|
COMMERCE BUSINESS DAILY ISSUE OF MARCH 29,1996 PSA#1562U. S. Postal Service, Purchasing and Materials Service Center, P.O. Box
667190, Dallas, TX 75266-7190 36 -- SPECIAL INDUSTRY MACHINERY - POTENTIAL SOURCES SOUGHT SOL
Pending. Contact Dan Rose, General Engineer, Purchasing Specialist,
(405) 573-2115 - Maintenance Technical Support Center, Norman, OK,
(405) 573-2115. Dust Collector Kits to include: dust collector, duct,
hose, and attachment plenum. The U S Postal Service is attempting to
identify vendors who can supply dust collectors which meet the
following minimum requirements: 1) 1200 CFM at 12 inches total static
pressure; 2) noise level - 75db or less; 3) inlet 8 inches at top of
collector; 4) outlet 8 inch minimum at top of collector; 5) footprint
34 inches by 39 inches max; 6) automatic filter cleaning-not using
compressed air; 7) 99% efficiency on 1 micron or larger particulate; 8)
UL approved; 9) automatic start circuit controlled by 110VAC signal;
10) 208 VAC supply voltage; and, 11) dust-proof enclosures for
controls. Ducts, hoses, and attachment plenum will be per USPS supplied
drawings. A one-year warranty on parts is required plus an additional
five-year parts availability on a next-day basis. The selected supplier
must install two units at a test site, and must demonstrate capability
of deploying fifty units per month FOB destination to sites throughout
the United States. Installation of equipment will be performed by USPS
personnel. Responses must be addressed to the Maintenance Technical
Support Center, Attn: Dan Rose, PO Box 1600, Norman OK 73070-6708 and
information must be provided at no charge. Responses will be accepted
for inclusion in a bidders list for 15 calendar days following
publication of this notice. Request for solicitation must be in writing
and received within 10 days after the date of this notice or until
supply is exhausted. (085) Loren Data Corp. http://www.ld.com (SYN# 0267 19960328\36-0001.SOL)
36 - Special Industry Machinery Index Page
|
|