DISA/DITCO/DTS42 2300 East Drive Scott AFB IL 62225-5406

D -- UNISYS FIP HARDWARE MAINTENANCE SOL DCA200-96-Q-0017 DUE 122295 POC CHRISTINA SEVERINO, 618-256-9407 Synopsis number 96017. STANDARD INDUSTRIAL CLASSIFICATION NUMBER (SIC) 7378. THIS IS A SMALL BUSINESS SET-ASIDE; ONLY SMALL BUSINESS CONCERNS WITHIN THE AFOREMENTIONED SIC CODE WILL BE CONSIDERED FOR AWARD. ACTUAL REQUESTS FOR QUOTATIONS (RFQs) WILL BE ISSUED ELECTRONICALLY - HARDCOPY RFQs WILL NOT BE ISSUED; THEREFORE, THERE IS NO NEED TO RESPOND IN WRITING WITH REFERENCE TO THIS CBD NOTICE. The Defense Information Technology Contracting Office (DITCO), Scott AFB, IL, will procure through an electronic bulletin board, the Information Technology Acquisition Bulletin Board System (ITABBS), maintenance services for the following FIP hardware located at either the Defense Megacenter Jacksonville, Jacksonville, Florida, or the Defense Information Processing Center, Norvolk, Virginia: Model 3420-008 Tape Drive, Model 4381-P12 Central Processor, Model 3370-A02 Disk Drive, Model 3370-B02 Disk Drive, Model 3880-001 DASD Controller, Model 7171 Protocol Converter, Model 3174-01L Terminal Controller, Model 3194 Display Terminal Base, Model 3206 Display Terminal, Model 3205-2C Display Terminal, Model 3179 Display Terminal, Model 3278-2 Display Terminal, Model 3191 Display Terminal, Model 3278-2A Display Terminal, Model 4245-20 Printer, and Model 3802-002 Tape Controller. The maintenance will be required on a monthly basis through 30 Sep 96. The anticipated RFQ release date is 08 Dec 95 with quotations expected to be due on 22 Dec 95. Vendor quotations in response to this RFQ must be received in hard copy. Vendors will be able to dial into the electronic ITABBS, and download the RFQ, check the status of the RFQ, and receive amendments and other RFP related correspondence. All responsible sources may submit a quotation which shall be considered. Information from the electronic bulletin board system will either be in ASCII or Microsoft Word for Windows 6.0 format. RFQs are usually a compressed (PKZIP) MS Word file requiring you to have compatible software to extract the file. The ITABBS can be accessed by any FIP vendor through standard hardware and software. To access ITABBS, the necessary communications parameters are 8 data bits, no parity, 1 stop bit, with modem speeds of 1.2 - 14.4 KBPS. ITABBS requiremnts will remain posted until the deadline has passed for submission of vendor proposals. Interested vendors are encouraged to access the ITABBS via telephone number (618) 256-9200 to view all public information. If you experience problems or have any questions, please contact the System Administrator at (618) 256-9380 or the Contract Specialist point of contact listed above between 0800 and 1630 Central Time, Monday thru Friday. SEE NUMBER Note 1 (0326)

Loren Data Corp. http://www.ld.com (SYN# 0033 19951124\D-0001.SOL)