NASA Langley Research Center, Industry Assistance Office, MS 144 Hampton, Va. 23681-0001

A -- COMMERCIAL OPPORTUNITY FOR MANUFACTURING OF PIEZOELECTRIC VALVES POC Linda Fitzgerald, Industry Assistance Office, (804) 864-2461. In order that potential participants may learn of high displacement piezoelectric actuators, sensor materials and devices (THUNDER), a unique high performance thermoplastic and microcomposite adhesive (LARCTM-SI), applications of thunder hardware, and a new thermal coating material for use in the valve manufacturing industry an advanced notice is published here. The THUNDER technology is a new NASA Langley Research Center development which has significantly improved the existing state-of-the-art. Thunder actuators provide inordinately large mechanical output displacements - laboratory demonstrations have shown displacements to be as high as 40-50 times the thickness of the device. THUNDER's output amplitude is an order of magnitude greater than existing devices over the frequency range from DC to several kHz, indicating the capacity for a low- frequency device operation. With further development, THUNDER wafers are expected to operate at lower voltages, allowing their use in some applications unsuitable for other piezoelectric materials, such as artificial heart pumps and other biomedical applications. The THUNDER device owes its unprecedented output motion to the special pre-stressed state of its piezoelectric element. THUNDER devices consist of a piezoelectric layer intimately attached to the pre-stressing layer, using a NASA-LaRC polyimide adhesive. The fabrication process for THUNDER devices is easily controlled resulting in highly uniform devices. In addition, THUNDER devices can be specifically tailored to the desired applications. THUNDER devices can be fabricated using any available piezoelectric materials-not just those containing lead, such as PZT-based materials. NASA envisions using THUNDER devices for valve actuation, optical mount stability control, positioners, noise suppression, pumps, flow shaping, and many other applications. LARCTM-SI is a wholly aromatic high performance thermoplastic possessing a unique combination of physical, mechanical, electrical and adhesive properties that extend its application beyond those of commercial state-of-the-art polymer resins. The most unique property of LARCTM-SI is its solubility in convenional high boiling aprotic solvents. However, when exposed to temperatures above its softening point of 250 degrees C. it becomes insoluble yet retains its melt processability. In addition to this solubility characteristic and high softening point, LARCTM-SI is extremely tough and fracture resistant. It has excellent electrical properties and can be used to bond a variety of metals, ceramics and polyimide films. LARCTM-SI has been used as a particle binder for microcomposites, for near net-shape manufacture of ceramic parts, novel composite particle coatings, mechanical parts wire insulation, heat sinks and carbon-carbon materials. Thermal coating material has been developed to provide enhanced thermal protection for metals and other surfaces. The coating is a proprietary mixture which contains reflective ceramic beads. The application can be painted or trowelled. The material dries under ambient conditions and is easily removable for repairs. It does not contain any components which are toxic to the environment. This notice announces NASA'a interest and desire to enter a joint development and commercialization agreement with private industry to advance the development and testing of these technologies, and to transfer NASA's existing proprietary technology and patent rights resulting from joint work under the development agreement(s) by making it available for license to the joint participant(s) in accordance with NASA's Patent Licensing Regulations. Accordingly, a technical briefing will be held on January 17,1996, at NASA's Langley Research Center, Hampton, Virginia 23681- 0001 to describe the technology, outline the planned Space Act Agreement, and explain the process and criteria under which NASA will select a participant(s). Interested organizations should submit an expression of interest and a statement of qualifications, including: technical experience and competence in the technology, related manufacturing capabilities, experience in commercializing similar products, marketing organization (including resources and capabilities to reach and support targeted markets), and financial status of the firm. This synopsis is for information and planning purposes only and is not to be construed as a commitment by NASA nor will NASA pay for the information solicited. Respondents will not automatically be notified of the results of the evaluation, but those deemed fully qualified will be consideed in any resulting requirement. This is not an announcement of an RFP. Expressions of interest should be submitted by December 19, 1995. Requests for additional information should be directed to Rebecca Watkins (412)-648-7005. In responding reference SS249. (0333)

Loren Data Corp. http://www.ld.com (SYN# 0008 19951130\A-0008.SOL)