|
COMMERCE BUSINESS DAILY ISSUE OF FEBRUARY 6,1996 PSA#1525Oc-Alc/Dir Of Contracting/Propulsion, 3001 Staff Dr Ste 1ag81, Tinker
Air Force Base Ok 73145-3032 J -- OVHL/REPAIR TF-33 BEARINGS SOL F34601-96-R-54979 DUE 032296 POC
For copy, Donna Hester/Lpdpa/(405)739-5394, For additional information
contact Donna Hester/Lpdpa/(405)739-5394 A firm fixed price
requirements contract is contemplated for one year with two one-year
priced options for the repair/overhaul of various Main Engine Bearings
on the TF-33 Engine. There are eight (8) solicitation line items, four
of which are listed in a representative manner as follows: Item 0001:
No. 2 1/2 Bearing - Input/Output NSN 3110-00-105-5346RV, P/N 488750 and
various other NSNs and P/Ns. This is a Ball Bearing measuring 5.9053''
OD X 4.3305'' wide; material: races and balls - steel, cage - silver
plated steel; provides support for No 3 bearing carbon seal; BEQ: 1st
Year - 4 Ea, 2nd Year - 150 Ea, 3rd Year - 59 Ea. Item 0003: No. 6
Bearing - Input/Output NSN 3110-00-293-9192RV, P/N 237903 and various
other NSNs and P/Ns. This is a Roller Bearing measuring 7.480'' OD X
5.1179'' ID X 1.4540'' wide; material: races and rollers - steel, cage
- silver plated silicon bronze; provides radial support for low speed
turbine rotor; BEQ: 1st Year - 110 Ea, 2nd Year - 73 EA, 3rd Year - 55
Ea. Item 0004: No. 1 Bearing - Input/Output NSN 3110-00-103-7244RV, P/N
488672 and various other NSNs and P/Ns. This is a Roller Bearing
measuring 130mm X 180mm; material: races and rollers - steel, cage -
silver plated silicon bronze; provides radial support for front
compressor front hub; BEQ: 1st Year - 278 Ea, 2nd Year - 246 Ea, 3rd
Year - 140 Ea. Item 0007: No. 5 Bearing - Input/Output NSN
3110-00-864-9269RV, P/N 519755/519758/769554/769555. This is a Roller
Bearing measuring 6.7461'' OD X 4.8939'' ID X 1.490'' wide; material:
races and rollers - rollers - steel, cage - silver plated steel;
provides radial support for high speed turbine; BEQ: 1st Year - 10 Ea,
2nd Year - 10 Ea, 3rd Year - 10 Ea. Delivery for all items is 30 Days
After Receipt of Order and Repairables. Qualification requirements:
Sources must be qualified prior to being considered for award. The
solicitation will contain instructions for obtaining further
information on this requirement. The qualification requirements for
this item were established prior to 19 Oct 1984 and the requirements of
FAR 9.202(A) do not apply. These qualification requirements apply to
line item(s) ALL The approximate issue/response date will be 21 Feb 96.
To: Bearing Inspection Inc, Santa Fe Springs Ca 90670-3401. To:
Precision Bearing Center, West Lebanon Nh 03784 1669. No telephone
requests. Only written or faxed requests received directly from the
requestor are acceptable. All responsible sources solicited may submit
a bid, proposal, or quotation which shall be considered. Award will be
made only if the offeror, the product/service, or the manufacturer
meets qualification requirements at the time of award in accordance
with FAR clause 52.209-1. The solicitation identifies the office where
additional information can be obtained concerning qualification
requirements as cited in each individual solicitation. Note: An
Ombudsman has been appointed to hear concerns from offerors or
potential Offerors during the proposal development phase of this
acquisition. The purpose of the Ombudsman is not to diminish the
authority of the program director or contracting officer, but to
communicate contractor concerns, issues, disagreements, and
recommendations to the appropriate government personnel. When
requested, the Ombudsman will maintain strict confidentiality as to
source of the concern. The Ombudsman does not participate in the
evaluation of proposals or in the source selection process. Interested
parties are invited to call the Ombudsman at (405) 736-3273. DO NOT
CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation
requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015,
FAX NUMBER (405)739-5411. Request for Written Quotation will be issued.
The anticipated award date will be 60 days after the issuance of this
notice. See Note (s) 9. (0033) Loren Data Corp. http://www.ld.com (SYN# 0040 19960205\J-0001.SOL)
J - Maintenance, Repair and Rebuilding of Equipment Index Page
|
|