Department of the Navy, NAWCAD, Contracts Competency Division, MS32, 22541 Millstone Road, Patuxent River, MD 20670-5304

60 -- BRAND NAME OR EQUAL FIBER OPTIC CABLE AND RELATED EQUIPMENT. SOL N00421-96-R-5020 DUE 012296 POC Contract Specialist Regina Morgan, (301) 342-1833 ext. 117, Contracting Officer Clare Carmack (301) 342-1833. The Naval Air Warfare Center Aircraft Division has a requirement for brand name or equal fiber optic cable and related equipment: Traditional singlemode fiber Siecor XXXR14-14100-20 (where XXX is fiber strand count) or equivalent, specifications: to be pulled in existing innerduct, must have .35/.25 dB/km @ 1310/1550nm attenuation or better, 8.3/125 micron singlemode fiber, loose tube cable, dielectric central member, maximum tensile rating 2700N (600 pounds) Fiber Count: 96 strand 100,000 feet, 48 strand 25,000 feet, 24 strand 25,000 feet, 12 strand 25,000 feet; Traditional multimode fiber Siecor XXXK14-14110-20 (where XXX is fiber strand count) or equivalent, specifications: to be pulled in existing innerduct, must have 3.5/1.0 dB/km @ 850/1300nm attenuation or better, 62.5/125 micron multimode fiber, loose tube cable, dielectric central member, maximum tensile rate 2700N (600 pounds), Fiber Count: 24 strand 50,000 feet, 12 strand 25,000 feet; Armored Traditional singlemode fiber Siecor XXXR15-14100-20 (where XXX is fiber strand count) or equivalent, specifications: to be pulled in existing innerduct, must have .35/.25 dB/km @ 1310/1550nm attenuation or better, 8.3/125 micron singlemode fiber, loose tube cable, dielectric central member with armor, maximum tensile rating 2700N (600 pounds), Fiber Count: 96 strand 100,000 feet, 48 strand 25,000 feet, 24 strand 25,000 feet, 12 strand 25,000 feet; Armored Traditional multimode fiber, Siecor XXXK15-14110-20 (where XXX is fiber strand count) or equivalent, specifications: to be pulled in existing innerduct, must have 3.5/1.0 dB/km @ 850/1300nm attenuation or better, 62.5/125 micron multimode fiber, loose tube cable, dielectric central member with armor, maximum tensile rating 2700N (600 pounds), Fiber Count: 24 strand 50,000 feet, 12 strand 25,000 feet; 19''x7' equipment racks, specifications: 15 Amp 6 outlet power protection strip with at least 6 foot cord, vertical cable management section, floor mounting hardware, ground block terminal for block grounding, shelves will bolt to the equpment rack and provide a shelf surface of 19''x24'', raceway will bolt to and connect rows of racks, items: 19''x7' equipment racks 500 each, shelves for racks 1,000 each, raceway 20,000 feet; 19''x7' equipment cabinet 200 each; specifications: 15 Amp 6 outlet power protection strip with at least 6 foot cord, vertical cable management section, floor mounting hardware, ground block terminal for block grounding, closing lockable doors, cooling fans, include 2 shelves per cabinet; Outside Cable Entrance Facility (OCEF) AT&T OCEF1-288/22 and OCEF1-720-42 or equivalent, specifications: must support a minmum of 12 splice organizer trays for the large OCEF and 30 splice organizer trays for the small OCEF, wall mountable, must accommodate cables of up to 1.6 inches in diameter, must provide strain relief for tube cable and fiber, must include work shelf, Sizes: large OCEF 50 each; small OCEF 100 each; Splice Organizer Trays AT&T LT1A-F/F or equivalent, specifications: must be compatible with AT&T OCEF1-288/22 and OCEF1-720-42 or equivalent, each splice organizer tray must support a minimum of 24 fusion splices, must provide strain relief for fiber, must provide storage area for fiber slack; Fiber Patch Panel AT&T LST1U-072/7 patch panel or equivalent, specifications: 72 port or large fiber patch panel, must support SC type connectors; Fiber Pigtails, AT&T LDM-0631-58 100 feet single mode pigtails or LDM-0631-39-063 100 feet multimode pigtails or equivalent, specifications: must be compatibel with patch panel AT&T LST1U-072/7, must be compatible with patch panel AT&T LST1U-072/7, must have 3.5/1.0 dB/km @ 850/1300nm attenuation or better for 62.5/125 micron multimode fiber, must have .35/.25 dB/km @ 1310/1550nm attenuation or better for 8.3/125 micron singlemode fiber, 100 foot pigtails with SC Connectors for both single mode and multimode fiber, must have a minimum of 12 SC connections per pigtail, Type: single mode pigtail 1,000 each, multimode pigtail 500 each. Deliver to Receiving Officer, MS31, Bldg #665, Naval Air Warfare Center Aircraft Division, Patuxent River, MD 20670-5304, 30 days after date of order. It is anticipated that an Indefinite Delivery/Indefinite Quantity (IDIQ) type contract with provisions for firm fixed price orders will be awarded for one base year and four option years. All responsible small business sources may submit an offer which shall be considered by the Navy. See Noe: 1. (0353)

Loren Data Corp. http://www.ld.com (SYN# 0218 19951220\60-0001.SOL)