for review and should be
a part of the data considered when responding to this announcement. The
ISTD Read File is also open to interested companies. To arrange a visit
to the Read File, contact Ms Pat Jancula at (505) 846-5806. To obtain
copy of the SOO, faxed requests should be forwarded to the CO by QCAL
contractors. Fax number is (505) 846-7549. Requests must include a copy
of certified DD Form 2345 with the request. Also include the company
point of contact name and telephone number, mailing address, and fax
number with the request for the SOO. (0296) Loren Data Corp. http://www.ld.com (SYN# 0002 19951024\A-0002.SOL)
A - Research and Development Index Page
|
|