OSD/WHS/RE&F/SSD, Room 3C345, The Pentagon, Washington, DC 20301

75 -- HIGH DENSITY MOVABLE SHELVING Sol MDA94696T0742, Due 041596, POC Sharon A. Ward, Contract Specialist, 703-695-5185. Movable shelving must be a modular deck system which will accommodate a minimum of 51,000 linear filing inches for letter size files. The system must not be anchored to the floor and subject to levelness of floor. The system must have: independently adjustable shelves to allow for on site adjustments without the need of special tools and quick repositioning when size of media stored changes; removable back stop on each shelf for pass through capability and storage of larger objects while keeping a standard shelf dimension throughout the system; each shelf must be able to support 125 lbs. without any deflection with the first shelf being flush with the top of the carriage to provide maximum height utilization; each carriage must be able to support 1000 lbs. per lineal foot; a recess of at least five inches designed to restrain the uprights for stability of the uprights making it impossible for shelving to become dislodged from the carriage; taper spoke mechanical handle on every carriage which allows the operator to move 30,000 lbs. comfortable; no gaps beside rails. Ramps to the floor should not extend beyond the system panels. Canopy tops are to be bolted to the uprights for safety concerns. Flooring material must be black, ribbed rubber, for safety. The government will provide carpet tiles for areas outside of the system, but within the assigned room in the AMC building, second floor. Color should be gray, with maroon accent. The mechanical assist shelving is to include: center flanged wheels; self-adjusting pillow block bearings; full length drive shafts modular deck system; aisle lock plus passive aisle security system; cantilever shelves formed of 18 gauge steel; non-slotted adjustable divider to be placed anywhere on shelf; shelf load of 125 lbs; letter shelves independently adjustable on both faces; reinforced structural canopy top. Specification: (subject to change after final floor plan received from architectural engineer); Height: 77-1/2'' to canopy top (unshimmed) w/canopy top inverted; Width: 79'' O.A; Depth: 15'' 8'' O.A; Capacity: 51,462 filing inches; Weight to Media: 102,924 lbs (est) using 2 lbs per filing inch w/100% load; Weight of System: 36,000 lbs (est); Aisle: (5) 48'' - 60''; Square Feet: 1,185'; Materials: 22-Double Face Movable Ranges - RMMDOLT7-15; 1-Single Face Fixed Range - RMMSOLT7-15; 4-Double Face Fixed Ranges - RMFDOLT7-13; 4-Guide Rail-1240F; 2-Flat Rail -1250F; 12-Stainless Ramp Plate-RU-1230; 5-Backs-RU-1670; 3-Rail Stop-RU-1257; 26-Smart Aisle-Mod. Arm Reach-RM-2000; 22-Fold Down Handle-RU-0501; Ribbed Rubber Flooring-** The above specs and materials were based from a sample chosen from Elecompack System EL. Bids will be accepted only for best grade of brand name or equal to assure highest quality and performance. System must be installed by factory certified installers to insure proper installation. A manufacturer's warranty against defects for at least 10 years must be provided in writing. All components of the offered equipment must be produced by one manufacturer. All responsible sources may submit an offer which will be considered. Bids will be accepted only by mail or by Fax 703-693-6807. No telephone requests will be accepted. (068)

Loren Data Corp. http://www.ld.com (SYN# 0449 19960312\75-0001.SOL)