Oc-Alc/Dir Contracting/Commodities, 3001 Staff Dr Ste 2ah77a, Tinker Air Force Base Ok 73145-3028

29 -- SANDWICH ASSY, BONDED SOL F34601-96-R-0026 DUE 030896 POC For copy, OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact Eddie Upshaw/Lidac/(405)739-4347 Item 0001 NSN 2995-00-604-0747 P/N: LM-200-62, Dim: approx 4 inches square by 1 inch thick. Func: absorbs vibration between airframe. Matl: natural rubber and heat treated aluminum. Quantity is estimated annual quantity. 1686ea. Applicable to: C130 Acft. Destn: Tinker Air Force Base Ok 73145-3028. Item 0002 NSN 2995-00-604-0748 Sandwich Assy, Bonded P/N: LM-200-63, Dim: Approx 3.5 inches long x 1.5 inches wide. Matl: Natural rubber elastometer sandwiched between two metal plates and bonded thereto. Qty is estimated annual quantity. 1777ea. Applicable to: C130. Destn: Tinker Air Force Base Ok 73145-3028. Item 0003 NSN 2995-00-610-2757 Bracket,Turbo Prop P/N: LM-200-64, Dim: Approx 4 x 6.5 inches. Func: Absorbs vibration. Matl: Forged steel and various materials. Qty is estimated annual quantity. 180ea. Applicable to: C-130. Destn: Tinker Air Force Base Ok 73145-3028. Item 0004 NSN 2995-00-676-0208 Mounting, Engine Rear P/N: LM-200-67, Dim: Approx 3.5 in dia x. 25 in. Func: Attaches engine to airframe and controls vibration between engine and airframe. Matl: Bonded rubber to metal sandwich construction. Qty is estimated annual usage. 2005ea. Applicable to: C-130. Destn: Tinker Air Force Base Ok 73145-3028. Item 0005 NSN 2995-00-676-5982 Isolator, Tube Form Mounting P/N: LM-805-1, Item is a isolator, tube form mounting, flanged approximately 3.00 in o.d. X 0. 375 in i.d. X 2.50 in long. Bushing forming the i.d. The rubber surrounding the inside bushing and the flanged outside bushing are a single bonded unit formin g the flexible element for the suspension. Material is steel and rubber. Mount used to support the engine to the airframe. Qty is estimated annual usage. 204ea. Applicable to: C-130. Destn: Tinker Air Force Base Ok 73145-3028. Item 0006 NSN 2995-00-700-3610 Washer,Snubbing P/N: LM-805-2, Dim: 3 inches in diameter; Matl: steel. Qty is estimated annual usage. 100ea. Applicable to: T37. Destn: Tinker Air Force Base Ok 73145-3028. Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The qualification requirements for this item were established prior to 19 Oct 1984 and the requirements of FAR 9.202(A) do not apply. These qualification requirements apply to line item(s) - all items There are 11 additional items(s) in FSC(s) 29,53 Government may award an ID/IQ contract, with 3 option years, for replenishment spare component parts for NSN 2995006760208 P/N LM-200 & T37 engine mounts. The approximate issue/response date will be 07 Feb 96. To: Lord Corporation, Erie Pa 16514-0039. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER (405)739-5411. (0018)

Loren Data Corp. http://www.ld.com (SYN# 0167 19960119\29-0001.SOL)